Himachal

Active

Works

Civil Works

Construction of Govt. Senior Secondary School (Boys) at Kunihar Tehsil Arki, District-Solan HP.

Public Works Department

Arki | Solan, Himachal Pradesh

Amount: ₹8.6 LCloses: 11 Oct 20264d left

Timeline

Published4 Oct 2026
Closes11 Oct 2026
Bid Opening12 Oct 2026

Tender Value

₹8.6 L

EMD Value

₹18,000

Closing Date

11 Oct 2026, 6:00 pm4d left

Tender Inviting Organisation

Name

EE Arki

Address

HPPWD DIVN ARKI

Work Description

Construction of civil work in Examination Hall of second floor) Under DMFT (PMKKKY).

Tender Information

Tender ID

2026_PWD_144959_1

Reference Number

NIT NO. 8124-29 DT. 25.09.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

Arki

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER SBD

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

RequiredCost of Form and Earnest Money. (.pdf)

RequiredContractors registration refers general rules and directions No 24.3 of SBD. (.pdf)

RequiredGST registration and latest GST return. (.pdf)

RequiredEPF registration with latest return. (.pdf)

RequiredFill Form NO 7/8 of SBD as per Directions and Rules No 24.8 and upload PDF documents. (.pdf)

RequiredAffidavit Reg. litigation with the Department if any and not indulged in submission of fake document (.pdf)

RequiredAn affidavit that information furnished with the bid (Name of work) is correct in all respect. (.pdf)

RequiredContractor should submit mobile number and Email address. (.pdf)

RequiredCopy of PAN. (.pdf)

RequiredList Of Both Gazetted And Non-Gazetted Hppwd Employees Related To Him (General Rule No 14) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹18,000

Important Dates

Last Activity

4 Oct 2026

Published

4 Oct 2026

Bid Opening

12 Oct 2026

Download Starts

4 Oct 2026

Download Ends

11 Oct 2026

Submission Starts

4 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (28 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing form work with steel plates 3.15mm thick welded with angle ron in frame30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs, and removal of the same for insitu-reinforced concrete & plain concrete workinCentering and shuttering including strutting, proping etc, and removal for the same complete including carnage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge
1.1	Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 metre in depth in all heights from floor	5.58	Sqm	387.15	₹2,160.3
1.2	Flat surfaces such as soffits of suspended floors, roofs, landings and the like	17.05	Sqm	468.3	₹7,984.52
1.3	Stair cases (except spiral stair cases) excluding but including preparing of the surface and finishing of the nosing upto all floor level complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	12.3	Sqm	444.4	₹5,466.12
2Providing and laying in position specified grade of reiforceed cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-work upto floor two level complete and as per HP. PWD specifications of 1990 volume-1. including carriage of all, labour, equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges
2.1	1:1.50:3 (one cement isto one point five course sand isto three graded stone aggregate 20.00 mm (twenty milimeter) nominal size (Lintels, beams girders bressumers and cantilevers upto floor two level) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	2.9	Cum	7,835.75	₹22,723.68
3	Providing hoisting and fixing above plinth level upto floor five level Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level but excluding the cost of required centering shuttering with 1:1.5:3(one cement, one point five sand, three graded stone aggregate twenty milimetre nominal size (including carmage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer in-Charge	1.72	Cum	7,950.75	₹13,675.29
4	Steel reinforcement for reinforced cement concrete work including cutting/bending. binding and placing in position complete including cost of binding wire upto floor all level including camage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge (a)Tor steel.	841.2	Kg	75.4	₹63,426.48
5	Brick work with common bunt clay building bricks F.P.S (Non modular) bricks of class designation 7.50 (seven point five) in super structure above plinth level upto all floor all levels in all shapes and sizes in cement mortar 1:6 (One cement Six sand) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	24.74	Cum	6,164	₹1,52,497.36
6	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base lies of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Chargee:	13.2	Rmt	451.9	₹5,965.08

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.51 MB

Work Item Documents

1GSSSKunihar.pdf

Tender Documents • 4.63 MB

BOQ_215736.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing form work with steel plates 3.15mm thick welded with angle ron in frame30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs, and removal of the same for insitu-reinforced concrete & plain concrete workinCentering and shuttering including strutting, proping etc, and removal for the same complete including carnage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge
1.1	Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 metre in depth in all heights from floor	5.58	Sqm	387.15	₹2,160.3
1.2	Flat surfaces such as soffits of suspended floors, roofs, landings and the like	17.05	Sqm	468.3	₹7,984.52
1.3	Stair cases (except spiral stair cases) excluding but including preparing of the surface and finishing of the nosing upto all floor level complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	12.3	Sqm	444.4	₹5,466.12
2Providing and laying in position specified grade of reiforceed cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-work upto floor two level complete and as per HP. PWD specifications of 1990 volume-1. including carriage of all, labour, equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges
2.1	1:1.50:3 (one cement isto one point five course sand isto three graded stone aggregate 20.00 mm (twenty milimeter) nominal size (Lintels, beams girders bressumers and cantilevers upto floor two level) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	2.9	Cum	7,835.75	₹22,723.68
3	Providing hoisting and fixing above plinth level upto floor five level Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level but excluding the cost of required centering shuttering with 1:1.5:3(one cement, one point five sand, three graded stone aggregate twenty milimetre nominal size (including carmage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer in-Charge	1.72	Cum	7,950.75	₹13,675.29
4	Steel reinforcement for reinforced cement concrete work including cutting/bending. binding and placing in position complete including cost of binding wire upto floor all level including camage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge (a)Tor steel.	841.2	Kg	75.4	₹63,426.48
5	Brick work with common bunt clay building bricks F.P.S (Non modular) bricks of class designation 7.50 (seven point five) in super structure above plinth level upto all floor all levels in all shapes and sizes in cement mortar 1:6 (One cement Six sand) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge	24.74	Cum	6,164	₹1,52,497.36
6	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base lies of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Chargee:	13.2	Rmt	451.9	₹5,965.08

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing form work with steel plates 3.15mm thick welded with angle ron in frame30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs, and removal of the same for insitu-reinforced concrete & plain concrete workinCentering and shuttering including strutting, proping etc, and removal for the same complete including carnage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge

1.1

Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 metre in depth in all heights from floor

5.58

Sqm

387.15

₹2,160.3

1.2

Flat surfaces such as soffits of suspended floors, roofs, landings and the like

17.05

Sqm

468.3

₹7,984.52

1.3

Stair cases (except spiral stair cases) excluding but including preparing of the surface and finishing of the nosing upto all floor level complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge

12.3

Sqm

444.4

₹5,466.12

2Providing and laying in position specified grade of reiforceed cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement-work upto floor two level complete and as per HP. PWD specifications of 1990 volume-1. including carriage of all, labour, equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges

2.1

1:1.50:3 (one cement isto one point five course sand isto three graded stone aggregate 20.00 mm (twenty milimeter) nominal size (Lintels, beams girders bressumers and cantilevers upto floor two level) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge

2.9

Cum

7,835.75

₹22,723.68

Providing hoisting and fixing above plinth level upto floor five level Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level but excluding the cost of required centering shuttering with 1:1.5:3(one cement, one point five sand, three graded stone aggregate twenty milimetre nominal size (including carmage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer in-Charge

1.72

Cum

7,950.75

₹13,675.29

Steel reinforcement for reinforced cement concrete work including cutting/bending. binding and placing in position complete including cost of binding wire upto floor all level including camage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge (a)Tor steel.

841.2

75.4

₹63,426.48

Brick work with common bunt clay building bricks F.P.S (Non modular) bricks of class designation 7.50 (seven point five) in super structure above plinth level upto all floor all levels in all shapes and sizes in cement mortar 1:6 (One cement Six sand) complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Charge

24.74

Cum

6,164

₹1,52,497.36

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base lies of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in-Chargee:

13.2

Rmt

451.9

₹5,965.08