Shifting of Overhead 11 Kv and L.T. Lines to underground 11 KV/LT XLPE cable and Placement of LT distribution Box from Fort Road Chauraha to Chaufatka, Prayagraj under Mahakumbh Mela 2024-25

Amount

Cartage of 11 Mtr long STP from Store to dump store/work Site Including loading and unloading.

Cartage of LT ABC from Store to dump store/work Site Including loading and unloading.

Cartage of ACSR Weasel conductor from Store to dump store/work Site Including loading and unloading.

Cartage of 11 KV 3x185 sq mm XPLE cable from Store to dump store/work Site Including loading and unloading.( per drum lengh-500 mtr approx.)

Erection & Commissioning of LT distribution boxes/kiosk on poles including all clamps & materials required for connections & sealing its connection in between Distribution Box & ABC 1x35/16 sq. mm LT PVC cable with required materials (All require materials ie D.B., clamp, insulator, piercing Connector, 1x35 and 1x16 sq mm cable, nut & bolts etc will be arranged by the Contractor)

laying and stringing of LT ABC (size 3x120+1x95+1x16) sq.mm with Spreading and stringing of 1 wire continuous weasel conductor for neutral including binding of insulator complete in all respect with LT clamp, dead End Clamp, i hook, Suspension Clamp, Piercing Connector ,LT Arms, with nut bolts, LT Shackle Insulator The work includes jumpering/connecting of conductor .(All Material provided by contractor Except ABC Conductor and Weasel Conductor)

Laying , Testing & commissioning of 1100 V Grade , PVC Sheathed steel strip armourd, aluminum conductor 3.5cx240 sqmm size LT XLPE insulated cable underground in 160mm dia HDPE pipe from the surface 750 mm or as per utility and site requirement . All material provided by contractor

Laying, Testing & commissioning of 1100 V Grade , PVC Sheathed steel strip armourd, aluminum conductor 3.5cx150 sqmm size LT XLPE insulated cable underground in 110mm dia HDPE pipe from the surface 750 mm or as per utility and site requirement . All material provided by contractor

Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5cx240sq mm LT cable (conversion of L.T. Overhead line into Underground line) All Material provided by contractor

Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5cx150sq mm LT cable (conversion of L.T. Overhead line into Underground line) All Material provided by contractor

MAIN LT PANEL AT SUB STATION- 250 KVA (Type A-3)Incomer 1 Set of 630 Amp. TP MCCB with Spreader & Extended handle Metering on Incomer - 1 Set of Digital Ammeter with ASS - 1 Set of Digital Voltmeter with VSS - 1 Set of LED type Phase Indicating Light (22.5 mm.) with Control MCBsOutgoing- 5 Set of 250 Amp. TP MCCB with Spreader & Extended handle ( 4 Nos. + 1 No. for capacitor panel) - 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle(Installation of LT Distribution Boards for LT underground system (Type-A, B & C) with foundation All Material provided by contractor.

Supply , installation ,testing & commissioning of outdoor type feeder pillar panel to be made of 2mm CRCA sheet and covers will be 1.6 mm CRCA sheet duly powder coated paint with 300amps a Al. busbar.(Type-B 1) Incomer - 250 Amp. TP MCCB 1 No Outgoing -63 Amp TP MCCB 6 No. installation of LT distribution Boards for underground system (Type A,B & C) with foundation . All Material provided by contractor.

Outdoor type feeder pillar panel to be made of 2mm CRCA sheet and covers will be 1.6 mm sheet duty powder coated paint with 300 amps Al. busbar. (Type-B3) Incomer- 100 Amp. TP MCCB-1No Outgoing- 63 Amp. - 4 Nos. Installation of LT Distribution boards for LT underground system (Type -A,B,&C) with foundation. All Material provided by contractor

Supply , installation , testing & commissioning of Lockable distribution boxes of size 450X400mm with bus bar 100 Amp. TPN to feed up to 10 houses (Type C) installation of LT Distribution Boards for LT undergrounding system (Type A,B & C) with foundation . All Material provided by contractor

Fixing of following 11 KV Heat Shrinkable Type Cable Termination kits conforming to VDE-0278/1EEE-48-1975/IS – 13573-1992 and ESI STD. 09-13 all other relevant Standards complete with all accessories for 11 KV, 3x185 sq mm XLPE cable. (Jointing kit will be arranged by the contractor).

Outdoor jointing kit. (Make Geeseal, Raychem, 3M)

Straight Through jointing kit. (Make Geeseal, Raychem, 3M)

Erection of 11 mtr double pole support with fixing of necessary clamps, Cross Bracing angle ,danger board ,number plate , barbed wire and other accessories like channel, insulator etc..(as per RESSPO) All material provided by contractor except 11 M Long St pole.

Erection of 11 mtr long STP support with fixing of necessary clamps and other accessories. (All material provided by contractor except S.T. Pole )

Grouting of ST Pole, grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastering around the plinth in ration 1:2:4 with 12 mm thickness curing of plinth should be done properly .(as per RESSPO) All material provided by contractor.

Earthing of support complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/support to M.S. earth rod. As per RESSPO and Electrical safety rules. All Material ie MS earthing Rod, Clamp, G.I. wire etc provided by Contractor.

Supply & laying of XLPE LT service armoured cable for single phase 2x4/2x6 sqmm in PVC pipe 32 mm dia. All Material provided by contractor

Supply & laying of XLPE LT service armoured cable for 4x10/4x16/25 sqmm in PVC pipe 50 mm dia. All Material provided by contractor

Earthing of LT Panel substation (outdoor type) body by 1.50 inch dia 10 feet deep chemical earth connection with G.I. strip of size 50X6 mm with clamp (All materials will be arranged by the Contractor)

Painting of ST Pole and its Channel & Clamps (double coat red oxide and double coat Alluminium paints. Painting materials provided by contractor.)

Laying of 11 KV 3x185 sq mm XLPE cable by machine drill method. The cable shall be laid at the depth of 900 mm from the surface of road including cartage. The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 11 KV Cable provided by Contractor)

Laying of cable by manual method with the help of HDPE in all horizontally under the road, minimum900 mm bellow from the surface for laying of HDPE Pipe and laying of 11 KV 3x185 sq mm XLPE cable in 6'' dia HDPE Pipe including cartage. (HDPE pipe will be provided by contractor except 11 KV XLPE cable)

Laying of 11 KV 3x185 sq mm XLPE cable by manual method. The cable shall be laid at the depth of 900 mm from the surface of road with the help of sand, brick & patiya including cartage. The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 11 KV XPLE Cable provided by Contractor)

Drilling in all horizontally to cross the road, 900 mm bellow from the surface for laying of HDPE Pipe and laying of 11 KV.3x185 sq mm XLPE cable in 6'' dia HDPE Pipe . HDPE pipe and Fixing clamp will be provided by contractor.

Hoisting of 11 KV 3x185 sq mm XLPE cable providing GI pipe of size 4” dia 3 M long on double pole including its jumpering, complete with clamps, nut & bolts. (All materials will be provided by contractor except 11 KV,3X185 sq mm cable)

Dismantling of 11 KV & LT over head line and carriage of material from work site/dump store to Naini store.

RAKESH ELECTRIC WORKS,ECID

M/S Ajay Tripathi

SHRI HANUMAN ENTERPRISES

M/s Amrawati Enterprises

M/S P.K. Enterprises

[email protected]

M/s Lucky Enterprises

M/s A.E. Enterprises