AS AND AS TO FEB DEPARTMENT OFFICE SPACES IN BLDG. NO 18 AND PROVISION OF WASH ROOM FOR SPORTS GROUND AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) DM VISAKHAPATNAM

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

M&L for Linoleum of 3.2/3.3mm thick, plain coloured, laid dry in floors including stretching, cutting and fitting and sealed down with an approved adhesive of approved make and standard specifications like slip resistance, static load limit etc are as per ASTM F2034-18 standards, including removing the old/worn out linoleum sheet and cleaning / preparing the surface to laid down the new one, in office space floors and wall / skirting as per manufacturer instructions complete all as specified and directed.

M&L for powder coated aluminium(min thickness of powder coating 50micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap screws, etc complete all as specified and directed.

S&F alunimium door shutters powder coated (min thickness of powder coating 50micron)), aluminium section, weighing 0.55Kg/M including necessary jointing cleats, glazing clips, rubber neoprene packing handles 2 nos in each doors, hinges, anodised anluminum snap beading, screws etc complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 12mm thick prelaminated particle board exterior grade, laminated both sides with decorative finish fixed with snap beading with aluminium frame work complete all as specified and directed

S&F aluminium anodised grills of sections for door and windows with one or more rebates including jointing cleats /beading 'U' or 'H' channel for fixing etc, complete all as specified and directed.

S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 200mm long and 1 No mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5mm thick sheet glass and partly paneled with 12mm thick particle board pre-laminated fixed with glazing clips, rubber beadings and aluminium beadings complete all as specified and as directed. Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail : 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx)

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete all as specified and directed

S & F Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of weight between 61 to 80 kg complete all as specified and directed.

S&F sheet glass 5.0 mm thick ordinary quality fixed with UPVC beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed

M&L 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with snap beading with aluminium frame partitions work a complete all as specified and directed.

S&F Anodised Aluminium Frame Work (snap grid) for false ceiling Work made from Anodised Aluminium main /cross tee of size not less than 38 mm x 24 mm x 1.5 mm thick and 28 mm x 24 mm x 1.5 mm thick respectively for false ceiling of grid size 600 mm x 600 mm including necessary hanging arrangement comprising of 6 mm dia MS rod, 'J' bolts with necessary bolts, nuts and washer all as per manufacturer's instruction. The snap grid (main & cross section) shall be supported at ends all along the wall with Anodised Aluminium angle of size 40mmx25mmx2mm, weighing 0.36 Kg / RM. The main and cross tees shall be jointed at junction / crossings with anodized aluminium angle bracket of size 15mmxl5mmx1.5mm, weighing 0.12 Kg per running metre, fixed with suitable size mild steel, bolts nuts and washers complete as per manufacturer's instruction and as specified and directed including taking out old one..

M&L for providing pre painted fiber cement board 6 mm thick in ceiling fixed on GI snap grid as per manufacturer's instruction complete all as specified and as directed.

M&L for taking out deteriorated / leaking valley gutters of any shape, size and material from the work shop buildings at height of 6 m to 20 m including disconnecting the funnels from gutters & rain water pipe, in position and replacingthe valley gutterswith new Pre- painted galvalume aluminum zinc coating GI based plain sheet of 1.00mm thick made to shape and size required with 200mm over laps with double washer self driving screws at joint using leak proof jointing material (Tar roof compound or similar material) and fixed in position complete all as specified and as directed

Taking out deteriorated / unserviceable funnels of valley gutters of any shape, size and material from the work shop buildings at height of 6m to 20 m including disconnecting the funnels from gutters & rain water pipe, in position and Supply & fixing with new funnel made out of Galvalume plain sheet of 0.60mm thick to required shape and size to match with the existing funnels required with extra collar of 50mm over the actual outer diameter of rain water pipe and inserting into the rain water pipe with 150mm length in to the rain water pipe with double washer self driving screws using leak proof jointing material (Tar roof compound) or similar material and fixed in position complete all as specified and as directed

Taking out deteriorated / unserviceable rain water pipes of any shape, size and material including bends, tees etc fixed along with funnels of valley gutters of the work shop buildings at height of 6m to 20 m including disconnecting the pipes from the funnels of gutters, in position and S&F ISI marked HDPE Rain water pipes of 160mm dia along with required bends, elbows, tees, holding down clamps etc.,and making the joint leak proof by using leak proof jointing material and fixed in position complete all as specified and as directed Note :The above quoted rate includes bends, elbows, tees, holding down clamps etc

Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L rendering 10 mm thick in CM 1:4 using SBR Latex emulsion @ 4% by weight of cement on concrete surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed (Note : 1.Make of SBR emulsion / latex :: Sika, Fosroc, STP,Dr Sunanada, BASF, Star Coatings or any other approved make of E-in-cS branch . 2. Cost of SBR Latexis included i with plastering)

M & L preparation of newly plastered surfaces of and walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed.

Complete removal of existing treatment of old decorated surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil exceeding 1.50 Km but not exceeding 5 Km and depositing out side dockyard premises complete all as specified and as directed.

M&L PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L RCC (design mix) M-25 (using 20 mm graded crushed stone aggregate) as in foundation, plinth beams, base of column, footing and mass concrete etc. complete all as specified and directed.

M&L RCC (design mix) M-25 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts etc. complete all as specified and directed.

M&L RCC (design mix) M-25 (using 20 mm graded crushed stone aggregate) as in slab, supported on walls, beams, columns in floors, roofs, landing, shelves etc. complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing or similar work not. exc. 200 mm thick horizontal or sloping complete all as specified and directed as in fair finished surfaces complete all as specified and directed.

Use and waste form work to side of concrete foundation, footings, bases of columns, raft and beams and similar work, vertical or to batter as in rough finished surfaces of concrete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns etc. square, rectangular or polygonal section as in fair finished surfaces complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified and directed.

M&L M.S. TMT bars 5 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as specified and directed.

Pre-cast cement concrete 1:3:6 type C1(using 20 mm graded crushedstone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 10 mm thick plaster in CM (1:6) on brick or concrete surfaces of walls the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick plaster in CM (1:4) using SBR latex emulsion @ 4% by weight of cement on brick or concrete surfaces of walls the surfaces even and smooth without using extra cement complete all as specified and directed. (Note:- Cost of SBR latex emulsion is included in quoted rate)

M&L 5 mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces fair and even without using extra cement all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L hard core of broken stone of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for moorum /red bajari filling in floor or pavings etc . Laid in layers not exceeding 15cm thick ,spread leveled and rammed including watering complete all as specified and as directed. .

M&L 100 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in sub base of floor all as specified and directed.

Material & Labour for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 15 mm thick in 1:6 complete all as specified and as directed.

Material & Labour for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl rendering in CM 1:4, 10 mm thick complete all as specified and as directed.

Material & labour for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform,cooking platfoorm and like including cutting in oval shape for oval type WHB below counter basin etc,. in cement mortar (1:4) including pointing in white cemnt (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed.

Material & labour for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc., complete all as specified and as directed.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 174 of SSR Part -II complete all as specified and directed.

S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed

M&L 32 mm dia High density polyethylene (HDPE ) pipe of pressure rating 6 Kg /Sq.cm as in waste pipe (Short Length) fixed to wash hand basin waste etc complete to floor all as specified and as directed

S&F vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F PVC seat cover for pedestal pan complete all as specified and directed

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed.

S&F 15 mm dia PVC connections, 600 mm long with brass nuts of suitable size at two end complete all as specified and directed.

S&F vitreous China urinals, half stall type white,(excluding flushing cistern and flush pipe ) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed

S&F vitereous china urinal partition white of size 310x700mm etc. complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints laid in floor or trenches complete all as specified and directed

S&F 75 mm bore PVC (SWR) bends (any radius) complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.

S&F PVC (SWR) floor trap, 75 mm dia, plain with brass CP grating including jointing with solvent cement fixed complete all as specified and directed.

S&F 15 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed

S&F 20 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed

S&F 25 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed

S&F 40 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed

S&F 15 mm dia bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe of for brass ferrule complete all as directed.

S&F angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed

S&F 15 mm dia pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply & Fix health faucet 15 mm bore brass chromium plated jet spray with CP pipe of 900 mm long and connector complete all as specified and as directed.

S&F soap dish, vitreous china white, approximate size 160x160x90 mm complete all as specified and as directed

S&F tubular/towel rail 20 mm dia brass chromium plated 'D' type 60 cm long between flange brass CP all as specified.

S&F 20 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed all as specified and as directed.

S&F 25 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed all as specified and as directed.

S&F 40 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed .

Supply & fix brass ball valve 25 mm dia high pressure with polythene float and flynut complete all as specified and as directed.

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 with SBR latex @ 4% by weight oof cement finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.

M&L PCC 1:3:6 type C2 (using 40 mm graded stone, aggregate) as in concrete bed to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe all as specified and directed.

M&L PVC (SWR) drain pipe 160 mm dia in any length with rubber ring joints laid in floor or trenches complete all as specified and directed.

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 /160 dia pipe complete all as specified and directed.

M&L Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4)complete with joints to match complete all as specified and directed.

M7L Providing, cement concrete (1:2:4) Type-B1 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs n, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

SCHEDULE 'A' PART-II [ELECTRICAL WORKS]

M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick galvanised pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for one light / Fan /bazzer point controlled by one one way switches complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick galvanised pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for one 3 pin 5/6 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

M&L concealed point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick galvanised pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for for one 5 pin 15/16 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..

M&L Sub main wiring concealed type with two runs of 6.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through PVC rigid conduit with all fittings and accessories of PVC rigid conduit complete fixed to wall / ceiling etc incl one run of 6.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed. (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Two runs of 6.0 sqmm single core cable, one run of 6.0 sqmm earth continuity wire to be measured as one length

Supply & fixing 25 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete all as specified and directed.

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed.

S & F socket outlet 5 Pin, 5/6 Amps, flush type, multipurpose, conforming to IS all as specified and as directed.

S & F Switch socket combination 6 Pin, 16/6 Amps, flush type, multipurpose, conforming to IS all as specified and as directed.

S&F Electronic Regulator for ceiling fan of sweep 1200/1400 mm electronic type complete all as specified and as directed.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.

S&F energy efficient 20W LED batten type wall mounted tube light fittings, with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including connection with suitable 3 core wire from ceiling rose to fitting terminal with necessary fixing arrangement complete all as specified and directed.

Supply and fix LED recessed full open 2 x 2 feet with highly efficient light smoothy optics to deliver superior illuminous and energy saving of 36 Watts including connection with suitable 3 core wire from ceiling rose to fitting terminal complete all as specified and as directed Make :- CG/Havells/Bajaj/Phillips

S&F ceiling fan of sweep 1200 mm including all accessories, clamps wire etc. to hang the fan in position including provision of cable from ceiling rose to fan complete all as directed

S & F Exhaust fan 300 mm sweep, metal body with metal blades, with bird screen incl connecting up with provision of cable 0.5 sqmm twin core PVC insulated from ceiling rose/connector to fan including fixing the fan frame to wall opening with suitable size rag bolts after drilling, making hole to wall as per size and making good complete all as specified and as directed. Make - Havells/ CG / Khaitan/ Orient / Usha

S&F Factory made board distribution in sheet steel enclosure suitable for fixing MCBs SPN DB 4 way double door complete all as specified and as directed

Supply and fix MCB SP 240V, 6-32 Amps capacity C Curve complete complete all as specified and directed.

Supply and fix MCB SPN 240V, 6-32 Amps capacity C Curve complete complete all as specified and directed.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismentling taking down unsv one all as specified and directed. MAKE- Schneider, Cat Part No- A9HSND08 or equivalent of Legrand/L&T/ABB.

Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade PVC/ XLPE insulated armoured heavy duty electric cables (conforming to IS :1554(Part- I) / IS 7098 (Part- I)with aluminium conductor of cross sectional area 10 Sqmm 2 core complete all as specified and as directed.

M&L for sand cushioning for protection of cables (below, above and around the cable laid in trenches) complete using clean, dry sand complete all as specified and as directed.

Supply and laying well burnt bricks sub class 'B' laid breadthwise along length of cable in trenches after sand cushioning laid for underground cable protection complete all as specified and as directed

M&L for galvanised steel tube 40 mm bore light grade laying in trenches or fixed to wall floor etc. with all fittings complete all as specified and as directed

SATYAMEGHA ENGINEERS

SRI SIMHADRI COMPANY