REPAIR REPLACEMENT OF JOINERY PLUMBING SANITARY FITTINGS PLASTERING FLOORING AND ALLIED WORKS AT SAILORS INLIVING AREA FIRST LT LOGISTIC COMPLEX MT POOL MULTI FACILITY COMPLEX CSD AND PUBLIC UTILITY BUILDINGS ETC UNDER AGE BR II MAINT AT INA EZHIMALA

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges etc complete all as specified and as directed.

M&L for filling concrete inside frame in PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F 30mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr complete all as specified and as directed.

S&F 30mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed.

S&F 100mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm mild steel butt hinges cold rolled medium weight complete all as specified and as directed.

S&F 100mm butt hinges cast brass, with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and as directed.

S&F in repairs 100mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs 75mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repairs 100mm extruded anodised aluminium alloy handles fabricated type complete all as specified and as directed.

S&F in repairs mortice lock brass body, 100 mm, 4 levers vertical type complete all as specified and as directed.

S&F in repairs 75 mm hasp and staple mild steel safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door complete all as specified and as directed.

S&F in repairs aluminum (die cast) body door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F in repair aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repairs 75mm long anodised aluminium handle cum lock for sliding window/ventilator shutter complete all as specified and as directed.

S&F in repairs mild steel friction hinges suitable for window/ ventilator shutters complete all as specified and as directed.

Taking down aluminium shutters exc 1.00 sqm and n exc 2sqm each (without taking out frame) and refixing in the same positon after carrying out repairs and provision of aluminum tie rod at top and bottom rails complete all as specified and as directed.

Taking down and refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm in same opening after easing and adjusting complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

M&L for aluminium powder coated windows and ventilator shutters etc. side hung type without sash bars,aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc.(minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated door shutter, side hung type aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc.(minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

S&F aluminium powder coated frame for partitions, doors, windows, ventilators with one or more rebates including joining cleats for fixing etc.(minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.

M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair as per manufacturers instructions complete all as specified and as directed.

All as per item No 30 above but fixing only complete all as specified and as directed.

S&F in repair anodised aluminium snap grid frame work for false ceiling. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers. The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM complete all as specified and as directed.

M&L for 4mm thick non-asbestos fiber cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.

M&L for seamless calcium silicate ceiling 12mm ,made out of 1800 x 1200 mm size board of siliceous and calacareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200 mm centre to centre , including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape provide seam less finish fibre tape to provide seam less finish ( Frame work for ceiling shall be measured and paid seperately) complete all as specified and as directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F in repair 18/19mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.

M&L for hacking out old broken glass ( any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed.

M&L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed. Note:- Aluminium beading shall be measured and paid separately.

M&L for 5.5mm thick sheet glass plain ordinary quality exc 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F in repair vitreous china wash basin,coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (EWC) with seat cover coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F in repair vitreous china, wash down water closet (pedestal pattern), cascade type including flushing cistern with seat cover coloured, closed pattern with flat bottom and cover with chromium plated mild steel or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type, coloured, with and including all fixing accessories complete all as specified and as directed.

S&F in repair vitreous china urinal partition, coloured, with and including all fixing accessories complete all as specified and as directed.

S&F plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair brass chromium plated towel ring complete all as specified and as directed.

S&F in repair 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated toilet paper holder complete all as specified and as directed.

S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and as directed.

S&F in repair chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.

S&F15/20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia complete all as specified and as directed.

S&F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/ sink complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks type B1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.

All as per item 67 above except PCC blocks complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 350x250x7mm / 450x350x7 mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 300 x 200 x 7mm mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

M&L for vitrified colourd ceramic tiles 10mm thick (square/ rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and poointed in white or coloured cement to match the shade including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for vitrified colourd ceramic tiles 10mm thick (square/ rectangular), light shade polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and poointed in white or coloured cement to match the shade including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and poointed in white or coloured cment to match of light shade including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.

Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc.. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6; and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid , jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and as directed.

M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by engineer in charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and as directed.

All as per item No.84 above but except tiles complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for hardcore of guage n exc.63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) 100mm thick as in sub base complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing and make impressions while concrete is green complete all as specified and as directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' including necessary formwork etc complete all as specified and as directed.

Cleaning of choked particle from filter system of automatic sensor urinal unit removing top cover of urinal and cleaning automatic sensor unit for removing dust particle etc and making the unit in serviceable condition complete all as specified and as directed.

Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 and n.exc 500 ltrs complete all as specified and as directed.

Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 500 and n.exc 1000 ltrs complete all as specified and as directed.

Taking down defective/damaged water storage tank cover and supply & fix polyethylene tank cover with necessary locking arrangement all as specified and directed at site.

S&F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as speciifed in SSR Part I of capacity 500 ltrs with ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed with dia of pipe 25mm complete all as specified and as directed.

All as per item No.95 above but 1000 ltr capacity complete all as specified and as directed.

S&F urinal spreader of brass chromium plated and flush cock (lever type) 25mm of Cat Part No. KBEA -32 of Prayag or equivalent complete all as specified and as directed.

S&F in repairs flush kit of low level flushing cistern of cascade type WC complete all as specified and as directed.

S&F solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers at a height approx 20m including errection of necessary scaffolding complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet tile pattern 0.50mm thick of approved colour& pattern having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down of cement plaster of any description or thickness/ chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured & paid separately.

M&L for rendering on fair faces of brick work or concrete surfaces 10mm thick in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering on fair faces of brick work or concrete surfaces 10 mm thick in CM 1:3 in celing finished even and smooth without using extra cement but using water proofing compound complete all as specified and as directed.

M&L for preperation of new plastered surface and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer all as specified and as per manufacturer's instructions.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of santex matt over a coat of primer on wall as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Dismantling rolling shutters of area not exceeding 20 Sqm fixed to wall and refixing the same after carrying out the following repairs/ rectification including necessary scaffolding :- (a) Supply and fixed in repair of safety lever locks mild steel with levers for rolling shutters complete all as specified. (b) Supply and fix in repair of MS spring for rolling shutters complete all as speciifed. (c) M&L for cleaning of rolling shutters and applying grease on steel surfaces inside channels for smooth functioning of all steel members complete all as specified. (d) supply and fix in repair of MS tie rod as required. (e) Supply and fix in repair interlocking lath section. (f) S&F ball bearing on either side. (g) S&F MS push plate.

p a hameed

PADMANABHAN. K.V

SANDR

GMS Builders