17/2020-21(EDCR) Releasing new connections, 170 KVA, HV-2 to M/S Rehan Rice Mill, Lala Nagala, Kemri, 170 KVA HV-2 to M/S Noor Rice Mill, Talmahawer, Kemri and 160 KVA HV-2 to M/S Ghause Rice Mill, Kemri, Bilaspur, Rampur

Amount

Carriage of the following material from Store Centre, Majhola to work site including loading & unloading.

8.5 Mtr long PCC Pole.

11 Mtr Long ST pole

11 KV XLPE cable of size 3x70/3x120 sq.mm.

ACSR weasel conductor & other line material such as X-arm, Cable Jointing kit

CT/PT unit 10/5A

Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms. a) Single support

8.5 Mtr long PCC Pole

11 Mtr long ST pole

Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size. b) Double pole structure

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr long PCC Pole

11 Mtr long ST pole

b) Double pole structure

8.5 Mtr long PCC Pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Filling & fixing of 11 KV outdoor type cable jointing kits suitable for 3x120sq.mm. XLPE cable.

Laying, sagging, stringing and binding etc of ACSR Weasel Conductor on the newly erected poles as per RESPO Norms and as per direction of Supervising Engineer.

Spreading ,stringing and binding of XLPE Cable of size 3x70 sq.mm.(overhead)

Providing & Fixing of Danger board with clamp

Installation of CT/PT unit of ratio 10/5 Amp on double pole including making connection etc.

Guarding of 11 KV line on Road Crossing

munfad electricals

Shanu Traders

RADHEY ENGINEERS

Om Enterprises