Construction of Veterinary Dispensary Building at Jabbal Ka Bag, Tehsil Nahan, Sirmaur (HP)

Amount

Excavation in foundation, trenches etc. in earth work in all heights & depths in all kinds of soil including struated soil comprising of pick work, jumper work, blasting work ( both soft & hard rock ) & shall be excavated with chiselling & wedging out rock ( where blasting is prohibited ) and their interemediate classification of soil including dewatering wherever required setting out to required lines, level as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the HPPWD specifiction of 1990 volume-I and sorting out useful & unuseful materials & stacking the same in all leads and lifts and transportation of the unuseful materials for disposing at dumping sites ( to be arranged by the contractor )through all modes of transportation including head load,animal load or mechanical means along with its levelling fine dressing & all labour machineries materials, tools equipements and safety measures & incidentals necessary to complete the work by mechanized means and labour ( If required ). All useful materials such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used and removed as per the direction of Engineer-in-Charge .Any loss to the public and private properly during the course of execution and dispoal of serviceable and un-serviceable materials shall be the aboulute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in earth work in drains and channels in all heights & depth in all kinds of soils, including struated soil comprising of pick work, jumper work and blasting work ( both soft & hard rock ) & wedging out of rock,( where blasting is prohibited ) and their interemediate classification of soil including dewatering wherever required, setting out to required lines, grades, side slopes, trimming bottoms and levels as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the HP.PWD., specification of and sorting out useful unuseful materials and stacking the same in all leads and lifts and levelling and disposing of surplus excavated earth in acquired width of road or on approved dumping sites which will be arrange by the contractor at his own level and dumping charges if levied will be born by the contractor through all modes of transportation and used/ removed as direction of the Engineer-in-Charge including head load,animal load or mechanical means along with its levelling fine dressing & all labour,machineries,materials tools equipments and safety measures and incidentals necessary to complete the work by mechanized means & labour ( if any required ).All useful materials, such as stones, shingles, aggregate and slates shall be sorted out and stacked along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per direction of Engineer-in-Charge. Any loss to the public and private properly during the course of execution and dispoal of serviceable and un-serviceable materials shall be the aboulute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Filling in plinth with sand under floors including watering ramming consolidating & dressing complete as per HP.PWD., specification 1990 volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing form work with steel plates 3.15mm ( Three decimal one five milimeter ) thick welded with angle iron in frames 30x30x5mm ( Thirty into thirty into five milimeter ) ,so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens & ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00 mtrs ( four meters ) & removal of the same for in-situ reinforced concrete and plain concrete work as per HP.PWD., specification 1990 volume-I ( One )including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge in :-

Foundation, footing, basis of columns etc. and mass concrete.

Flat surface such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm ( Two hundredmilimeter) in thickness

Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pillasters, buttresses, plinth & string courses & the like.

Beams, cantilevers,girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1.00 mtrs ( One meter )in depth in all heights from floor level.

Edges of slabs and breaks in floors & walls under 20cm ( twenty centimeter ) wide in all floor level.

Providing & laying cement concrete 1:6:12 ( One cement : six approved sand : twelve graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work in foundation & plinth as per HPPWD. Specification 1990 volume-I ( One ) including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete 1:4:8 ( One cement : four approved sand : eight graded crushed stone aggregate 40mm ( forty milimeter ) nominal size ) and curing complete excluding cost of form work in foundation & plinth as per HPPWD. Specification 1990 volume-I ( One ) including carriage of all labour equipments and materials to various location through all leads,lifts and other incidental charges complete as per the entire satisfaction of the Engineer-in-Charge.

Providing & laying cement concrete work mechnically mixed & vibrator 1: 1.5 : 3 ( One cement : One & half approved sand : three graded crushed stone aggregate 20mm ( twenty milimeter ) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation, footing, basis of columns etc. and mass concrete including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume-I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Suspended floors,roofs,landings & shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor levels including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Wall ( any thickness but not less than 0.10 metres ( Zero decimale one zero meter ) attached pillasters buttresses,plinth and string courses etc. from top of foundation level upto all floor level including carriage of materials within all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

Providing tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete upto all floor level as per HPPWD specification 1990 Volume-I ( One )including carriage of all labour equipment & materials to various location through all leads, lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying damp proof course 38 mm ( thirty eight milimeter ) thick with cement concrete 1 : 2 : 4 ( One cement : two sand : four graded stone aggregate 12.5mm ( twelve point five milimeter ) nominal size ) & curing complete as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

Applying a coat of hot bitumen ( mexphalt 80/100 ( eight/hundred ) or equivalent ) using 1.70 Kg ( One point seven zero kilogramme ) per square metres on damp proof course after cleaning the surface with a piece of cloth lightly soaked with keresene oil as per entire satisfaction of the Engineer-in-Charge as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge

Brick work second class using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( one cement : six approved sand )as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Brick work second class using common burnt clay building bricks in Super structure above plinth level upto all floor level in cement mortar 1:6 ( one cement : six approved sand )as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Half brick work second class using common burnt clay building bricks in foundation & plinth in cement mortar 1:4 ( one cement : four approved sand ) as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Half brick work second class using common burnt clay building bricks in Super structure above plinth level upto all floor level in cement mortar 1:4 ( one cement : four approved sand ) as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Random rubble masry/polygonal rubble masonry ( Uncoursed/ brought to courses ) with hard stone of approved quality in foundation & plinth including levelling up with cement concrete 1 : 6 : 12 ( One cement : six sand : twelve graded stone aggregate 20 mm ( twenty milimeter ) nominal size ) at plinth level in cement mortar 1 : 6 ( One cement : six sand ) as per HP.PWD., specification 1990 Volume- I ( One ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Boulder filling dry hand packedunder flooring & behind retaining wall as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 100mm ( one hundred milimetre )bright finished brass floor door stopper with rubber cushion etc. to suit shutters thickness complete as per HPPWD specification 1990 volume-I ( One )including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing bright finished hard drawn hooks & eyes 150mm size ( One hundred fifty milimetre size ) as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing factory made flush door 35mm ( Thirty five milimetre ) thick commercial board i.e. Non-decorative phenol bonded termite resistant & water proof core of block board construction with full frame of first class hard wood & well match commerical three ply veneer with vertical grain or cross band and face vaneer on both face of flush door I.S.I. marked IS No. 2202 of century ply board ( I ) Ltd. or its equivalent including black enamelled M.S. butt hinges as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing 30mm ( thirty milimetre ) thick second class deodar wood work for wire gauge shutters using galvanised mild steel wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm ( Zero decimal fifty six milimetre ) for doors,windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel sliding door bolts with nuts and screws etc. complete 250 x 16mm ( Two hundred fifty into sixteen milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel tower bolts ( Barrel type ) with necessary screws etc. complete 200 x 10mm ( Two hundred fifty into ten milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing oxidized mild steel tower bolts ( Barrel type ) with necessary screws etc. complete 100 x 10mm ( One hundred into ten milimeter ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing oxidized Mild steel handles with the necessary screws etc. complete 125mm ( One hundred twenty five milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing oxidized Mild steel handles with the necessary screws etc. complete 75mm ( Seventy five milimetre ) size as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing mild steel plain grills of required pattern in steel window frame etc. with mild steel flats 20 x 5mm ( twenty into five milimetre ) and 8 x 8 mm ( eight into eight milimetre ) Mild steel square bars in combination with or by screws distance between bars should not be more than 150 mm centre to centre total grills unit should be fixed to windows frames as per HPPWD specification 1990 volume-I ( One ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Automatic Vibro hydraulically compressed 300x300x25mm ( three hundred into three hundred into twenty five milimetre )polished terrazo tiles ISI marked No. 1237 ( Number one thousand two hundred thirty seven ) in 70% ( Seventy percent ) white, 30% ( thirty precent )grey cement ratio. The Ratio of chips shall be 55 % ( Fifty five precent )white & 15 % ( fifteen precent ) of each maroon,yellow & maroon, yellow & dark shade laid over a bed of 25mm( twenty five milimetre) average thickness of cement mortar 1:6 ( one cement : six approved sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing & polishing complete. The size of Chips shall be 0, B, 2 B of NTC or its equivelent in all floor level as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Automatic Vibro hydraulically compressed 300x300x25mm ( three hundred into three hundred into twenty five milimetre )polished terrazo tiles ISI marked No. 1237 ( Number one thousand two hundred thirty seven ) in 70% ( Seventy percent ) white, 30% ( thirty precent )grey cement ratio. The Ratio of chips shall be 55 % ( Fifty five precent )white & 15 % ( fifteen precent ) of each maroon,yellow & maroon, yellow & dark shade laid over a bed of 25mm( twenty five milimetre ) average thickness of cement mortar 1:6 ( one cement : six approved sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing & polishing complete in skirting or dedo. The size of Chips shall be 0, B, 2 B of NTC or its equivelent in all floor level as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Extra for providing & fixing glass strips in joints of terrazzo floor 40mm ( forty milimetre ) wide & 4mm ( four milimetre ) thick as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipments & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

40mm ( forty milimeter ) thick cement concrete flooring 1:2:4 ( One cement : two approved sand : four graded stone aggregte 20mm( twenty milimetre ) nominal size ) laid in one layer finished with a floating coat of neat cement in all floor level as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entiresatisfaction of Engineer-in-Charge.

15mm ( fifteen milimetre )thick cement plaster skirting ( upto 30 cm.( thirty centimetre ) height ) with cement mortar 1:3 ( One cement : three approved sand ) finished with a floating coat of neat cement including rounding of junction with floor as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

Providing & laying spartic ceremic tiles 5.5 mm ( Five point five milimetre ) thick ( 300 x 300 mm size ) ( Three hundred milimetre into three hundred milimetre ) of Nitco, Kajaria / Orient etc. or equilevent of approved shade in flooring treads of steps laid on a bed of 12 mm ( Twelve milimetre ) thick cement mortar 1 : 3 ( one cement : three sand ) finished with flush pointing in white cement as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipments and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

First class White glazed tiles 6mm ( six milimetre ) thick 30 x 45cm ( thirty into forty five milimetre ) in skirting,risers & dedo of Nitco, Kajaria / Orient etc. or equilevent of approved shade 12 mm ( tweleve milimeter ) thick cement mortar 1:3 ( One cement : three approved sand ) & jointed with cement slurry finished with flush pointing in white cement as per HP.PWD.,specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing on wall face PVC ( D-Plast ) rain water pipes of working pressure not less than 4.5 Kg ( Four decimal five kilogram ) per square meter including filling the joints with approved adhesive complete 100mm ( One hundred milimeter ) dia pipes as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 100mm ( One hundred milimetre ) dia as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC Collars ISI marked approved design with steel screws and rawal plugs etc. complete 100mm ( One hundred milimetre ) dia as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing and fixing PVC clamps ISI marked approved design with steel screws and rawal plugs etc. complete 100mm (One hundred milimetre ) dia as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & fixing 0.60mm ( Zero point six zero milimeter ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 ( twenty ) microns over 5 ( Five ) microns primer coating to back coat of ployster of 5 ( five ) microns over 5 microns primer coating including fixing with prepainted iron-J or L hooks bolts and nuts 6mm dia metre with prepainted limpet & rubber washers complete with all accessories as required as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & fixing ridge or hips 60cm ( Sixty centimetre ) overall with 0.60mm ( Zero point six zero milimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coating Plus back coat of ployster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron-J or L hooks bolts & nuts 6mm ( Six milimetre ) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & fixing valley 60cm ( Sixty centimetre ) overall with 0.60mm ( Zero point six zero milimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 ( Five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron-J or L hooks bolts & nuts 6mm ( Six milimetre ) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & fixing 15cm ( fifteen centimeter ) wide 45 cm ( fourty five centimeter ) over semicircular plain galvanised iron sheet gutter with iron brackets 40 x 3 mm ( forty into three milimeter ) size bolts & nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.63 mm ( zero point six three milimeter ) thick sheet as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Providing & fixing M.S. B.P. sheet 1.66mm to 2mm ( One point one six milimetre to two milimetre ) thick in eaves board/facia/ soffits/ ceiling including cutting fixing & welding to steel roof mambers and applying a coat of red lead primer complete as per the instruction of the Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately ) as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Steel work in built up section, trusses & framed work, including cutting,hoisting & fixing in position and applying a priming coat of red lead paint

in trusses and trussed purlins in building as per HPPWD., specification 1990 volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing angle iron door, windows,clerestory windows frame manufactured from steel iron section of 50 x 50 x 6 mm ( Fifty into fifty into six milimetre ) ,thickness including hinges jamb,lock jamb, beed & if required angle thrashold of mild steel angle 50 x25mm ( fifty into twenty five milimetre ) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( Two decimal five milimetre ) thick with provision of locking arrangement & shock absorber as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Mild steel Channels in doors,windows frames,manufactured from Mild steel channels section of size 75 x 40mm ( Seventy five into forty milimetre ),M.S. flat 75x4mm ( Seventy five into four milimetre ) combination as per design drawing including hinges, Jambs,beed & if required angle thrashold of mild steel angles,lugs with split end tails to each jamb including steel nuts hinges 2.5mm thick with provision of locking arrangement & shock observers & specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing steel glazed doors,windows & ventilators of standard rolled steel Z section with horizontial & vertical Sashbar of angle iron 25x15x3mm ( Twenty five into fifteen into three milimeter ) T-section 25x25x3mm ( Twenty five into twenty five into three milimeter ) in fixed and openable shutters as per standard Architectural drawing,jointed mitred & welded with M.S. Channel framed or with fixing clips or with bolts & nuts as required & iron fitting, including providing & fixing of glass pans with glazing clips & special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Steel windows Fixed steel windows as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Steel windows Side hung windows as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Top Hung ventilators as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing sal wood work in frame of flase ceiling partitions etc. sawn & put up in section as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing partical board ceiling of approved quality with butt jointing & nails ( frame work & cover fillets to be paid separately ) Gypsum board 12.5 mm ( Twelve point five milimeter ) thick as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.

Painting two coats ( excluding priming coat ) on new steel & other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust & other foreign matters with other then white as per HPPWD specification 1990 Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying one coat of Birla / J.K.white wall care putty/Kemocare wall smoothner putty of Kamdhenu or its equivalent over plastered surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papering smooth to give final matter finish to surface complete as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Applying one coat of Acrylic primer/ Kamdhenu primer or its equivelent of superior quality on new concrete/ plastered surfaces after & including preparing the surface by thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matter sand papering smooth the surface complete as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Finishing wall with weather proof exterior grade premium emulsion of Kamdhenu paints/Apex Ultima or its equivelent of approved shade on undecorated wall surface ( two coats ) to give an even shade & final finish after thoroughly cleaning the surface to remove all dirt, dust & other foreign matter etc. including sand papering smooth in all external plastered surfaces as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm ( fifteen milimetre ) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

15mm (fifteen milimetre)cement plaster in single coat on fair side of brick/ concrete/ stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in (eighty milimetre) grith finished even and smooth in cement mortar 1:4(One cement:four approved sand) as per HP.PWD.,specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Distempering two coats with oil bound distemper ( Tractor Synthetic washable distemper or Asian/Narolac Paints or its equivelent ) of approved shade and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even and sand papering smooth as per HP.PWD.,specification 1990 volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing under layer for plinth protection of 75mm ( Seventy five milimetre ) thick (Unconsolidated) bed of dry/stone aggregate 40mm( forty milimetre ) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing plinth protection 50mm ( fifty milimetre ) thick in cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20mm nominal size ) as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Constructing course rubble hammer dressed " U " shape open surface drain with side wall 15x22 cm(fifteen into twenty two centimetre) in cement mortar 1:6 ( one cement : six approved sand ) & inside plastering with cement plaster 1 : 3( One cement : three approved sand ) including earth work & laying 10cm ( ten centimetre ) cement concrete in 1:5:10 ( One cement : five approved sand : ten graded stone aggregate of 40mm( forty milimetre) nominal size ) & 7.5cm ( Seven decimal seven milimeter )cement concrete 1:2:4 ( one cement : two approved sand : four graded stone aggregate of 20mm ( twenty milimetre )nominal size ) & finished with floating coat of neat cement complete as per standard design as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & laying in trenches, galvanised mild steel tubes ( Medium grade ) , tube fitting ( earth work in trenches to be measured & paid for separately )

15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes ( Medium grade ) tube fitting and clamps including making good the wall, ceiling & floor

15 mm ( Fifteen milimetre ) nominal bore as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC water storage tank of ISI 12701 marked,G.I. inlet & outlet connection,15mm nominal bore ball valve & mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level

500 ( Five hundred ) litre net capacity tank as per HP.PWD., Specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Construction chamber 300mm x 300mm x 500mm ( Three hundred milimetreinto three hundred milimetre into five hundred milimetre ) inside size for stop cock with C.I. surface box 100mm x 100mm x 75mm ( one hundred milimetre into one hundred milimetre into seventy five milimetre )( inside ) with hinged cover fixed in cement concrete slab 1:2:4 ( one cement : two approved sand:four graded crushed stone aggregate 20mm nominal size ) 75mm thick foundation concrete 1:5:10 (one cement:five approved sand:ten graded crushed stone aggregate 40mm ( forty milimetre ) nominal size ) & inside plastering with cement mortar 1:3 ( One cement:three approved sand)finished with a floating coat of neat cement including curing complete, with 100mm ( one hundred milimeter )thick walls of brick masonry in cement mortar 1:5 ( One cement : five approved sand ) as per HPPWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing and fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete. :-

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC door bend with oval access door insertion rubber washers 3mm ( three milimeter ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete.

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

110mm (One hundred ten milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC clamps ISI marked including fixing with approved adhesive etc. complete

150mm (One hundred fifty milimetre ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PVC reducer ISI marked including jointing with approved ahesive etc. complete

150mm x 110mm (One hundred fifty milimetre into one hundred ten milimeter ) dia as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting & making good the walls & floors :-

75 mm dia (Seventy five milimetre) as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

100 mm dia ( One hundred milimetre) as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Vitreous China wash down water closet ( European type W.C. pan ) with intergal " P " or " S " trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( One cement : one sand ) ( Seat & cover to be measured & paid for separately ) Anglo Indian European No. 2004 of white shade of Hindware or its equilevent W.C. Pan as per HP.PWD., specification Volume -I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

Providing & fixing 10 ltr. ( Ten litre ) net capacity first quality white shade low level flushing cistern ( with duel flushing cisern ) item No. 502 ISI marked No.7231 of prayag sanitary Hardware or its equvelent with a pair of C.I. or mild steel brackets complete with fitting such as lead valveness syphon 15mm( fifteen milimeter ) nominal size PVC brass valve with polythene float,with push button,couplings for connections with inlet,outlet & over flow pipes, 40mm ( forty milimeter ) dia C.P. flush bend including cutting holes in walls & making good the same & connecting the flush bend with cistern and closet ( Overflow pipe to be measured & paid for separately )as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing plastic seat ( solid/Hollow type ) & cover for wash down water closet with C.P. brass hinges & rubber buffers Solid Type white plastic seat & cover as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing PTMT Jet Spray of approved quality & colour with one metre tube as per HP.PWD., specification Volume -I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.

Providing & fixing 15 mm ( fifteen milimetre ) mixer for kitchen Sink with casted Swininging Spout at top of approved quality as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing in position brass mosquito proof coupling for over flow pipe of 25mm ( twenty five milimetre ) nominal dia ( Over flow pipe to be measured and paid for separatel ) as per HP.PWD., specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

Providing & fixing Vitreous China wash basin with single hole for pillar tap with C.I. Or M.S. brackets painted white including cutting holes & making good the same but excluding fitting flat back white shade No. 102012 of clear size 580 x 400mm ( five hundred eighty into four hundred milimetre ) with pedestal of Hindware or its equivelent as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing Vitreous China Pedestal for wash basin complete recessed at the back for reception of pipes & fittings as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing Laboratory Sink with Cast iron or Mild steel brackets painted white including cutting holes in walls & making good the same but excluding fitting, vitreous China 600mm x 450mm x 250 mm size ( six hundred milimeter into four hundred fifty milimeter into two hundred fifty milimeter ) as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

P/F C.P. brass Chain 50mm long & rubber plug of following size for sink or wash basin 32mm ( thirty two milimetre ) dia as per HP.PWD., specification 1990 Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing M.I. union for wash basin or sink 32mm ( Thirty two milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass waste for wash basin or sink 32mm ( Thirty two milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass" S "trap for wash basin or sink 32mm(Thirty two milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 100mm (One hundred milimetre)sand cast iron grating for gully, floor or Nahni trap as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing 600mm x 450mm ( six hundred milimetre into for hundred fifty milimetre ) bevelled edge mirrior of superior glass mounted on 6mm (six milimeter ) thick A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws & washers as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing brass bib tap ( superior or heavy type ) 15mm dia ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass pillar tap with capstan head 15mm dia ( fifteen milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. stop cock 15mm dia ( fifteen milimetre ) dia as as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing C.P. brass angle valve 15mm ( fifteen milimetre ) without nuts & pipe ( fifteen milimetre ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix ( One cement : two approved sand : four graded stone aggregate 20mm ( twenty milimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four approved sand : eight graded stone aggregate 40mm nominal size ) inside plastering 15mm ( fifteen milimetre ) thick with cement mortar 1:3 ( one cement : three approved sand )finished with a floating coat of neat cement & making channels in concrete 1:2:4 mix ( One cement : two approved sand : four graded stone aggregate 20mm ( twenty milimetre )nominal size ) finished smooth complete including curing & testing inside size 800 x 800 x 500mm ( eight hundred into eight hundred into five hundred milimetre ) deep including C.I. cover with frame ( Light duty single seal pattern ) 455mm x 610 mm ( four hundred fifty five milimetre into six hundred ten milimetre ) internal dimensions total weight of cover and frame to be not less than 38 Kg ( thirty eight kilogram )(Weight of cover 23Kg( twenty three kilogram ) and weight of frame 15 Kg ( fifteen kilogram ) with 200mm ( two hundred milimeter ) thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement : three approved sand ) as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & laying brick aggregate (One size) 50mm ( fifty milimetre )nominal size ) for soak pit as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing & fixing PVC Cowl for ventilating pipes for rain water pipe or soil waste pipe 110mm ( One hundred ten milimetre ) dia PVC Cowl of 2.7mm ( Two point seven milimetre ) thick as per HP.PWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.

narpat singh