Supply, Delivery, Erection and Commissioning (SITC) of 1500 Cum/Hr, 980 RPM, 18 Mtrs head of 150 HP Vertical Turbine Pump Set with accessories at head Water Works in RMC.(Under General funds or Pushkaram funds)

Supply and transportation of 150HP Vertical turbine with Following specifications: A) Pump: 1. Dicharge: 1500 m³/Hr 2. Head: 18m 3. Pump efficiency: 81.06% 4. Pump speed: 980 RPM 5. Density: 1.0005G 6. Make: Kirloskar/WPIL/Groundfos B) Delivery Flange Details: 1. Flange drilling Standard: IS 1538 part IV (FF) 2. Flange OD: 615mm 3. Flange ID: 450mm 4. Flange PCD: 565mm 5. No.of holes: 20Nos 6. Hole Size: 28.00mm 7. Column Pipes materials: M.S Iron 8. Shaft material: SS410

Testing of above VT Pumps and Tools Kit charges complete under supervision of company engineers as per the site condition.

Supply, delivery, erection and commissioning of 110KW 980RPM 6 Pole 415V LT Vertical Mounting Induction Motor suitable above pump. Driver Details (Motor): 1. Make: CGL/ABB/ Kirloskar 2. Speed: 980Rpm 3. Frame Size: 315M 4. Voltage: 415± 10% volts 5. Frequency: 50± 5% HZ 6. Type of Motor: Squirrel cage Induction Motor 7. Mounting Type: Vertical

Supply, Installation, testing and commissioning of PN 10 450 mm dia 4 stainless steel (SS) expansion bellow for pump delivery side including cost and conveyance to all materials etc., complete

Supply, Installation, testing and commissioning of 100 mm dia, Glycerin Filled 0-5Kg/Sqcm Round dial suction side pressure guage with operating cock and nippals, sockets, weldings complete with all accessories as per the site conditions.

Supply, laying, glanding and termination of 6RX1CX90Sqmm XLPE PVC insulated copper conductor armoured LT cable as per the site conditions from VFD panel to Motor terminal boxes duly laid in the cables trays/trenches and cost including dressing & termination, glandings complete with labour charges.

Supply, delivery, erection and commissioning of 150HP VT Pump VFD with Star/Delta Motor control Supply, delivery, erection and commissioning of 150HP VT Pump VFD with Star/Delta Motor control panel consisting of 1. 150HP 50HZ 415V VFD Drive with choke-1 1No 2. 150HP Star/Delta starter-1No 3. 250A 50KA 415V MCCB Incomer 4. 150HP sultable OLR Kit with relay. 5. R,Y,B and ON, OFF, Trip Indication lamps 6. VFD drive indication lamps(ON, OFF & Trip) 7. Terminal connectors. 8. MFM Meter 9. Digital ammeter and Voltmeter with Selector switch 10.Suitable Aluminium Bus bar. 11. Run Hr Meter 12.Suitable cubicle with MS base frame. 13.Panel lamp, heater and exhaust fan. 14. Bottom cable entry provision and gland plate. 15. 1ph control with MCB control for both VFD and Start/delta starter. 16. UV protection relay. 17. Star/Delta contactors with timer-1set panel consisting of

Supply, laying glanding and termination of 3CX1205qmm XLPE PVC insulated armoured Copper conductor LT cable as per the site conditions from VFD panel I/C to Main PCC O/G duly laid in the cables trays/Trenches and cost including dressing & termination, glandings complete with labour charges.

Charges towards dismantling of existing old pump sets, removing of old base frames, cables, panels, delivery pipes, valves, trays, shifting to departmental stores and other civil works complete with labour charges as per the site condition.

Supply, Installation, testing and commissioning of motor operated 5 ΤΟΝ 10 capacity Electrical operated (EOT) crane assembly with lifting SS hook and SS chain complete.

Erection of above VT Pump sets with all tools and labour charges complete under supervision of company engineers as per the site condition.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as B5:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/B5:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2024-2025, SL No.30 For 450mm PN 1.6 with Bypass

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (15 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08054 For 450mm PN 1.6

Lowering, Keeping in position and fixing C.I. sluice valves (with cap/with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet as per IS -1161 and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges cost of welding rods power charges etc. complete as per the instructions of the Departmental Authorities.

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colour

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supply and delivery of Single Core, 50 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex, Havells, Fortunearrt, V-gaurd MAT-05468

Supply and delivery of 3 core, 16 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H flat copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex, Havells, Fortunearrt, V-gaurd MAT-02799

Supply and transportation of 150HP Vertical turbine with Following specifications: A) Pump: 1. Dicharge: 1500 m³/Hr 2. Head: 18m 3. Pump efficiency: 81.06% 4. Pump speed: 980 RPM 5. Density: 1.0005G 6. Make: Kirloskar/WPIL/Groundfos B) Delivery Flange Details: 1. Flange drilling Standard: IS 1538 part IV (FF) 2. Flange OD: 615mm 3. Flange ID: 450mm 4. Flange PCD: 565mm 5. No.of holes: 20Nos 6. Hole Size: 28.00mm 7. Column Pipes materials: M.S Iron 8. Shaft material: SS410

Testing of above VT Pumps and Tools Kit charges complete under supervision of company engineers as per the site condition.

Supply, delivery, erection and commissioning of 110KW 980RPM 6 Pole 415V LT Vertical Mounting Induction Motor suitable above pump. Driver Details (Motor): 1. Make: CGL/ABB/ Kirloskar 2. Speed: 980Rpm 3. Frame Size: 315M 4. Voltage: 415± 10% volts 5. Frequency: 50± 5% HZ 6. Type of Motor: Squirrel cage Induction Motor 7. Mounting Type: Vertical

Supply, Installation, testing and commissioning of PN 10 450 mm dia 4 stainless steel (SS) expansion bellow for pump delivery side including cost and conveyance to all materials etc., complete

Supply, Installation, testing and commissioning of 100 mm dia, Glycerin Filled 0-5Kg/Sqcm Round dial suction side pressure guage with operating cock and nippals, sockets, weldings complete with all accessories as per the site conditions.

Supply, laying, glanding and termination of 6RX1CX90Sqmm XLPE PVC insulated copper conductor armoured LT cable as per the site conditions from VFD panel to Motor terminal boxes duly laid in the cables trays/trenches and cost including dressing & termination, glandings complete with labour charges.

Supply, delivery, erection and commissioning of 150HP VT Pump VFD with Star/Delta Motor control Supply, delivery, erection and commissioning of 150HP VT Pump VFD with Star/Delta Motor control panel consisting of 1. 150HP 50HZ 415V VFD Drive with choke-1 1No 2. 150HP Star/Delta starter-1No 3. 250A 50KA 415V MCCB Incomer 4. 150HP sultable OLR Kit with relay. 5. R,Y,B and ON, OFF, Trip Indication lamps 6. VFD drive indication lamps(ON, OFF & Trip) 7. Terminal connectors. 8. MFM Meter 9. Digital ammeter and Voltmeter with Selector switch 10.Suitable Aluminium Bus bar. 11. Run Hr Meter 12.Suitable cubicle with MS base frame. 13.Panel lamp, heater and exhaust fan. 14. Bottom cable entry provision and gland plate. 15. 1ph control with MCB control for both VFD and Start/delta starter. 16. UV protection relay. 17. Star/Delta contactors with timer-1set panel consisting of

Supply, laying glanding and termination of 3CX1205qmm XLPE PVC insulated armoured Copper conductor LT cable as per the site conditions from VFD panel I/C to Main PCC O/G duly laid in the cables trays/Trenches and cost including dressing & termination, glandings complete with labour charges.

Charges towards dismantling of existing old pump sets, removing of old base frames, cables, panels, delivery pipes, valves, trays, shifting to departmental stores and other civil works complete with labour charges as per the site condition.

Supply, Installation, testing and commissioning of motor operated 5 ΤΟΝ 10 capacity Electrical operated (EOT) crane assembly with lifting SS hook and SS chain complete.

Erection of above VT Pump sets with all tools and labour charges complete under supervision of company engineers as per the site condition.

Supply and delivery of "Resilient Seated Soft Sealing" gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 of Equivalent as per IS 1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-0 ring protection system on the Shaft and seals of NBR. The Valves should be Vaccume tight and 100% leak proof with face to face dimensions as B5:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/B5:5163 Type A Flange drilling as per IS-1538 including transportation. SSR 2024-2025, SL No.30 For 450mm PN 1.6 with Bypass

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS-5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring, Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze (15 318); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.450mm PN 1.6 MAT-08054 For 450mm PN 1.6

Lowering, Keeping in position and fixing C.I. sluice valves (with cap/with hand wheel & Reflex valves excluding cost of Bolts, Nuts, rubber insertion, sluice valve and tail pieces. PHE-CISV-15.

Jointing C.I. pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead upto 500 Mtrs and testing to required pressure complete

Manufacture, supply, delivery and fixing of required M.S. fabricated Pipe and specials (Bends, Tees and Reducers etc.) using required size M.S. sheet as per IS -1161 and providing redoxide paint and anticorrosion paint two coats including cost of all materials, conveyance to work spot fixing in position and all labour charges fabrication charges cost of welding rods power charges etc. complete as per the instructions of the Departmental Authorities.

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colour

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supply and delivery of Single Core, 50 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex, Havells, Fortunearrt, V-gaurd MAT-05468

Supply and delivery of 3 core, 16 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H flat copper cable for voltage up to 1100V as per IS 694/1990. Make:Polycab, Finolex, Havells, Fortunearrt, V-gaurd MAT-02799

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%