Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAccepted-AOC HN 34 WARD NO 2 AT AND PO HINAUTI TEHSIL SIHAWAL DISTT SIDHI M P | SIDHI | MADHYA PRADESH | 486670 | ₹1.4 Cr | L1 | Accepted-AOC Lowest |
| 2 | L2₹1.4 Cr+₹3.4 L (2.41%)Rejected-AOC | ₹1.4 Cr+₹3.4 L (2.41%) | L2 | Rejected-AOC Not Lowest |
| 3 | L3₹1.4 Cr+₹4.2 L (2.96%)Rejected-AOC | ₹1.4 Cr+₹4.2 L (2.96%) | L3 | Rejected-AOC Not Lowest |
| 4 | L4₹1.5 Cr+₹13.7 L (9.75%)Rejected-AOC HOUSE NO 769 SOUTH CIVIL LINES MUZAFFARNAGAR UP 241001 | HARDOI | UTTAR PRADESH | 241001 | ₹1.5 Cr+₹13.7 L (9.75%) | L4 | Rejected-AOC Not Lowest |
| 5 | L5₹1.8 Cr+₹37.8 L (26.9%)Rejected-AOC 19192 STREET NO 8 BIBI WALA ROAD OPPOSITE DAV COLLEGE BATHINDA PUNJAB PIN 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹1.8 Cr+₹37.8 L (26.9%) | L5 | Rejected-AOC Not Lowest |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
8 Feb 2023, 6:00 pmClosed
CWE HILLS DEHRADUN
HQ CWE HILLS, MALL ROAD, DEHRADUN CANTT - 248003
PROVISION OF ONE LAKH GALLONS OVER HEAD TANK (OHT) AT CLEMENT TOWN UNDER GE CLEMENT TOWN DEHRADUN
2022_MES_572173_1
85324A/CLT/E8
Open Tender
Civil Works - Water Works
Lump-sum
365 days
GE CLEMENT TOWN
Class B Category a(i)
8 documents required · 8 mandatory
₹1,000
GE CLEMENT TOWN
₹2.1 L
Yes
3 Mar 2023
30 Dec 2022
15 Feb 2023
30 Dec 2022
8 Feb 2023
27 Jan 2023
Amount
SCHEDULE 'A' PART-I RCC OHT - 01 LAKH GALLON CAPACITY WITH 18.30 MTR STAGING: Construction of RCC over head tank 1.00 lakh gallon capacity with 18.30m staging complete all as shown on drawings.
TOTAL AMOUNT OF SCHEDULE 'A' PART-II (ROAD, PATH AND HARD STANDING ) For details see item No 1 to 6 of Schedule A Part-II in PDF Folder )
TOTAL AMOUNT OF SCHEDULE 'A' PART III (FENCING AND GATE ) For details see item No 1 to 23 of Schedule A part-III in PDF Folder )
TOTAL AMOUNT OF SCHEDULE 'A' PART IV-A (EXTERNAL WATER SUPPLY) For details see item No 1 to 9 of Schedule A part-IV-A in PDF Folder )
SCHEDULE 'A' PART IV-B (EXTERNAL WATER SUPPLY)
M&L for 150mm dia ductile iron pipe, centrifugally cast spun with socket and spigot ends, class K7 ISI Marked suitable for push on joint (rubber gasket D-jointing), conforming to IS-8329 (2000), in standard length with cement mortar lining inside the pipe, laid in trenches complete all as specified and as directed.
M&L for 100 mm dia ductile iron pipe, centrifugally cast spun with socket and spigot ends, class K7 ISI Marked suitable for push on joint (rubber gasket D-jointing), conforming to IS-8329 (2000), in standard length with cement mortar lining inside the pipe, laid in trenches complete all as specified and as directed.
M&L for construction of brick masonary valve chamber for valves and meaters of internal size 750mm x 750 mm x 750 mm with foundation of PCC 1:4:8 type D2 ,(unsing 40mm graded stone aggreagate) brick work with sub class B bricks built in cement mortar 1: 4 with 15 mm plastering both internal and external surfaces (externally 15cm below GL) and 75 mm thick floor in PCC 1:4:8 type D2 (unsing 40mm graded stone aggreagate) and finishing the floor surface even & smooth using extra cement including provision of MS sheet cover 5mm thick surrounded by MS angle iron of size 40 x 40 x 6mm frame work embeded in 50mm thick PCC coping of 1:3:6 type C-2(unsing 40mm graded stone aggreagate) with locking arrangement, white washing on brick massonery plastered exposed surface and painted with two coats of synthetic enamel paint (black/green colour) over red oxide primer on steel surface including earth work and excavation in hard / dense soil complete all as specified and directed.
M&L for construction of brick masonary valve chamber for valves and meaters of internal size 900mm x 900 mm x 900 mm with foundation of PCC (1:4:8) type D2 (unsing 40mm graded stone aggreagate), brick work with sub class B bricks built in cement mortar (1: 4) with 15mm plastering both internal and external surfaces (externally 15cm below GL) and 75 mm thick floor in PCC (1:4:8) type D2 (unsing 40mm graded stone aggreagate) and finishing the floor surface even & smooth using extra cement including provision of MS sheet cover 5mm thick surrounded by MS angle iron of size 40 x 40 x 6mm frame work embeded in 50mm thick PCC coping of 1:3:6 type C-2(unsing 40mm graded stone aggreagate) with locking arrangement, white washing on brick massonery plastered exposed surface and painted with two coats of synthetic enamel paint (black/green colour) over red oxide primer on steel surface including earth work and excavation in hard / dense soil complete all as specified and directed.
S&F aviation/ obstraction light LED type fixed on the top of OHT of any height including necessary fixing accessories etc complete all as specified and directed. Make:- Shakti Fixtures Pvt Ltd, Cat Part No. SZPALMX-2 or equivalent of make as specified.
M&L for earthing complete with galvanised steel earth plate of size 600 x 600 x 6 mm thick burried directly in ground not less than 2.5 mtr below groud level with top edge of earth plate not less than 1.5 meters below ground level connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt, thimbles, check nuts, washers surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate including concrete chamber of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate), with fair finish, inetrnal surface of concrete chamber shall be given internal dia 300 X 300mm, 15mm thick plaster in CM 1:4, funnel with wire mesh, RCC pit cover of 320 x 320 x 80 mm size (1:2:4) type B1 using 20 mm graded stone aggregate, adequate quantity of common salt, charcoal etc all, as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified incuding and provision of GI strip upto 7.5 mtr long with 40 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, Medium grade, including all excavation and earth work and connecting the earth strip to an earthing test point/panel including testing on completion complete alll as specified and directed. Note:- (1) RCC pit cover shall be precast of RCC (1:2:4) type B1, 80 mm thick reinforced with XPM weighting not less than 4 Kg/Sqm in lieu of CI cover (2) Cost of addtional GI strip more than 7.5 mtr will be measured and paid seperately under relevant item of Sch A
Taking down old un-serviceable sluice valve of 150 mm dia size and of any description and removal from site complete all as specified & directed.
Taking down old un-serviceable sluice valve of 100 mm dia size and of any description and removal from site complete all as specified & directed.
TOTAL AMOUNT OF SCHEDULE 'A' PART-V ( Demolition of RCC overhead tank one lakh gallon capacity at 18.30m high staging including RCC raft in foundation complete including Cedit) For details see item No 1 of Schedule A part-V in PDF Folder ) Note:- (i) The tenderers are advised to visit the site for demolition of above said RCC OH tank to be demolished including foundation and shall have to assess the cost of credit items retrieved receives after demolition. (ii) The cost shown under Estimated rate column no-5 of BOQ of ibid item is inclusive of cost for demolition & credit for retrieved items after Demolition. However the tenderers may offer more amount based upon the credit assessed by him at site. (iii) The rates indicated in column No-5 is tentative. However the bidder is at liberty to offer more credits. Under no circumstances the credit will be accepted below the estimated rate indicated in column-05 of BOQ.
Note :- Tenderes may note that amount quoted under item No. 06 above has been considered on minus side but by default it is on plus side. Therfore while arriving, it will be deducted double the quoted amount, if quoted amt is more than Rs 2,00,000/-, but if quoted amt is less than Rs 2,00,000/- then it will be deducted Rs 2,00,000/- plus quoted amt, from the total amount of BOQ, at the time of Acceptance of bid/ tender along with deduction of amont of credit Rs 51,100.00.
PATEL CONSTRUCTION CO
SHANTI CONSTRUCTION
M/s Arihant Builders
M/S MANI GARG CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .