PROVN OF CERTAIN MINOR WORKS UNDER AGE B/R-II AT MIL STN YOL

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any kind of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

PCC 1:2:4 type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Glazed ceramic coloured tiles in vertical surface 450mm X 300mm X 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in Skirting, Dados, etc., laid over and including 10mm thick rendering in CM 1:4 on fair & other faces of brickwork, concrete or stone surfaces work complete all as specified and as directed.

GI frame work anodised snap grid frame work of size of size 605 mm X 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/ instructions), cutting holes for electrical fittings fixed on and including aluminium tee of size 25mmX25mmX1.50 mm as main runner, aluminium tee of size 25mmX25mmX1.25 mm as cross runner and aluminium angle of size 25mmX25mmX1.25mm at the perimeter suspended from soffit at approx 900 mm centre to centre with hangers 6 mm dia galvanised (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanised iron flat 40 mm X 3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including necessary scaffolding complete all as specified and directed.

6 mm thick non asbestos fibre cement building boards of size 600x600mm (ED board) as in ceiling fixed or laid/ inserted to timber/ GI/ aluminium frame work fixed with nails, all as specified including dismantling of old wall/ceiling boards. complete all as specified and as directed.

Metal Beam Crash Barrier, Type-A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810) complete all as specified and directed by Engineer in Charge.

Supplying and fixing 3M Engineer grade Prismatice Reflective Sheeting series 3430 (non-metalized) microprismatic retroreflective sheeting (for commercial signs and non critical control signs) of size 50mm width complete all as specified and directed by Engineer-in-Charge. Note:- (i) Colour Coding/ different colour combination shall be finalised by GE. (ii) No additional cost will be charged by Contractor as different colour combination used over erected crash barrier.