REPAIR MAINT OF DG SETS OF DIFFERENT CAPACITIES AT MH AMBALA AREA UNDER GE UTILITY AMBALA CANTT

Amount

Comprehensive maint and servicing of DG SET complete including draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel , drain out engine oil from the sump , flushing the sump thoroughly and filling the starting batteries with elecrtrolite to maintain the required specific gravity of the batteries, applying the petroleum jelly on battery terminal poles and charging up to required AH, cleaning the entire DG set including all accessories as prescribed by Engr-in charge and checking of voltage ,frequency, amps , fuel, oil , coolent level and exhuast leakage etc. Tightening all the bolts & nuts to the required torque ..etc and testing as directed by Engineer In Charge and recording the test result complete for the Make - Cummins/Kirloskar, installed at MH power houses, MH Dental,AMN Depot Naraingarh,TW No-23,signal centre,Raina auditorium, butchary etc. Notes:- (a) Contractor will carry out comprehensive maint and servicing as listed in respective items through qualified technical staff only. (b) Contractor will give gaurantee for one year from the certified date of completion for the repair work carried out. Any fault accured during gaurantee period shall be rectified by the contractor with out any extra cost to the department .(c) Cost of spare parts replaced shall be measured and paid separately.(d )Engine oil shall be measured and paid separately-

400 KVA DG set

200 to 280 KVA DG set

100 to 125 KVA DG set

50 to 82.5 KVA DG set

31.25 to40 KVA DG set

Draining out water from the radiator, Dismantling opening and taking out radiator from the foundation and transporting to civil workshop for repair including Maintenance and Servicing of Radiator and cleanning the radiator thoroughly with cleaning agent to improve the efficiency of the radiator, welding / soldering / brazing of radiator for the undere mention DG sets complete all as directed. Notes:- (a) Contractor will carry out comrehensive maint and servicing listed in respective items through qualified tecnical staff only. (b) Contractor will gaurantee for one year from the certified date of completion for the repair work carried out.(c)Any fault occured during gaurantee period shall be rectfied by the contractor with out any extra costb to the department.(d) Coolent for radiator shall be measured and paid separately-

400 KVA DG set

200KVA to 280KVA DG sets

100KVA to 125KVA DG sets

50 KVA to 82.5KVA DG sets

31.25 to 40 KVA DG set

7.5 KVA DG sets

Dismantling opening and taking down unserviceable fuel injection pump and transportation to civil wksp for repair ,maintenance and servicing of fuel injection pump (FIP) including calibaration of Fuel injection pump, replacement of injectors nozzles etc if any found defective, and refitting the same in position for smooth and efficient functioning of FIP for the under mentioned DG sets all as directed by Engr-in-Charge. Note : - (a) Repairs will be carried out from authorised workshop of manufacturer of DG set. (b) Contractor will give gaurantee for one year from the date of completion of the repair work carried out. Any fault occured during gaurantee period shall be rectified by the contractor with out any extra cost to the department.

200KVA to 280KVA DG sets

100KVA to 125KVA DG sets

50 KVA to 82.5KVA DG sets

31.25 to 40 KVA DG set

Maintenance and servicing of self starter 12/24 Volt of DG set installed at various installations and servicing/overhauling including replacing of worn out parts like solenoid switch, bearing, carbon brush, rewinding the starter motor winding wth suitale size super enamelled copper wire including warnishing complete etc. and refitting the self starter in position for smooth functioning of DG sets and testing complete in all respect all as directed by Eng-in-Charge. Note:-(a) Contractor will carry out comprehensive maint and servicing listed in respective itms through qualified technical staff only. (b)Contractor will give gaurantee for one year from the date of completion of repair work carried out.(c) Any fault accured during gaurantee period shall be rectified by the contractor with out extra cost to the department.

400 KVA DG set

200KVA to 280KVA DG sets

100KVA to 125KVA DG sets

50 KVA to 82.5KVA DG sets

31.25 to 40 KVA DG set

7.5 KVA DG sets

Supply and filling engine oil CH4 15W40 suitable for Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing fuel filter element set suitable for 200KVA to 280 KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing fuel filter element set suitable for 100 KVA to 125KVA Kirloskar/Cummins engine all as specid and as directed.

Supply and fixing fuel filter element set suitable for 50KVA to 82.5KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing fuel filter element set suitable for 31.25KVA to 40KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing super By pass fuel filter element suitable for 200 to 280 KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing oil filter element suitable for 200 KVA to 280 KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing oil filter element suitable for 100 KVA to 125KVA Kirloskar/Cummins engine all as specid and as directed.

Supply and fixing oil filter element suitable for 50KVA to 82.5KVA Kirloskar/Cummins engine all as specid and as directed.

Supply and fixing oil filter element suitable for 31.25KVA to 40KVA Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing V-Belt of size B 1821 LP/ B70 suitable for Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing V-Belt of size B 46 suitable for Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing V-Belt of size A 70 suitable for Kirloskar/Cummins engine all as specified and as directed.

Supply and filling coolent suitable for radiator of Kirloskar/Cummins engine all as specified and as directed.

Supply and fixing diesel pipe from tank to diesel filter shuitable dia both side factory fitted union/elbow heavy duty each 5 mtr in length all as specified and as directed.

Supply and fixing diesel pipe from filter to fuel pump shuitable dia both side factory fitted union/elbow heavy duty each1.5 mtr in length all as specified and as directed.

Supply and fixing diesel return pipe from pump to diesei tank shuitable dia both side factory fitted union/elbow heavy duty each 5 mtr in length all as specified and as directed.

Supply and fixing oil pipe from engine pump to primary oil filter shuitable dia both side factory fitted union/elbow heavy duty each 1.5 mtr in length all as specified and as directed.

Supply and fixing oil pipe from oil pump to oil filter shuitable dia both side factory fitted union/elbow heavy duty each 3 mtr in length all as specified and as directed.

Supply and fixing oil pipe from primary oil filter to secondary oil filter shuitable dia both side factory fitted union/elbow heavy duty each 3 mtr in length all as specified and as directed.

Supply and fixing rubber hose pipe set shuitable for 200KVA to 280 KVA Kirloskar/Cummins DG sets all as specified and as directed.

Supply and fixing rubber hose pipe set shuitable for 100KVA to 125KVA Kirloskar/Cummins DG sets all as specified and as directed.

Supply and fixing rubber hose pipe set shuitable for 50KVA to 82.5KVA Kirloskar/Cummins DG sets all as specified and as directed.

Supply and fixing rubber hose pipe set shuitable for 31.25KVA to 40KVA Kirloskar/Cummins DG sets all as specified and as directed.

Supply and fixing air cleaner filter element suitable for 200KVA to280 KVA Kirloskar/Cummins engine all as specified.

Supply and fixing air cleaner filter element suitable for 100KVA to 125KVA Kirloskar/Cummins engine all as specified.

Supply and fixing air cleaner filter element suitable for 50KVA to 82.5KVA Kirloskar/Cummins engine all as specified.

Supply and fixing air cleaner filter element suitable for 31.25 KVA to 40KVA Kirloskar/Cummins engine all as specified.

Supply and fixing diesel tank caliberation transperant PVC pipe each 01 mtr in length heavy duty both side factory fitted elbow/union suitable dia all as specified and as directed.

Supply and fixing maintenance free battery 24 volt 180AH sealed in MS container by manufcturing unit ,having inbuilt charge including 03 Nos indicators for indicating the Main input,bty charging,bty full including three metre charging lead with three pin top all as specified and as dsirected by Engr-in charge.

Description all as per item No 34.00 here-in-above but capacity 12 volt 180 AH.

Maintenance and servicing of alternator 12/24 Volt of DG set installed at various installations and servicing/overhauling including replacing of worn out parts like, bearing, carbon brush, rewinding to alternator winding wth suitale size super enamelled copper wire including warnishing complete etc. and refitting the alternator 12/24 volts in position for smooth functioning of DG sets and testing complete in all respect all as directed by Eng-in-Charge. .Note:-(a) Contractor will carry out comprehensive maint and servicing listed in respective itms through qualified technical staff only. (b)Contractor will give gaurantee for one year from the date of completion of repair work carried out.(c) Any fault accured during gaurantee period shall be rectified by the contractor with out extra cost to the department.

200KVA to 280KVA DG sets

100KVA to 125KVA DG sets

50 KVA to 82.5KVA DG sets

31.25 to 40 KVA DG set

Maintenance and servicing of alternator 200KVA to 280KVA DG set installed at various installations including transportation to civil wksp for repair and servicing/overhauling including replacing of worn out parts like, bearing, carbon brush, rewinding to alternator winding wth suitale size super enamelled copper wire, insulating material including warnishing with air dry varnish,nut bolts and washer etc complete and refitting the alternator in position for smooth functioning of DG sets and testing on full load for the entire satisfaction of the Engr-in-charge complete in all respect all as directed by Eng-in-Charge. .Note:-(a) Contractor will carry out comprehensive maint and servicing listed in respective itms through qualified technical staff only. (b)Contractor will give gaurantee for one year from the date of completion of repair work carried out.(c) Any fault accured during gaurantee period shall be rectified by the contractor with out extra cost to the department.

Supply and fixing oil pressure gauge suitable for 200 to 280 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing oil pressure gauge suitable for 100 to125 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing oil pressure gauge suitable for 50 to 82.5 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing oil pressure gauge suitable for 31.25 to 40 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing fuel gauge suitable for 200 to 280 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing fuel gauge suitable for 100 to125 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing fuel gauge suitable for 50 to 82.5 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing fuel gauge suitable for 31.25 to 40 KVA DG sets(Make for-Kirloskar/Cummins engine)

Supply and fixing indicator lamp set( set of three i.e R Y B) all as specified

S & F battery charger set suitable for 12V DC battery operating on 230 V AC supply all as specifed and directed at site Engr -in Charge.

Material & Labour automatic voltage regulator suitable for 31.5 KVA to 40 KVA complete all as specified and directed at site by Engr - in- Charge

Description all as per Item No 53.00 above but for 50KVA to 82.5 KVA

Description all as per Item No 53.00 here in before but for 100KVA to 125 KVA

Description all as per Item No 53.00 here in before but for 200KVA to 280KVA

Material & Labour engine controll unit suitable for 31.5 to 40 KVA including taking down the old one complete all as specified and directed at site by Engr - in Charge.

Description all as per Item No 57.00 above but for 50 to 82.5 KVA

Description all as per Item No 57.00 here in before but but for 100 to 125 KVA

Description all as per Item No 57.00 here in before but for 200 to 280 KVA

Material & Labour for solenoid switch suitable for 31.5 to40 KVAincluding taking down the old one complete all as specified and directed at site by Engr- in Charge.

Description all as per Item No 61.00 above but for 50 to 82.5 KVA

Description all as per Item No 61.00 here in before but for 100 to 125 KVA

Description all as per Item No 61.00 here in before but for 200 to 280 KVA

Supply and Fix in replacement MCCB TPN 800 Amps , 415 Volts, 50 KA ,4 Pole, Ics=100% Icu , with microprocessor release IPRE+ (4 pole) 800 Amp overload adjustable short circuit adjustable type incl complete connection all as specified and directed by Engr-in-Charge.

Supply and fixing in repair On load change over switch 415 V, 4 pole, 400 Amps capacity fixed on DG Set incl necessary connection of cables from LT panels to change over switche complete all as specified and directed by Engr-in-Charge.

Note :- Amount of credit of Rs. 76340.00 for retrieved materials is mentioned in Schedule of Credit(Revised) mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender.

TARA ENTERPRISES

MAYANK ENTERPRISES

M/S Sonu Traders