Interior designing and decoration of proposed CMD annex in New Administrative Building, SECL HQ

Amount

Civil Furniture & interior works:- CMD TABLE WITH SIDE TABLE -Main Table size 3300MM x 1150MM x 750MM & Side table size 2400MM x 600MM x 680MM P&F CMD TABLE IN 19MM THK BWR/BWP PLY FRAME WORK INCLUDING SIDE TABLE AND DRAWERS KEYBOARDS BORDERS FOOT REST IN 12MM WITH 2MM THICK EDGE BANDING. THE TABLE SHALL HAVE ONE 3 DRAWER UNIT ONE TEA TRAY & ONE PENCIL TRAY . THE SIDE TABLE SHALLE BE COVERED WITH SLIDING SHUTTERS ALONG WITH CPU TROLLEY PROVISION. CMD TABLE WILL BE OF 750MM HEIGHT & SIDE TABLE WILL BE OF 675MM HEIGHT FINISHED WITH 3MM THICK VEENER . TABLE TOP & SIDE TABLE TOP SHALL BE FINISHED IN 6MM THICK ACRYLIC SOLID SURFACE (CORIAN)ALL OTHER EXPOSED SURFACES WILL BE IN 3MM VEENER. THE COMLETE ACCESORIES USED SHALL BE HETTICH OR HAFFELE OR EBCO TELESCOPIC CHANNELS, BRASS HANDLES, STAINLESS STEEL HANDLES COMPLETE AS PER DIRECTIVES AND DESIGN APPROVED (COST OF VENEER 150/- PSFT CONSIDERED). THE BELOW SURFACE SHOULD BE COVERED WITH 0.8MM LAMINATE. 3Coats of melamine polish should be done on veneer surface.

CMD MEETING TABLE - SIZE 2400MM X 1200MM X 750MM COMPLETE TABLE IN 19MM BWR / BWP COMMERCIAL PLY HAVING TABLE TOP IN 6MM ACRYLIC SOLID SURFACE FINISH WITH EDGE MOULDINGS. THE BOTTOM OF TABLE SHALL BE COVERED WITH DESIGNER 2 TO 4MM BATONS ALL ROUND AS PER DESIGN APPROVED WITH POP BOX FOR ELECRICAL & DATA CONNECTIONS ON TABLE TOP. THE TABLE SHALL HAVE TRAP DOOR FOR ELECTRICAL MAINTENANCE PURPOSE. THE VENEER COST CONSIDERED IS 150 PER SQ FT. THE TABLE MOULDING SHOULDE BE DONE 2INCHES BELOW TABLE CURVE. REST SPACE SHOULD BE COVERED WITH 0.8MM LAMINATE BELOW THE TABLE TOP SURFACE. 3 Coats of melamine polish should be done on veneer surface.

BACK STORAGE SIZE - 3000MM X 450MM DEPTH X 700MM HT THE BACK SYORAGE COMPLETE BODY WILL BE MADE IN 19MM THICK BWR. BWP PLY. THE INSIDE WILL BE OF APPOROVED 0.8MM LAMINATE. THE TABLE TOP WILL BE MADE IN 6MM SOLID ACRYLIC (CORIAN) OF APPROVED SHADE. THE OUTER SIDE WILL BE FINISHED IN 4MM VENEER OF APPOVED SHADE. 3 COATS OF MELAMINE FINISH POLISHING SHOULD BE DONE on veneer surface.

DISPLAY UNIT SIZE -3600MM L X 2100MM H X 450MM D Display Unit:Providing and fixing Display Unit made out of 18 mm with laminte body,Doors with 18 mm ply & vineer,Shelfs are of 18 mm ply & 6MM acrylic solid surface shall be finished. Provision of lights for enhancing look including necessary fasteners & fixtures to complete the job as per design & instruction of Engineer Incharge. The veneer rate considered is 150 rs per SqFt.

Technical, Personel Secretary, Secretary to TS table: Providing and fixing free standing Table made out of 25 mm thick top with ply & laminate., 25 mm thick gable end with ply & laminate,Modestee with 18 mm ply & laminate. plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge Table size. 1800(L)X750(W)X750(H) mm Side Table:Providing and fixing free standing Table made out of 25 mm thick top with ply & laminate. 18 mm thick gable end with ply & laminate,Modestee with 18 mm ply & laminate. plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge Side Table size.

Personel Secretary - Back Storage: Providing and fixing Back storeage made out of 25 mm thick top border with ply & Laminate , Body & door with 18 mm ply with Lmainte,& shelf & drawer with BWP or BWP plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge BackSIde Storage size. 1200X450X750(H) mm

Personel Secretary Room - File storage Unit: Providing and fixing FIle storage Unit made out of 18 mm ply & with laminte body,Doors with 18 mm ply & laminate,Shelfs are of BWP or BWR plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge unit size. 4200(L)X450(D)X2400(H) mm

Technical Secretary Room - File storage Unit: Providing and fixing FIle storage Unit made out of 18 mm ply & with laminte body,Doors with 18 mm ply & laminate,Shelfs are of BWP or BWR plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge unit size. 2400(L)X450(D)X2400(H) mm

Personel Secretary Room - File storage Unit: Providing and fixing FIle storage Unit made out of 18 mm ply & with laminte body,Doors with 18 mm ply & laminate,Shelfs are of BWP or BWR plywood as per IS:303 including PVC edge band, necessary fasteners & fixtures to complete the job as per instruction of Engineer Incharge unit size. 2400(L)X450(D)X2400(H) mm(80mm partition 2700mm height)

Glass wall partition at garden side CMD cabin : Providing & fixing ceiling Ht 2.47 mtr height Glass partition with 10 mm toughned clear glass fitted with top & bottom section,instruction of Engineer Incharge. The glass will be frosted in the middle portion. Water flowing effect will be giveb in the middle portion to enhace the beauty and interior. The glass will be of 8ft in height and will be in portions supported on d section framing. Complete renovation will be strictly as per approved design.

Wall Paneling CMD Cabin - Inside walls will be provided with 8`ft x 2`ft CHARCOAL SHEETS on pillars and in the middle section for interior look as per design with approved shade

12 MM THK BWR / BWP PLY FIXING - P&F 12mm thk approved brand plywood on aluminium frame work frame work for partitions door paneling drawers false ceiling etc in shape including scaffolding carting cleaning the site etc as per site requiremnt.

Fixing of 4MM thick Veneer - P & F 4mm thk veneer of approved shade and brand costing Rs.110/- PSFT in partitions, tables, drawers, false ceiling, doors, book shelf, etc with 3 coats of melamine finish polish as per approved design and site requirement etc complete

6MM thk LACQUERED GLASS - P&F 6mm thk lacquered glass of approved shade and brand as per design on plywood partition paneling ceiling storage etc along with 3m adhesive tape or fixed the glass with adhesive along with necesarry cutouts holes for locks handles studs etc complete as per design or site requirement

6mm thk SOLID ACRYLIC SURFACE fixing to partition paneling tables drawers shelves on plywood of approved shade and brand as per design or site requirement complete including fabrication moulding scaffolding edge mouldings etc complete

12mm Toughened glass door with laser finish - P&F 12mm thick toughened glass for full height partition in single piece or in 3 to 4 pieces as per site requiremnt with diamong cut & edge polish with brush finished stainless steel runner for top & bottom including required cutouts,holes for lock handles "v" cut grooves etc along with adhesive screws etc complete as per design & site requiremnts

P&F 32mm Thick solid flush door shutters made out of 12mm thk apporoved shade and brand with veneer finish with 3 coats of melamine finish polish

Floor spring (90 Kg) - P&F approved make floor spring fixed with top & bottom pivots & plate fixed as per design or site requirement with stainless steel finish plate etc complete

Door closure - P&F approved brand door closure open type as per design amd site requirement Door closure Concealed - P&F approved brand door closure close type as per design amd site requirement Door stopper - P&F door stopper of approved brand as per design Mortoice Lock - P&F approved brand brush finished stainless steel mortoise lock for door shutters fixed as per design Mortoice pin cylinder - P&F approved brand brush finished stainless steel mortoise pin cylinder for door shutters fixed as per design Door handle for VIP Chamber - Stainless steel door handle of approved brand with its accsesorries as per design & site requiremnt etc complete Door hinges - P&F door hinges 6x3 with stainless steel pin & bearing for doors shutters as per design complete etc Stainless steel Handles for doors as per site requiremnt complete etc for toilet doors, shutters, drawers, partition doors etc as per site requirement complete

False ceiling - Gypsum board false ceiling of approved design as per site requiremnt having metallic grid which consists of GI perimeter channels of size 27mm x0.5mm thk having one flange of 20mm & another of 30m, GI intermidiate channel of size 45mmx0.9mm thk with two flanges of size 25mmx10mm x0.5mm each at 1200mm C/c along with cleat & GI expansion fastners. Covering - Fixed with 10mm gypsumboard tometalframes in taper / square edges of gypsum board shall be finish with filling the joints with fibre tape in one level surface including grooves cutouts for electrical lights points smoke detectors AC drills including scaffolding etc complete as per design & site requirement complete

Veneer Ceiling - P& F false ceiling made out of 19" plywood framework 1'6" C/c cover with 12mm thk ply at one side finish with 3mm thk approved shade veneer & design with 12mm wide INLAY work & 1"x1", 2"x1" moulding & 2"x2" suspension, scaffolding etc. All exposed surface shallbe finished with approved design with melamine polish in 2 coats etc complete

Printed ceiling - Fabric , Profile including installation. Stretch Mterial - Continent of Origin - Aisa Treatment - UV Printed thickness of Membrane - 0.18mm Weight - 250 -300 gsm +/- 2%. The width of membranes (without seams) stretched - 500cm unstretched , 514 cm stretched. Hairline seam afterwards. % of light transmission with EN 13501-1. Installation system - PVC harpoon welded with high frequency om the perimeter of the menbrane according to shape and size. Aluminium profiles size : - 20 ft x 20 ft = 252 SqFT. Plywood framing in 12mm nedds to be done with minimum 150mm depth and coated with double layer of enamel white paint.Also white silicone sealant is applied on the joints of the plywood framing (box type) to restrict insects to enter inside

Lighting - 6500K - 24V OSRAM rigid Block LED 6500K 16 degree best viewing angle with PMMA lens ROHS certifed power consumption : 4W per rigid block LED SMPS - ICEIL driver with LED Life Span - 20000Hrs or 5 Yrs

Vitrified stain free flooring (1200mm x 1200mm ) P&F 1200mm x1200mm x8mm thk floor tile ofpremium quality of approved shade fixed with cement mortor 1:4 about 50mm to 75mm thk including 4mm thk float cement filling of joints with neat matching shade cement slurry etc complete as per site requirent Vitrified stain free flooring (800mm x 800mm ) P&F 800mm x800mm x8mm thk floor tile ofpremium quality of approved shade fixed with cement mortor 1:4 about 50mm to 75mm thk including 4mm thk float cement filling of joints with neat matching shade cement slurry etc complete as per site requirent Laminate wooden flooring - P& F of laminated wooden flooring of approved shade and brand of 8mm Thk of size 1500 / 1800 x 100 / 150 mm x 8mm thk panels with 2mm thk PVC underlay shall be laid on existing floor with complete edge mouldings & end strips at junction T grooves etc.

Plastic emulsion paint with putty and 2 coats etc complete

Zebra Blinds - P&F motorised zebra blinds of approved shade & brand fixed with aluminium powder coated head rail along with stainless steel drive rod etc complet as per design

Toilet :- MODERNLIFE EDGE TALL LAV FAUCET WO DRAIN - 2578IN-4ND-AF SKU COMPLIMENTART ANGLE VALVE - 80158IN-9-AF SKU ESSENTIAL RECTANGLE MIRROR - 26052 - BGL - SKU ML EDGE VESSEL HG1 - 21226IN - SKU GRID DRAIN - 45432IN - AF - SKU BOTTLE TRAP 350MM - 75823IN - AF - SKU MODERNLIFE EDGE TOILET W / UF SEAT HG1 - 27902IN - HG1 SKU INSTAFIT+ NXT GEN - PNEU IN WALL TANK - 26353IN - P -NA SKU LYNK PNEUMATIC FACEPLATE FRENCH GOLD - 75290IN - P -AF COMPLIMENTARY HEALTH FAUCET W HOSE - 12927IN - AF SKU LIQUID SOAP DISPENSER - 10712IN - AF SKU PATIO TOUCHLESS URINAL WATERSAVING - 16321IN - SS - 0 SKU ACCENT TOILET TISSUE HOLDER - 25346IN - AF SKU

Total impact of GST for the purpose of CTC

M/s. V P Jain