Repair to certain Bldgs and other misc works at Dholewal Mil Complex under AGE B/R, GE Ludhiana

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed and removing rubbish off the premises.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L 25mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggreagte) as in floors finished complete all as specified and directed.

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 5 above but as in skirting over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick square/rectengular polished area of each tile exceeding 0.42 Sqm but not exc 1 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item No 7 above but as in skirting over rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L 50 mm thick PCC 1:4:8 type D-2 (with using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specfied and directed.

M&L 60mm thick interlocking coloured paver block with grey cement and no pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved laid in flooring and joints filled/broomed with fine sand complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L chequerred cement concrete tiles 30cmx30 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment , over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid over and including screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and granite polishing complete all as specified and directed.

All as per item No 13 above but in one piece as in riser ,treads of of stair,skirting/dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

S&F 38mm width of strip glass dividing strips, 3mm thick and inserted in position to confirm to design complete all as specified and directed.

M&L Endura ceramic tiles of size 300mmx300mmx10mm thick laid in floors etc., set and jointed in neat cement slurry and pointed in grey or coloured cement and pigment to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L for providing plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

M&L 16-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window-cills, cooking platforms and like over and including 10mm thick rendering in CM 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames n.exc. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

Taking down Shutters of any description area exc 1 Sqm but n.exc. 2 Sqm Each complete all as specified and directed.

Taking down Shutters of any description area exc. 1 Sqm but n.exc. 2 Sqm Each and refixing in the same opening complete all as specified and directed.

Taking down Shutters of any description area exc. 2 Sqm Each and refixing in the same opening complete all as specified and directed.

S&F pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25mm.

S&F pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25mm.

M&L providing cement concrete type C-1, 1:3:6 (20 mm graded crushed stone aggregate) as for hold fast/ pressed steel chowkhats complete all as specified and directed.

S&F factory made 2nd class 35mm thick hard wood plain, framed, panelled shutters (any number of panels) with panels of 9mm thick BWP commercial ply complete all as specified and directed. Type of wood as approved.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. Type of wood as approved.

S&F 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I complete all as specified and directed. Type of wood as approved.

S&F Door helical spring mild steel 300mm ordinary rat tail rod pattern including roller and roller plate complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including preparation of newly untreated surfaces complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed.

S&F 125mm aluminium handles, cast type , anodised complete all as specified and directed.

S&F floor door stopper of aluminium of 140 mm alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing including necessary aluminium fittings etc. complete all as specified and directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including necessary aluminium fittings complete all as specified and directed.

S&F Aluminium (Die cast body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F Sheet glass, ordinary quality, 5.5 mm thick in squares exc 0.5 sqm each pane complete all as specified and directed.

S&F Sheet glass, ordinary quality, 5.5 mm thick in squares nexc 0.5 sqm each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or Galvanised wire staples complete all as specified and directed.

All as per item No. 44 above but for steel windows, wooden shutters & aluminium windows including taking out old/rusted wire cloth from wooden shutters or steel /aluminium windows either cutting or taking out galvanised wire staples and provisioning/securing the wire cloth to shutters or windows as per existing specification complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (S type) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

M&L for Box type steel window/ventilator 1.25 mm thick made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. (f) Guard bar (square bar) size 10mmx10mm . Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

All as per item No 48 above but fixing with wire mesh complete all as specified and directed (painting and wire mesh paid seperately).

M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame area n.exc 0.5 Sqm in each pane including punching or drilling out old glazing pins complete all as specified and directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Sheet 3.0 mm thick frosted glass, squares nexc 0.5 sqm each pane complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 56 above but except bricks complete all as specified and directed.

M&L 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats white wash on wall surfaces including prepration of newly plastered surfaces complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished the surfaces even and smooth complete all as specified and directed.

M&L two coats cement base paint including preparation of newly plastered surfaces complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces of ceiling in cement mortar 1:3 finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on ceiling undecorated surfaces including prepration of newly plastered surfaces complete all as specified and directed.

M&L applying two coat of oil emulsion distemper over 3 mm wall care putty complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L framed work as in cooler stand, chowkhat for cup-board , doors or gates of angle or other section drilled for fixing and hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete (Fe410-W Gde E-250 Quality-A) all as specified and directed.

M&L Pre-laminated particle board thickness 18/19mm, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling boarding any description and in any position fixed with nails complete all as specified and directed.

M&L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps (when open) , mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F PVC magnet catcher fixed with screws to frames complete all as specified and directed.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs& MS / Aluminium grid, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (n.exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified and directed.

Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed.

S&F 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self tapping screw complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling unframed fillets, rails, posts, rafters, purlins, etc. over 40 sqcm in section complete all as specified and directed.

S&F Roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) complete all as specified and directed.

M&L two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation complete all as specified and directed.

M&L for Dholpur stone as on wall cladding with machine cut face work, pillar, arches , hexagonal roof pillar and all facing etc of 15 to 18 mm thick one side single length laid and jointed in cement mortar 1:2 including araldite chemical and recess pointed with an admixture of white cement and dholpur stone dust 1:1 and making edges, work in small patches, stone shall be of uniform colour of each stone and size not exceeding .25 Sqm each fixed over & including 10 mm thick cement plaster in CM (1:4) on brick or concrete wall surfaces finished rough surfaces to receive tiles dismantling of existing broken stones complete all as specified and directed.

Refixing of Dholpur stone after dismantling of existing loose stones as on wall cladding with machine cut face work, pillar, arches , hexagonal roof pillar and all facing etc of 15 to 18 mm thick one side single length laid and jointed in cement mortar 1:2 including araldite chemical and recess pointed with an admixture of white cement and dholpur stone dust 1:1 and making edges, work in small patches, stone shall e of uniform colour of each stone and size not exceeding .25 Sqm each fixed , over & including 10 mm thick cement plaster in CM (1:4) on brick or concrete wall surfaces finished rough surfaces to receive tiles complete all as specified and directed.

M&L for Post Constructional Antitermite Treatment by treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for voids in masonry using chemical emulsion on litre pre hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing walls complete all as specified and directed.

M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at downward angle of 45 degrees at 150mm centre to centre and sealing the same complete all as specified and directed.

Disconnecting existing water tanks for repairs, cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc and reconnecting in same position, of capacity exc 250 ltrs and not exc 500 ltrs each etc complete all as specified and directed.

All as per item No 86 above but capacity of tank exceeding 500 ltrs but not exceeding 1000 ltrs each complete all as specified and directed.

Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified and directed.

S&F precast cement concrete type B1, 1:2:4 (20 mm graded crushed stone aggregate) in frame work for precast cement concrete jallies , setting in mortar complete with joints to match complete all as specified and directed.

S&F precast cement concrete type B0,1:2:4 (12.5 mm graded crushed stone aggregate) louvres and jallies , 25 mm thick (measured in solid ) including all moulding but excluding frame complete all as specified and directed.

AGNIHOTRI CONSTRUCTIONS (BID ID -3353848)

M/S ANUJ KUMAR (BID ID -3357834)

ANUJ ABROL CONTRACTOR (BID ID -3354435)