Unforeseen Event Oriented Work as well as Supply at PS I to VI GJLC(Item No. 02)

Providing and Fixing of pressure gauge for VT Pump including replacement of GI joints, nipples and proper arrangement (5 Nos. at PS III,4 Nos. at PS IV, 3 Nos. at PS V,2 Nos. at PS VI)

Providing and Fixing of Temperature meter for VT Pump bearing housing including replacement of GI joints, nipples and proper arrangement (7 Nos. at PS I,6 Nos. at PS II, 5 Nos. at PS III,4 Nos. at PS IV, 3 Nos. at PS V,2 Nos. at PS VI)

Providing and Fixing of bearing temperature meter for 6.6 KV HT induction motor (4 Nos. at PS I for 150 KW Motor)

Preventive maintenance work of Transformer at site by Cleaning of all outside part of transformer, Filtration of transformer oil, Providing and replacement of Set of gasket of radiators/top cover and valve, damaged gasket of any other part ,including hydra/crane charges, Providing and replacement of valves in case of leakage, Providing and Replacement of broken Sundry items viz cover bolt, nut, plug cap, screw etc. ,tightening all nut bolt to prevention of leakage, Providing and replacement of silica gel breather, Replacement of WTI, OTI, MOG, OIL LEVEL INICATORS (Supply of WTI,OTI,MOG,OIL LEVEL INICATORS not in the scope of work) and painting from outside using two inner coat of Zink Chromate and two outer coat of gray paint at site 100 KVA (1 No. at PS III,1 No. at PS IV, 1 No. at PS V,1 No. at PS VI)

Painting of Power transformer from outside using two inner coat of Zink Chromate and two outer coat of gray paint 1000 KVA (1 No. at PS IV, 1 No. at PS V)

Painting of Power transformer from outside using two inner coat of Zink Chromate and two outer coat of gray paint (1 No. 2000 KVA at PS I,1 No. 2000 KVA at PS II,1 No. 1500 KVA at PS V,1 No. 1800 KVA at PS VI)

CO2 type fire extinguishers capacity 4.5 kg ISI mark

Supply of fibreglass reinforced plastic (FRP) Gauge plate for accurate measurement of water level, moulded and sandwiched with MS strip both side finish, front side engraved and molded computerized marking of bands and figures covered in radium, eye pleasent colour combination, laminated with high abrasioj grade polyurethane , provision of MS pressed channel for gauge plate more than 60 cm width etc., complete as directed. 30 cm wide

Smoke Grey paint for PS I to PS VI

Black paint for PS I to PS VI

Red oxide for PS I to PS VI

Thinner for PS I to PS VI

Wire Brush for PS I to PS VI

Providing and Fixing of IK08, IP 66 protected 100 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted for PS I to PS VI

P&F of 8 channel HD NVR for CCTV camera setup with remote acess feature. for PS I to PS VI

P&F of 5MP IP Dome Camera for CCTV camera setup with night vision motion detection and alarm (Make- CP plus/Hikvision/Godrej/Zebronics with two-year brand warranty) for PS I to PS VI

P&F of 8 Channel POE for CCTV camera setup for PS I to PS VI

P&F of 2 TB hard disk with 2 years warranty (Make- Sandisk/Seagate) for PS I to PS VI

Cat-6 cable for CCTV complete Roll (305 mtr) for PS I to PS VI

P&F of CCTV Rack/cabinet for PS I to PS VI

P&F of LED/Monitor 21.5 inch For CCTV (Make- LG/Samsung/Sony/Acer, FHD display with one year brand warranty) for PS I to PS VI

P&F of 5G modem for CCTV camera setup with SIM, LAN and wifi support for PS I to PS VI

P&F of 5MP IP Bullet Camera for CCTV camera setup with night vision, motion detection and alarm (Make- CP plus/Hikvision/Godrej/Zebronics with two-year brand warranty) for PS I to PS VI

P&F of 24-point connector heavy duty type 16 Amp ( Male - Female set) for PS I to PS VI