Turnkey Contract for Supply, Laying, Installation, Testing and Commissioning of 11kV underground cable with erection of TC/DP/Pole if required (pole and fabrication materials will be supplied by DGVCL and jointing kits & end termination in bidder’s scope) along with dismantling work of existing network (TCDP/Pole/Line) at various locations in DGVCL area with site survey including Surface Utility Engineering (Survey work of verification of Underground utilities using Ground Penetrating Radar (GPR) and Electronic Pipe locator (EPL) under Overhead to Underground Scheme/ or other scheme.

Name of work:- Tender for Trunkey Contract for Supply, Laying, Installation, Testing and Commissioning of 11kV underground cable with erection of

TC/DP/Pole if required (pole and fabrication materials will be supplied by DGVCL and jointing kits & end termination in bidders scope) along with

dismantling work of existing network (TCDP/Pole/Line) at various locations in DGVCL area with site survey including Surface Utility Engineering

(Survey work of verification of Underground utilities using Ground Penetrating Radar (GPR) and Electronic Pipe locator (EPL) under Overhead to

Underground Scheme / or other scheme. Item Rates including GST.

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

Supply of 11KV 185 mm2 XLPE Alluminium, 3 Core Cable as per DGVCL

Technical Specification

Supply of 11KV 240 mm2 XLPE Alluminium, 3 Core Cable as per DGVCL

Technical Specification

Labour charge for excavation of cable trench of 400mm width x 1200mm

depth, in any type of soil for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be considered i.e. half trench

length is to be considered

Labour charge for excavation of cable trench of 600mm width x 1200mm

depth, in any type of soil for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be considered i.e. half trench

length is to be considered

Labour charge for excavation of cable trench of 400mm width x 1500mm

depth, in any type of soil for laying of cable of size up to 240 mm2 (For

additional cable 200 mm additional width shall be considered i.e. half trench

leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2

& preparation of sand layer 100mm thick, in the cable trench & covering the

cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC half

round muffs and providing and fixing of 4inch width yellow colour polyethylene

6 9925000004 tape with printing"CAUTION ELECTRIC CABLE BELOW' at 0.75 m depth Meter

from ground surface after laying cable in trench. This will provide indication

that electric cable is passing underground so as to protect cable from

mechanical injuries, refilling the same, as per Instruction of Engineer in

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

Labour charge for horizontal drilling using Auger machine without damage to

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4,

110mm 0.D. 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd

revision) and BIS certification and laying of 11KV/22KV XLPE cable of size up

7 9925000005 to 240 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). The Meter

detail map obtained from HDD machine and excel sheet hard and soft copy)

indicating the respective depth and distance from adjacent landmark for each

segment for HDD is must require to be submitted. HDD to be carried out at

depth 1.5 mtrs to 2.0 mtrs as per site conditions and as er instruction of EIC.

Labour charge for horizontal drilling manually without damage to surface road

at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-4, 110mm O.D.

8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and

BIS certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2

8 9925000006 size, as per Site Condition (excluding cost of pipe). The detail map and excel Meter

sheet (hard and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment of cable to be submitted. Drilling to be

carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as

per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,110mm O.D. , 8.5 mm thickness H.D.P.E.

9 9925000007 pipe confirms to IS 4984 and BIS certification for laying of underground 11KV/ Meter

22KV XLPE cable up to 240 mm 2 size.

Labour work for RCC concreting on disputed location and repairing of

10 9925000008 damage portion of road crossing for the work carried out for roads crossing CMT

Providing & fixing concrete stone route marker of 300 mm width x 150 mm

thick x 650 mm height embedded in earth at least 300 mm below & 350 mm

above ground level respectively at distance approx. 50 meters along the

length of cable. The RCC concreting (1:2:4)(all necessary materials will be in

bidder's scope) of route marker is to be carried out 300 mm width x 150 mm

11 9925000009 thick x 300 mm below ground level as per instruction of EIC. The route No

marker should be with name of company with approved yellow colour-

DGVCL. The distance from marker to cable and cable depth with feeder

name etc., marked with arrow sign is to be painted on it. The route marker is

to be fixed at location near to any fixed permanent location (not necessary to

fix exact on top of cable) as per instruction of EIC.

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV

cable including excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting of necessary fabrication for

11KV/22 KV cable including excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable

connection arrangement along with fitting of necessary fabrication for 11KV

cable including excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable

connection arrangement along with fitting of necessary fabrication for

11KV/22 KV cable including excavation of pit & refilling of earth as per

instruction of EIC. (Exclusive of concreting& muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm

2 on DP Structure with fixing of 02 Nos polymer cleats on top and middle part.

16 9925000014 perJob

Polymer cleats, nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class 4, 110mm O.D. 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984 and BIS certification on the erected DP

structure for the mechanical protection of cable by inserting the cable inside

HDPE pipe. The HDPE pipe shall be erected in such a way that 300mm shall

17 9925000015 perJob

be below the ground level and the rest 2700 mm shall be supported on the

DP Structure with 01 No Polymer cleat. All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with

pit to be filled with salt & coke and construction of chamber as per DGVCL

Drg. No. dg /100 for DP and cable. The earthing pit should be joined with

18 9925000016 cable by G.I. strip of size 25x3 mm which should be covered with PVC rigid No

pipe. All material GI pipe, Coke Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV

3C x 185 mm size XLPE cable as per DGVCL technical specification

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C

x 185 mm size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x

185 mm size XLPE cableas per DGVCL technical specification.

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm

deep joint pits for installation of 11kV / 22kV Straight through joints as per

22 9925000023 instruction of engineer-in-charge & covering the cable with 150 mm dia No

(Outer), thickness 25 mm, 1.0 meter long RCC half round muffs & refilling

same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable

after removal of semi conducting layer and applying of PVC heat shrinkable

antitracking core insulating tubing (1.1KV), on both end terminal using

Aluminium long barrel heavy duty up to 240 sq mm lugs, Aluminium bus

23 9925000024 connector. Taping with PGclamp for bus conductor as per drawing and as per No

instruction of EIC. The Allurninium lugs and PG clamp shall be covered with

11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will be in scope of

DGVCL while all other materials will be in bidder's scope.

Testing of cable at various points and commissioning the feeder as per

24 9925000025 instruction of engineer-in-charge.Test result shall be submitted by contractor No

Preparation and submission of 6 (six) copies, of complete layout drawings

25 9925000026 with GIS mapping as per actual cable routing showing road crossing, HDPE Set

pipe sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm

aluminium sheet size 750x300 mm (2.5 x 1 ft) rectangle, as per design,

pretreated with phosphate process and acid etching coated with one coat of

epoxy primer and two coats of best quality paints, reflectorized with Hi

Intensity retro — reflective sheeting as per the latest and frame fabricated

26 9925000027 from suitable size iron angle. The Sign Board is to be fixed on the base No

prepared from channel and bracing angles which is grouted by means of

cement concreting of 1:2:4 for size of 300 mm dia x 800 mm height (500 mm

to be grouted in ground). The details to be displayed on sign board will be

given by InchargeEngineer. (a) Hi intensity Micro prismatic Grade

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

Providing and fixing of Sign Board (Danger Board) on Distribution

Transformer Centers Made out of 2mm aluminium sheet size 300x300mm

(1X1 ft) as per design, pre treated with phosphate process and acid etching

coated with one coat of epoxy primer and two coats of best quality paints,

27 9925000028 reflectorized with Hi-Intensity retroreflective sheeting as per the latest and No

frame fabricated from suitable size iron angle. The Sign Board (Danger Board

is to be fixed at the location as per instruction of In-charge Engineer. (a) Hi

intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from

mm aluminium sheet along with 1.0 mm dia aluminium binding wire for fixing

of aluminium tag near end termination joint at DP structure for identifying the

cable. The details of feeder i.e. 11 / 22 KV with feeder name should be

punched on the tag by letter punch of size 16 mm as per instruction of In-

charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for up to 11kV

29 9925000030 3C x 240 mm2 size XLPE cable as per DGVCL technical specification No

Supply & fixing of heat shrinkable type end terminations (indoor) for up to

30 9925000032 11kV 3C x 240 mm 2 size XLPE cable as per DGVCL technical specification No

Supply & fixing of heat shrinkable straight through joint for up to 11kV 3C x

31 9925000034 240 mm 2 size XLPE cables as per DGVCL technical specification. No

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS AND NUMBERING COMPLETE WITH COST PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF PSC POLES OF 8METER 200 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OFCROSS

ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS

ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL

POLE, FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING

ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD LINES I.E

INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTICLIMBING DEVICES

35 9926000004 DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF NO.

STEEL POLES, FABRICATED MATERIALS USED ON THE POLES

ANDNUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGERBOARDS,INSULATORS ETC.COMPLETE

36 9926000005 AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES NO.

AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

EARTHING. (WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL

POLE INCLUDING EXCAVATION OF PITS &REFILLING OF EARTH,

FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARDS, INSULATORS ETC.COMPLETE &PAINTING

37 9926000006 POLES,FABRICATED MATERIAL SUSED ON THE POLES AND NO.

NUMBERING WITH COST OF PAINTSAS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ANDEARTHING. (WITHOUT AB SWITCH)

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH, HGFUSES OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES,

38 9926000007 DANGER BOARDS, INSULATORS,DO FUSES ETC. COMPLETE AND NO.

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING OF ERECTION OF GUY SET

AND EARTHING. (WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF

CHANNEL, SUPPORTING ANGLES, CLAMPS, ANTICLIMBING DEVICES

39 9926000008 DANGER BOARDS, INSULATORS, ETC. COMPLETE AND PAINTING OF NO.

POLES FABRICATED MATERIALS USED ON THE POLES

ANDNUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUTEXCLUDING ERECTION OF GUY SET AND

EARTHING. (WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH,FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF

40 9926000009 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS NO.

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES

INCLUDINGEXCAVATION OF PITS & REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE, FIXINGOF CHANNELS

41 9926000010 SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, NO.

ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY

SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH STAY

42 9926000011 CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY NO.

INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT

43 9926000012 SAND METAL (1:2:4)AND WATER ETC. AS PER STANDARD CMT

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT

44 9926000013 ETC. BUT WITHOUT COST OF Gl WIRE AS PER STANDARD NO.

SPECIFICATION(20kg salt+20kg coal)

ERECTION OF Gl PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF

COAL SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE Gl WIRE

AS PER STANDARDSPECIFICATION. (20k solt+20k coal)

STRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG

46 9926000016 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF

INSULATORS BINDING JUMPERING ETC.

STRINGING OF Gl WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. ONECONDP

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA

FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST

EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF

POLE,GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE

APPROVAL OF SUPDT.ENGINEER.

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

ERECTION OF SINGLE POLE STRUCTURESWITH, HG

FUSES,TRANSFORMERS,LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 8 METERS 200 KG PSC POLE INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

49 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES NO.

DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC.COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF SINGLÉ POLE STRUCTURES WITH HG

FUSES,TRANSFORMERS,LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS

AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM

STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

50 9926000027 ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES NO.

DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC.COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 1O METER 270 KG INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS

ARMS, TOP FIITING CLAMPS ANTICLIMBING DEVICES, INSULATORS

51 9926000028 ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED NO.

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METER 270 KG PSC

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-

CLIMBING DEVICES DANGERBOARDS,INSULATORS

52 9926000029 ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON NO.

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARDSPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

ANDEARTHING. WITHOUT AB SWITCH

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB

SWITCH,HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

53 9926000032 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI- NO.

CLIMBING DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

54 9926000033 FABRICATION AT STORE &STACKING OF POLE SAFELY ON ROAD SIDE No.

OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

55 9926000034 FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON

ROADSIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE & STACKING OFPOLE SAFELY ON ROAD SIDE ORCREDITING

TO DEPARTMENTAL STORE

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD

MATERIAL TO STORE

RATE (Rs.) Amount (Rs.) with

No. Item Code Description Unit

DISMENTALING TRANSFORMER CENTER ON IO MTR,270KG PSC POLE

WITHOUT TRANSFORMER WITH CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMERCENTER ON

1OMTR,270KG PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

60 9926000044 FABRICATION AT STORE AND STACKINGOF POLE SAFELY ON ROAD Nos

SIDE ORCREDITING TO DEPARTMENTAL STORE

61 -- Dismantling of conductor and crediting the old material to store. KM

62 -- Loading and Unloading of TC and Transportation Charges LS

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able

boot (HT Side 11KV, LT Side 1.1KV) including 11 KV insulating taps and

L.T.(1.1 KV) insulating taps ,Busbar, Tapping from Bus Bar (11 KV XLPE

cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing of jumper and providing & fixing of

Heat Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level

63 9925000046 KV) in H.T. jumper , Clamping arrangement of cable support frame on both Nos.

side of existing Over Head type Distribution Transformer to utilize in Under

Ground cable network as per drawing & as per instruction of Engineer

incharge. All live parts i.e. PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with fixinng of 11 KV HT insulating tapes.

(11 KV XLPE cable will be in scope of DGVCL while all other materials will be

in bidder's scope ) .

Total Amount (with GST) (Indicative)

Total Amount (with GST) (Indicative)

In words : - Rupees Fourty Crores Only

Specific Note for the Bidder:-

**If under ground cable work with excavation of trench method and horizontal drilling not possible than cable laying work will be carried out as per site

situation with DGVCL prevaling practice.

2 PSC/RSJ poles /Guysets,Earthing with its assessories shall be provided from Local sub division or Division Store of DGVCL and bidder have to collect

3 L1 Bidder will be decided on total amount for the evaluation of price Bid including all type of taxes (GST).

3 L1 Bidder will be decided on total amount for the evaluation of price Bid including all type of taxes (GST).

4 Bidder needs to quote composite rate i.e. CGST + SGST + CESS or CGST + IGST + CESS as the case may be.

5 Rate quoted should be inclusive of Packing / Forwarding, transportation, insurance, installation and with applicable warrantyincluding all taxes.

6 Any changes in Govt. Taxes / Duties shall be applicable as on at the actual time of invoice.

7 All materials supplied by sucessfull bidder shall be supplied from Approved vender of GUVNL and its subsidary Company.