Annual Plan-PROVIDING PUMPSET FOR CHANGALAMOOLA UNNATHY -POOTHADI GP- Pr.No.217_26-General Electrical Work-DSR-2021

Amount

PUMPSET

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.13:Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

5.17:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

5.14:Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD345542/2025-2026:Supply and fixing of 32A, Bakelite HRC fuse with HRC fuse link

OD345539/2025-2026:Supplying and fixing 32A, 2 way Bakelite Neutral link mounted on DMC/SMC base with connection, in the existing meter board

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

OD348802/2025-2026:Supply and installation testing and commissioning of 1.5HP open well submersible, Monoblocks, Water cooled motor pump suitable for Single phase, 200V 50 Hz, AC supply conform to relevant ISS. Head 22/41/56 m,with a flow rate of 7000/5000/2000 LPH and should provide 5000 LPH at a head of 41 m with standard size delivery pipe (1.25 inch) connecting to the motor using leakproof materials with GI supporting hook as required including giving connection as per the direction of the engineer.,(Kirloskar/Texmo/Crompton/Deccan or equivalent brands),conforms to IS 14220/1.

OD348033/2025-2026:Supply and installation of L&T MR-G2 Single phase submersible pump controller 0.5 to 2HP with inbuilt indicators, ammeter, voltmeter,contactor, capacitors etc.

OD348156/2025-2026:Supply and connect a 1.25 inch HDPE pipe ISI (10 kg/cm2) to the existing pump set and as a delivery pipe with suitable connectors.

OD348157/2025-2026:Supply and installation of 1.25 inch Cast iron barrel nipple

OD348158/2025-2026:Supply and providing 1.25 inch or nearest size dia Gun metal non return valve (ISI)

OD348159/2025-2026:Supply and fix 1.25 inch or nearest size GI flange with the required bolt, nut, washer and gasket etc.

OD348160/2025-2026:Supply and installation of 1.25 inch full way valve

OD348161/2025-2026:Supply and providing 1.25 inch or nearest size stainless steel Hose collar with hose clip

OD345549/2025-2026:Supply and fix flat iron clamps made from 40 mm flat iron clamps with suitable-size bolts and nuts for fixing delivery pipe on the top of the well as required.

OD348182/2025-2026:Supply and laying of 20mm or nearest size Nylon rope

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.9:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

ABDUL NAZER K (BID ID -2424776)

Bidder Name

ABDUL NAZER K

SANTHOSH KUMAR KAMALADHARAN