Renovation of Road of Rusena Mr from km 3.000 to 4.290 Left Bank (Lot 11)

Cleaning thik jungle and thorny bushes without uprooting

Providing, Laying, spreading and compacting stone aggregrates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the characteristics of coarse aggregate watering and compacting to the required density

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30 kg per sqm in the prepared bituminous/granular surface cleaned with mechanical broom

Providing, laying and rolling of open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearring course on a previously prepared base, including mixing in a suitable plant, laying with paver and rolling with a smooth wheeled roller 8-10 tone capacity, finished to required lavel and grades complete as per MorTh Technical specification Clause 510 including all Cost of labour material and T&P etc. required for proper completion of work

Providing and laying seal coat "C"Type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall

Earth work in excavation including lead upto 30m & lift upto 1.5m, excluding mechanical compaction but including manual compaction and dressing to profile

P/L of hot applied thermoplastic compound 2.5 thic i/c Reflectorising glass beads @250 gms/sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35-2015. The finished surface to be level, uniform and free from streaks and holes work as per direction of Eng-in-charge