PW2-24615/23Electrical Works in Foot Over Bridge at Vadakke Bus Stand

Amount

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)DB 4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A four pole isolator

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required.Single Pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A four pole RCCB

Supplying and fixing following size / modules Gl box alongwith modular base and cover plate for modular switches in recess etc. complete. 12 Module GI box (200 mm X 150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6A Switch

6A 3 pin Socket

16A Switch

Supply and drawing for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel or PVC conduit as required.5 X 4 sq. mm wire

3 X 2.5 sq. mm wire

5 X 2.5 sq. mm wire

Supplying, drawing and connecting of one number the following size FR LS, PVC Insulated and PVC sheathed round cable with copper conductor of 1.1 KV grade for interconnecting etc complete.3 core1.5 sq.mm (48/0.20 mm)

Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case reccessed counduit as required.20 mm PVC conduit

25 mm PVC conduit

Supplying, fixing, testing and commissioning of Square/circular and reflected type ceiling down 15W LED light using standard accessaries, (Model Crompton, Philips, Bajaj ) Wiring with 16/0.02mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire and giving connections etc complete.

Supplying, installing, testing and commissioning LED Flood light 50W, 240V, 50Hz, ( Model Havells, Bajaj, Philips, Crompton ) IP65 flood light luminaire with high power light source with secondary optics: reflector made up of high purity matt finish anodized aluminium sheet and built-in isolated electronics LED driver ensures zero maintenance as per IS 15885 Part-2/Sec 13. Including provide suitable clamps for fixing the light etc. complete as required.

Supplying, installing, testing and commissioning LED Street light 70/72 W, 240V, 50Hz ( Model Havells, Bajaj, Philips, Crompton ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supplying and fixing of junction box ( make Sintex ) of size 200x150x100 mm for fixing single phase connector, including fixing clamp etc. complete..

Supply and fixing single phase 6A connector with earth in existing box with connections etc complete.

Supply, fabricating & fixing clamp for fixing light The clamp fabricated by using GI flat of size 50x5 100mm lengrth and required bolts and nuts used for fixing the clamp on roof stracture etc complete.

Supply and fitting 24 hours Anolog Timer switch ( make L& T67 DDTO) with SS enclossur supply voltage 230 V 50 Hz for operating automatic on/off function with IP53 grade protection, operating temperature 10 º C - 50º C, contact>16 A for controlling -main contact-1 Nos and giving connections etc complete.

Supplying, installing, testing and commissioning 63 A, 415 V, Triple Pole with Neutral Link, switch disconnector fuse unit in 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with rewire able porcelain fuses, interconnections, earthing etc. as required.

Supply and fitting 32 A, 415V Kitkat rewireable (Porcelain Fuse carrier & Base) type fuse unit in the existing fuse box and giving connections.

Supplying and Fixing charges of Three phase meter chamber with inspection type front door,size 600x450x200mm, made of MS sheet16SWG and flats neatly painted,including provison for fixing Fuse units and Three phase energy meter directly on wall using proper bolts ,nuts etc.and making good the surface of wall etc. complete

Supply and drawing copper conductor for earthing as required. 3.14 mm dia (10 SWG )

Providing independent ordinary pipe earthing using 1.50 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt ,charcoal bolts and nuts etc. complete required at site.

ANAND T THAZHATHA