Delhi

Cancelled

Works

Electrical Works

Replacement of 2 Nos. 13 Passenger lift at Delhi Archive, Qutab Institutional Area, New Delhi.

Public Works Department

New Delhi | South East Delhi, Delhi

Amount: ₹36.8 LCloses: 1 Sept 2026Closed

Timeline

Published25 Aug 2026
Closed1 Sept 2026
Cancelled14 Sept 2026

Bids

3 Bids14 Sept 2026

#	Company	Status
1	TECHNO INDUSTRIES PRIVATE LIMITED Accepted-Technical AHMEDABAD GUJARAT 382445 \| AHMADABAD \| GUJARAT \| 382445	Accepted-Technical Accepted
2	Evaan Elevators Pvt. Ltd. Not Admitted-Fee/PreQual/Technical 205 2ND FLOOR VARDHMAN CHAMBER LL 0 VIKASPURI WEST DELHI DELHI 110018 \| WEST DELHI \| DELHI \| 110018	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification
3	RAJA ELECTRICAL ENGINEERING WORKS Not Admitted-Fee/PreQual/Technical 15 119 DAKHINPURI NEW DELHI 110062 \| SOUTH \| DELHI \| 110062	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification

Cancellation Details

Cancellation of Tender

Tender CancellationAs per sheet attachedReason: Change in NIT conditions/SpecificationsDocument: cancelled_1.pdf

Published 14 Sept 2026

Tender Value

₹36.8 L

EMD Value

₹73,669

Closing Date

1 Sept 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

O/o The Executive Engineer (E) South Elect. Div., PWD, Sukhdev Vihar, Mathura Road, Near Okhla Flyover, New Delhi

Work Description

Replacement of 2 Nos. 13 Passenger lift at Delhi Archive, Qutab Institutional Area, New Delhi

Tender Information

Tender ID

2026_PWD_297554_1

Reference Number

42/EE(E) /EMD South Elect. Divn./PWD/2026-27/3rd call

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

180 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

RequiredCopy of Receipt for deposition of original EMD issued from division office of any Executive Engineer (.pdf)

Requirediii) The bidder has to upload an undertaking that the bidder shall associate the specialized agencie (.pdf)

Requirediv) Scanned copy of valid PAN Card as issued by the Income Tax Department. (Required from both) (.pdf)

Requiredv) Certificate of Registration for GST and acknowledgement of upto date filed return. (.pdf)

Requiredvi) Copy of Valid Electrical License OR Undertaking (.pdf)

Requiredvii) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-F (Required from both CPWD and Non (.pdf)

RequiredCPWD Registration OR certificate in list of MES BSNL and other OR Work experience certificate (.pdf)

Requireda. Scanned Copy of Letter of Transmittal. (For Non Registered Contractors only) (.pdf)

Requiredb.Copy of Financial Turnover last three financial year (For Non Registered Contractors only) (.pdf)

Requiredc. Profit/Loss statement last Five years ending 31st march 2025 (For Non Registered Contractors only (.pdf)

Requiredd. Solvency of minimum 40 of estimated cost OR Net Worth certificate (For Non CPWD Contractor Only) (.pdf)

Requirede. Affidavit on Non Judicial Stamp Paper of Rs. 100/- as per Form-E. (For Non Registered Contractors (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹73,669

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

14 Sept 2026

Published

25 Aug 2026

Bid Opening

1 Sept 2026

Download Starts

25 Aug 2026

Download Ends

1 Sept 2026

Submission Starts

25 Aug 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (32 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:-
1.01	(i) Speed-1 MPS (ii) Floors-5 (G+4) (iii) Travel -17 Meters (approx.) (iv) Stops & opening- 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to	-	-	-	-
1.02	announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging \|services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided	-	-	-	-
1.03	13 passenger (884kg)	2	Each	16,84,225.72	₹33,68,451.44
2	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.	4	Sets	7,658	₹30,632
3	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.	480	Mtr.	50	₹24,000
4	Supplying, Laying and fixing following size of PVC insulated and PVC sheathed al. conductor armoured power cable of 1.1 KV grade of following ways as reqd. (a) 3.5 X 50 sq.mm. cable cable on surface	225	Mtr.	984	₹2,21,400
5	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3½ X 50 sq. mm (35 mm)	8	Each	484	₹3,872
6	Pdg. and fixing of floor mounting compartmentalized cubical panel board minimum 400 mm depth with locking arrangement front openable, totally enclosed, dust & vermin proof fabricated out of 2mm thick cold rolled carbon annealed, sheet steel, with suitable incoming Amp 4 strip Al. bus bar, cable alley on both sides, powder coated paint of approved shade and 2 nos 25x5mm copper strips throughout the width of panel consisting of two earth studs on each strip complete with following incoming and outgoing switchgears including making connections/ inter connections with lugs/ thimble for switchgears and control wiring with 2.5 sq.mm PVC insulated FRLS copper conductor cable, including providing 50mm X 50mm X 6 mm thick Angle base upto 300 mm above ground level including necessary grouting / fixing on floor ( Drawing shall be got approved from Engineer-in-charge before fabrication(all MCCB's shall have spreader link & rotory handle) complete etc as required	1.1	Sq.mtr.	25,000	₹27,500
7Supply & fixing of following accessories in the existing cubical type M.S. panel board i/c drilling holes in cubical panel, making connections etc as reqd.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Cancellation Documents

cancelled_1.pdf

pdf • 0.14 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.09 MB

Work Item Documents

NIT.pdf

Tender Documents • 3.07 MB

BOQ_396408.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

TECHNO INDUSTRIES PRIVATE LIMITED

Accepted-Technical

AHMEDABAD GUJARAT 382445 | AHMADABAD | GUJARAT | 382445

Evaan Elevators Pvt. Ltd.

Not Admitted-Fee/PreQual/Technical

205 2ND FLOOR VARDHMAN CHAMBER LL 0 VIKASPURI WEST DELHI DELHI 110018 | WEST DELHI | DELHI | 110018

RAJA ELECTRICAL ENGINEERING WORKS

Not Admitted-Fee/PreQual/Technical

15 119 DAKHINPURI NEW DELHI 110062 | SOUTH | DELHI | 110062

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:-
1.01	(i) Speed-1 MPS (ii) Floors-5 (G+4) (iii) Travel -17 Meters (approx.) (iv) Stops & opening- 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to	-	-	-	-
1.02	announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging \|services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided	-	-	-	-
1.03	13 passenger (884kg)	2	Each	16,84,225.72	₹33,68,451.44
2	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.	4	Sets	7,658	₹30,632
3	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.	480	Mtr.	50	₹24,000
4	Supplying, Laying and fixing following size of PVC insulated and PVC sheathed al. conductor armoured power cable of 1.1 KV grade of following ways as reqd. (a) 3.5 X 50 sq.mm. cable cable on surface	225	Mtr.	984	₹2,21,400
5	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3½ X 50 sq. mm (35 mm)	8	Each	484	₹3,872
6	Pdg. and fixing of floor mounting compartmentalized cubical panel board minimum 400 mm depth with locking arrangement front openable, totally enclosed, dust & vermin proof fabricated out of 2mm thick cold rolled carbon annealed, sheet steel, with suitable incoming Amp 4 strip Al. bus bar, cable alley on both sides, powder coated paint of approved shade and 2 nos 25x5mm copper strips throughout the width of panel consisting of two earth studs on each strip complete with following incoming and outgoing switchgears including making connections/ inter connections with lugs/ thimble for switchgears and control wiring with 2.5 sq.mm PVC insulated FRLS copper conductor cable, including providing 50mm X 50mm X 6 mm thick Angle base upto 300 mm above ground level including necessary grouting / fixing on floor ( Drawing shall be got approved from Engineer-in-charge before fabrication(all MCCB's shall have spreader link & rotory handle) complete etc as required	1.1	Sq.mtr.	25,000	₹27,500
7Supply & fixing of following accessories in the existing cubical type M.S. panel board i/c drilling holes in cubical panel, making connections etc as reqd.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:-

1.01

(i) Speed-1 MPS (ii) Floors-5 (G+4) (iii) Travel -17 Meters (approx.) (iv) Stops & opening- 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to

1.02

announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided

1.03

13 passenger (884kg)

Each

16,84,225.72

₹33,68,451.44

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Sets

7,658

₹30,632

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

480

Mtr.

₹24,000

Supplying, Laying and fixing following size of PVC insulated and PVC sheathed al. conductor armoured power cable of 1.1 KV grade of following ways as reqd. (a) 3.5 X 50 sq.mm. cable cable on surface

225

Mtr.

984

₹2,21,400

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. (a) 3½ X 50 sq. mm (35 mm)

Each

484

₹3,872

Pdg. and fixing of floor mounting compartmentalized cubical panel board minimum 400 mm depth with locking arrangement front openable, totally enclosed, dust & vermin proof fabricated out of 2mm thick cold rolled carbon annealed, sheet steel, with suitable incoming Amp 4 strip Al. bus bar, cable alley on both sides, powder coated paint of approved shade and 2 nos 25x5mm copper strips throughout the width of panel consisting of two earth studs on each strip complete with following incoming and outgoing switchgears including making connections/ inter connections with lugs/ thimble for switchgears and control wiring with 2.5 sq.mm PVC insulated FRLS copper conductor cable, including providing 50mm X 50mm X 6 mm thick Angle base upto 300 mm above ground level including necessary grouting / fixing on floor ( Drawing shall be got approved from Engineer-in-charge before fabrication(all MCCB's shall have spreader link & rotory handle) complete etc as required

1.1

Sq.mtr.

25,000

₹27,500

7Supply & fixing of following accessories in the existing cubical type M.S. panel board i/c drilling holes in cubical panel, making connections etc as reqd.