Renovation of Social home Sector 18 including space structure Electrical Installations, under the work of Various Civil, Electrical, Water Supply

B Total Amount i/c GST (DSR + Non-DSR):- 45,626,291

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

1 MR-50 Providing ,fixing and installation of 6 ft height fiber glass work Dabadashi statue for clay

modeling with ,plasterparis mold and finished with mansion police, fiber comocal for

GPR, mat axiliter, catalyst, frinchallk powder, brush, plastic primer, duco primer, duco Each 2.00 126864.75 253,730

color, latch finish and artistic including all material, labour, tools & tackls etc. complete as

per direction of Engineer-in-charge

2 MR-51 Providing fiber glass mural art design finish and artistic including all material, labour,

tools & tackls etc. complete as per direction of Engineer-in-charge

3 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out

the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50

2.8.1 All kinds of soil Cum 640.00 302.22 193,419

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum 200.00 267.55 53,511

ramming and watering, lead up to 50 m and lift upto 1.5 m.

5 MR-1 Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

6 1.0 CARRIAGE OF MATERIALS

1.1 By Mechanical Transport including loading,unloading and stacking

7 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885

) in cement mortar 1:4 (1 cement : 4 Coarse sand) in foundation and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Cum 55.00 6878.45 378,315

8 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in

superstructure above plinth level up to floor five level in :

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 100.00 8629.70 862,970

9 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

10 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

11 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding

the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

12 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

5.2.1 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources).

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

13 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 1125.00 324.45 365,003

14 5.9.3 Suspended floors, roofs, landings, balconies and access

15 5.9.4 Shelves (Cast in situ) Sqm 2.00 807.62 1,615

16 5.9.5 Lintels, beams, plinth beams, girders, bressumers and

17 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 16.00 847.33 13,557

18 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level./ Steel reinforcement for R.C.C. work

including straightening, cutting, bending, placing in position and binding all complete

above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 3500.00 94.45 330,584

19 MR-61 Providing and laying in position Screed Concrete 1:2:4 mix (1cement: 2 sand: 4 stone

aggregate 10mm nominal size) at all levels.

20 MR-4 Providing, fabrication, supply and installation of space frame structure type

double layer, frame joint type MERO of grid size 2Mx2M, pipes of MS ERW

(steel grade Yst 240mpa, i.e yield stress 240N/sqmm equivalalent to IS:

1161/1239, circular hallow section with coaxial cones welded at both ends.

Nodes with solid spherical with facing & holes drilled and tapped. Using high

tensil bolts of grade 8.8, MS quality pins. Purlins of RHS/SSH /C-section, steel Sqm 700.00 11997.02 8,397,913

columns of MS gr. E-250 as per IS 2026 including design and drawing. Painting

with one coat of red oxide zinc chromate primer and two coats of synthetic

enamal paint and covered with roof sheeting 2mm thick solid polycarbonate

sheet including all materials, labour, tools, tackles etc complet as per the

direction of Engineer-in-charge

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

21 15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including

stacking within 50 metres lead :

15.13.1 Of area 3 sq. metres and below Each 40.00 124.64 4,986

22 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

23 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

24 9.57 Providing and fixing ISI marked IS : 1341 oxidised M.S. pressed butt hinges with

necessary screws etc. complete. (copper oxidized as per IS: 1378)

25 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating

not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

26 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed Each 5.00 902.17 4,511

adjustment with necessary accessories and screws etc. complete.

27 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 10.00 65.58 656

28 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall

thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners

and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the

vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 RM 10.00 430.12 4,301

gauge, EPDM rubber gasket weather seal to be provided through out the frame. The

door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per

manufacturer’s specification and direction of Engineer in-Charge.

29 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out

of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15

mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved

make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C'

channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20

mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95

mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45

degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of

which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 )

thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,

paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed

to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on

inner side, and joined together with solvent cement adhesive. An An additional 5 mm

thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using

PVC solvent adhesive etc. complete as per direction of Engineer-in-charge,

manufacturer's specification & drawing.

9.120.1 30 mm thick plain PVC door shutters Sqm 4.00 2586.62 10,346

30 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622,

of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm 8.00 1204.02 9,632

sqm including grouting the joints with white cement and matching pigments etc.,

31 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement Sqm 180.00 1120.42 201,676

: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

32 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet

for placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

33 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades in for outdoor floors such as

footpath, court yard, multi modals location etc., laid on 20mm thick base of cement Sqm 115.00 1811.09 208,275

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as per direction of

Engineer-in-Charge.

34 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block

of M -30 grade made by block making machine with strong vibratory compaction, of

approved size, design & shape, laid in required colour and pattern over and including Sqm 25.00 1001.95 25,049

50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge.

35 11.56 Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge

11.56.2 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 17.00 4118.20 70,009

36 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

37 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster

including disposal of rubbish to the dumping ground within 50 metres lead.

38 13.4 12 mm cement plaster of mix :

39 13.6 20 mm cement plaster of mix :

13.6.2 20 mm cement plaster of mix : Sqm 150.00 422.85 63,428

40 13.16 6 mm cement plaster of mix :

41 13.18 Neat cement punning. Sqm 25.00 71.43 1,786

42 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :

13.33.2 Raised and cut pointing Sqm 100.00 611.33 61,133

43 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by

scrapping, sand papering and preparing the surface smooth including necessary repairs Sqm 1000.00 21.97 21,967

to scratches etc. complete.

44 13.88 Removing white or colour wash by scrapping and sand papering and preparing the

surface smooth including necessary repairs to scratches etc. complete

45 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture

on wall surface :

13.43.1 Water thinnable cement primer Sqm 1720.00 67.90 116,793

46 13.80 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 1400.00 130.48 182,679

surface even and smooth complete.

47 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound

) content less than 50 grams/ litre, of approved brand and manufacture, including

applying additional coats wherever required, to achieve even shade and colour.

48 13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50

gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt

resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming

coat of exterior primer applied @ 0.90 litre/10 sqm.

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

49 12.53 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight

calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel

sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and of size 24x38 mm made from

0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size

24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between

main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross

‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be

inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm,

resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of

size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl

plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval

and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture

in the grid, including, cutting/ making opening for services like diffusers, grills, light Sqm 450.00 1810.77 814,848

fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling

with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with

galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to

centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted

with polyster baked paint, for all heights, as per specifications, drawings and as directed

by Engineer-in-Charge. sqm 1718.70 Note :- Only calcium silicate false ceiling area will

be measured from wall to wall. No deduction shall be made for exposed frames/opening

(cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC

value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part

IV, 100% humidity resistance and also having thermal conductivity

50 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated

thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-

7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.

Sheet should have protective guard film of 25 microns minimum to avoid scratches

during transportation and should be supplied in single length upto 12 metre or as desired

by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of

size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or

curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to

size and shape wherever required

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05

%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel

grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18

microns using self drilling/ self tapping screws complete :

51 12:51:01 Ridges plain (500 - 600mm)

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c

fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

Charge. Concealed work, including cutting chases and making good the walls etc.

52 18.8.1 15 mm nominal dia Pipes RM 15.00 464.78 6,972

53 18.8.2 20 mm nominal dia Pipes RM 15.00 541.27 8,119

54 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete as per direction of Engineer in Charge

18.9.3 25 mm nominal dia Pipes RM 15.00 390.51 5,858

55 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush

pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, ncluding cutting and making good the walls and floors

wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot

56 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C.

pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe,

with manually controlled device (handle lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 1.00 5837.37 5,837

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

57 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm

C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.

brass pillar tap

58 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Each 2.00 1486.75 2,973

brass screws and washers complete

59 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

60 18.15 Providing and fixing brass bib cock of approved quality :

18.15.1 15 mm nominal bore Each 3.00 320.13 960

61 18.16 Providing and fixing brass stop cock of approved quality :

18.16.1 15 mm nominal bore Each 3.00 320.13 960

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with

plastic floats complete :

62 18.18.1 15 mm nominal bore Each 2.00 367.54 735

63 18.18.2 20 mm nominal bore Each 2.00 418.74 837

64 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 RM 10.00 1135.12 11,351

65 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating

with or without vent arm complete, including cost of cutting and making good the walls

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 6.00 1690.03 10,140

66 17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3

mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 4.00 629.61 2,518

67 17.39 Providing and fixing plain bend of required degree.

17.39.1.2 Sand cast iron S&S as per IS - 3989 Each 8.00 463.31 3,706

68 17.43 Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 2.00 770.58 1,541

69 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

15.7.4 In cement mortar Cum 15.00 1789.44 26,842

70 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 85.00 1306.01 111,011

71 15.28 Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the

material within 50 metres lead of:

72 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all

gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and kg 2000.00 4.90 9,798

stacking within 50 metres lead.

73 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed

work, including cutting, hoisting, fixing in position and applying a priming coat of Kg 1300.00 117.95 153,332

approved steel primer all complete.

74 MR-3 Fabricating and erecting structural steel like joist/ channel/ angle in trusses/ posts/ rafter/

purlins in true to line and level including cutting required length. drilling holes and welding

etc complete as per the direction of the Engr-In-charge. (Excluding cost of structural Kg 200.00 40.04 8,007

75 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 350.00 491.28 171,948

76 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 300.00 595.06 178,517

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

77 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or

graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in

aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel

screws etc. complete as per architectural drawings and directions of engineer in-

21.2.2 Pre-laminated particle board with decorative lamination on both sides sqm 100.00 1002.00 100,200

78 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 50.00 1396.56 69,828

79 13.87 White washing with lime to give an even shade :

13.87.1 Old work (two or more coats) Sqm 100.00 20.02 2,002

80 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)

& 900 N (Edge), minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel butt hinges of required size with necessary full body threaded

star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:

stainless steel butt hinges and necessary S.S screws shall be paid separately)

81 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of

virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent

cement and screwed with full body threaded star headed SS screws having minimum

frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N

(Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2

and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S

hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth

and width of profile shall be acceptable. Variation in profile dimensions on plus side shall

be acceptable but no extra payment on this account shall be made.

82 14.91 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five

layer 3 mm thick water proofing membrane, black finished reinforced with non-woven

polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40

litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and

viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using

Butane Torch and sealing all joints etc, and preparing the surface complete. The vital

physical and chemical parameters of the membrane shall be as under : Joint strength in

longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in

longitudinal and transverse direction as 300/ 250N. Softening point of membrane not

less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

83 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of kg 825.00 645.05 532,166

waist slab with suitable arrangement as per approval of Engineer-in charge, (for

payment purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

84 8.32 Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all levels etc. including:

(a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to make it

watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of approved shades made out of 4mm thick

aluminium composite panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1

and polymer (Service) coating on face # 2 as specified using stainless steel screws,

nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with

serrations and serrated washers to arrest the wind load movement, fasteners, SS 316

Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi- Sqm 10.00 4713.89 47,139

metallic contacts all complete required to perform as per specification and drawing The

item includes cost of all material & labour component, the cost of all mock ups at site,

cost of all samples of the individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with aluminium composite panel

cladding till the handing over of the building for occupation. Base frame work for ACP

cladding is payable under the relevant aluminium item.s The Contractor shall provide

curtain wall with aluminium composite panel cladding, having all the performance

characteristics all complete , as per the Architectural drawings, as per item description,

as specified, as per the approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the actual area on the external face

of the curtain wall with Aluminum Composite Panel Cladding (including width of groove)

shall be measured in sqm. up to two decimal places.

85 MR providing, fabrication, supply and installation of space frame structure type double layer,

frame joint type MERO of grid size 2Mx2M, pipes of MS ERW (steel grade Yst

240mpa, i.e yield stress 240N/sqmm equivalalent to IS: 1161/1239, circular hallow

section with coaxial cones welded at both ends. Nodes with solid spherical with facing &

holes drilled and tapped. Using high tensil bolts of grade 8.8, MS quality pins. Purlins of

RHS/SSH /C-section, steel columns of MS gr. E-250 as per IS 2026 including design and Sqm 1000.00 10328.16 10,328,161

drawing. Painting with one coat of red oxide zinc chromate primer and two coats of

synthetic enamal paint and covered with roof sheeting 2mm thick solid polycarbonate

sheet including all materials, labour, tools, tackles etc complet as per the direction of

Engineer-in-charge

86 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out

the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50

2.8.1 All kinds of soil Cum 500.00 302.22 151,108

87 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum 50.00 267.55 13,378

ramming and watering, lead up to 50 m and lift upto 1.5 m.

88 MR-1 Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

89 1.1 By Mechanical Transport including loading,unloading and stacking

90 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

91 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

92 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding

the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

93 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 350.00 324.45 113,557

94 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level./ Steel reinforcement for R.C.C. work

including straightening, cutting, bending, placing in position and binding all complete

above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 4000.00 94.45 377,811

95 13.4 12 mm cement plaster of mix :

BILL OF QUANTITY

“Renovation of Social home, Sector-18 including space structure & Electrical Installations, under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

96 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block

of M -30 grade made by block making machine with strong vibratory compaction, of

approved size, design & shape, laid in required colour and pattern over and including Sqm 1000.00 1001.95 1,001,946

50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge.

Total Amount (Civil) (A):- 13,825,338 19,630,910

Total Amount (Civil) (A):- 13,825,338 19,630,910