Annual Rate Contract For Electrification work in Different Buildings of Vadodara Municipal Corporation. (Percentage RATE BASIS)

Name of work : Annual Rate Contract for Electrification work in Different

Buildings of Vadodara Municipal Corporation.(%Rate Basis) (All Item Rate is

Quanti Rate (in

Sr no Item description Per Amount

1 1 Providing & Erecting 1.0mtr long G.I 837 each ₹

pipe bracket for LED/Tube light

Fitting. as per specifications

2 1 Providing & Erecting Chemical 8910 each ₹

Earthing with 3mtr. Long earth

electrode for the switching box as

per the technical specification given

in the tender document.

3 1 Providing & Erecting Chemical 4196 each ₹

Earthing with 1.25mtr. Long earth

electrode for Electric OR Streetlight

Pole/Switching Box OR LED fittings

as per the technical specification

given in the tender document.

4 1 Point wiring for Light / Fan/ Bell/ 351 each ₹

Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand

copper wires upto max length of

mt, in below type of pipe erected

with 6A Tissino Type ISI marked

flush type switch / bell push and

accessories erected on Metal /

PVC/Wooden Box covered with

mm thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete

5 1 Point wiring for Light / Fan/ Bell/ 297 pt ₹

Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand

copper wires upto max length of

mt, in below type of pipe erected

with 6A Tissino Type ISI marked

flush type switch / bell push and

accessories erected on Metal /

PVC/Wooden Box covered with

mm thick PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.( c) with

oval conduit /PVC casing capping

double lock type erected flushed on

wall/ceiling complete

6 1 Point wiring for FAN with 2-1.5 632 pt ₹

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr

length, in below type of pipe erected

with 6A Modular type switch and

hum free EME step type electronic

fan regulator mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling

as per pipe erected. with necessary

ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid

PVC pipe and accessories erected

flushed on wall/ceiling complete catt-

7 1 Point wiring for independent PLUG 310 ₹

with following size mains earth wire

of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

upto 10 mt length, in following below

of pipe erected complete with ISI

marked 3 / 5 Pin socket and tissino

type switch erected with earth

continuity connection erected on

Metal / PVC/Wooden box covered

with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet. [A] For

amp plug and 6 amp switch with 2-

1.5 sq. mm Cu. Mains from near by

switchboard/db board upto 6 mt.(a)

with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete

8 1 Point wiring for on board looped 66 pt ₹

PLUG with tissino type single pole

ISI marked Switch and Socket

erected with necessary connections

erected on wooden /Metal/ PVC

Box covered with 3 mm thick

PC(Polycarbonate) /Acrylic sheet for

open / concealed wiring for following

size.[A] For 6 Amp.

9 1 Point wiring for Light / Bell with 2- 445 Pt ₹

1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

up to 10 mtr length , in below type of

pipe erected with 6A Modular type

switch / bell push & accessories and

earth continuity of following type,

erected on PVC / Metallic/Wooden

box, single mounting base frame

covered with textured/metallic/white

front plate modules erected on / in

wall / ceiling as per pipe erected,

with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.(a)

with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete(a) with medium

class Rigid PVC pipe and

accessories erected flushed on

wall/ceiling complete CATT-III

10 1 Point wiring for secondary light point 131 pt ₹

with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires,

in below type of pipe to be erected

complete with earth continuity and

necessary connection with primary

light with accessories erected on

Metal / PVC / wooden box covered

with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed

wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid

PVC pipe and accessories erected

flushed on wall/ceiling complete

11 1 Point wiring for Individual Plug with 471 pt ₹

& earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in

below type of pipe erected complete

with Modular type switch & 5 pin

Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules

erected on / in wall / ceiling as per

pipe erected with following type of

accessories.[I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db

board(a) with medium class Rigid

PVC pipe and accessories erected

flushed on wall/ceiling complete catt-

12 1 Point wiring for on board Looped 255 pt ₹

Plug with 6A Modular type switch &

pin socket erected on PVC /

Metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected on / in wall /

ceiling with following type

accessories catt-iii

13 1 Providing following type of Modular 150 each ₹

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In

charge.(1)One No. SP 6 Amp.

14 1 Providing following type of Modular 395 each ₹

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In charge.(5)

Electronic hum Free steps EME Fan

regulator catt-iii

15 1 Providing following type of Modular 25 each ₹

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In charge(7)

blank plate catt-3

16 1 Providing following type of Modular 179 each ₹

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In charge(9)

Amp. SP one way switch

17 1 Providing following type of Modular 198 each ₹

Type Accessories mounted with PVC

/ metallic/Wooden box, single

mounting base frame covered with

textured / metallic/white front plate

modules erected with necessary

connections as per site situation

directed by Engineer In charge(10)

6/16Amp. Universal socket

18 1 Providing & erecting following type 27 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(1) 6 Amp. SP

19 1 Providing & erecting following type 51 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(2) 16 Amp. SP

20 1 Providing & erecting following type 82 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(3) 6/16Amp.

Universal socket

21 1 Providing & erecting following type 42 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(4) 6 A socket

22 1 Providing and erecting ISI mark 33 mtr ₹

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed (b)

23 1 Providing and erecting ISI mark 54 mtr ₹

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed

24 1 Supplying & erecting UPVC Mini 31 mtr ₹

trunking (PVC Casing-n-Capping)

having double-locking arrangement

with grooves, trunking of size not

below 12.5 mm in height as per IS

with accessories of PVC/Resin

polypropylene not below 1.8 mm

thick duly sealed in joint & erected on

wall / ceiling of following size .(2)

25 1 Supplying & erecting UPVC Mini 36 mtr ₹

trunking (PVC Casing-n-Capping)

having double-locking arrangement

with grooves, trunking of size not

below 12.5 mm in height as per IS

with accessories of PVC/Resin

polypropylene not below 1.8 mm

thick duly sealed in joint & erected on

wall / ceiling of following size .

26 1 Supplying and laying UPVC cable 275 mtr ₹

trunking system comprising

unplasticised polyvinyl, chloride rigid

material with ignition free and flame

proof confirming BS with necessary

end caps Internal and external bend,

flat bends, coupler, tee etc..All

necessary accessories and

measuring of following sizes(1)

mm x 50 mm trunking

27 1 (2) 100 mm x 50 mm trunking 424 mtr ₹

28 1 (3) 50 mm x 50 mm trunking 187 mtr ₹

29 1 Providing and erecting Mains with 62 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated continuity of following size

(A) With medium class Rigid PVC

pipe and accessories stranded wire

of green colour for earth (a) 2 wire

30 1 Providing and erecting Mains with 82 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated continuity of following size

(A) With medium class Rigid PVC

pipe and accessories stranded wire

of green colour for earth (a) 2 wire

31 1 Providing and erecting Mains with 56 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

size (C) With oval conduit /PVC

casing capping double lock type (a)

2 wire 1.5 sq. mm

32 1 Providing and erecting Mains with 46 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

size;- Do But (E) (a) 2 Wire 1.5 Sq.

m.m. in existing pipe

33 1 Providing and erecting Mains with 56 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

size (D) With oval conduit /PVC

casing capping double lock type (a)

wire 1.5 sq. mm

34 1 Providing and erecting Mains with 82 mtr ₹

1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper

conductor wire in following type of

pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

size (C) With oval conduit /PVC

casing capping double lock type(b)

wire 2.5 sq. mm

35 1 providing and erecting Mains with 1.1 111 mtr ₹

KV grade FRLS PVC insulated ISI

marked stranded Copper conductor

wire in following type of pipe to be

erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC

insulated stranded wire of green

colour for earth continuity of following

size.(A) with medium class Rigid

PVC pipe and accessories(a) 2 wire

36 1 (A) with medium class Rigid PVC 179 mtr ₹

pipe and accessories(g) 4 wire 4 sq.

37 1 Providing & Erecting following 31 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(1) One no Single pole 6 A

Switch / Bell push

38 1 Providing & Erecting following 31 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(2) One no 3/5 pin 6 A Socket

39 1 Providing & Erecting following 47 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(3) One no Single pole 16 A

40 1 Providing & Erecting following 47 each ₹

Shockproof tissino type accessories

erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/

ceiling.(4) One no 6/16 A Universal

41 1 Providing & erecting following type 27 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(1) 6 Amp. SP

42 1 Providing & erecting following type 51 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(2) 16 Amp. SP

43 1 Providing & erecting following type 82 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(3) 6/16Amp.

Universal socket

44 1 Providing & erecting following type 42 each ₹

of Modular Type Accessories with

necessary connection. As desired by

Engineer In charge(4) 6 A socket

45 1 Providing & erecting Switch board 329 each ₹

for Computer or electric apparatus

consisting of following items in

single board erected on PVC /

Metal/Wooden board

concealed/open with 3 mm thick PC

(Polycarbonate) / Acrylic sheet

erected as directed

1 no. 6A/16A universal plug-switch

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ( For Tissino

Type AccessoriesFor Tissino Type

46 1 Providing & erecting Switch board 1122 each ₹

for Computer or electric apparatus

consisting of following modular type

accessories mounted with PVC /

Metallic concealed/open box with

single mounting base frame covered

with textured/metallic /white front

plate,modules erected with

necessary connections as directed1

no. 6A/16A universal plug-switch

combined.3 nos. 6A Switch3 nos. 6A

5 pin Plug ( For Modular Type

Accessories ) CATT-II

47 1 Supplying & erecting Approved make 147 each ₹

call bell indicator with buzzing sound

and Red light indicating lamp with

Red light button to attend the call

suitable for 240 v 50 c/s supply to be

48 1 Call bell / Buzzer,250 volts, complete 31 each ₹

49 1 Call bell gong type suitable for 230 42 each ₹

volts, 50 c/s. AC supply complete

50 1 Decorative call bell Ting-tong box 71 each ₹

type 250 volts complete erected

51 1 Supplying & erecting Electronic Type 248 each ₹

Cordless Call Bell erected on

PVC/Metal board having portable

bell push working on D.C. & bell on

230V A.C. supply with cells / battery

52 1 Supplying and erecting approved 476 each ₹

make of tube fitting with One no T-5

tube 24/ 28 W with Electronic

ballast with each tube separately

THD less than 10 & built in adaptors,

GI / PVC housing & mirror optic

reflector, suitable to work on 120V -

300V, A.C. supply with connector

and adapter if required. [Make of

fitting & tube may be differ& fitting

shall be providing with tube] CATT-

53 1 Supplying and erecting LED indoor 293 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Tube Light with integral

driver(iii) 18-20 Watts, Surge -

2KV,IP-20, conventional 4 feet

54 1 Supplying and erecting LED indoor 164 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Tube Light with integral

driver(i) 5-10 Watts, Surge-2 KV, IP-

20, conventional 1 to 2 feet

55 1 Supplying and erecting LED indoor 1777 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name 160V to

270V,Power Factor more than 0.9,

THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(B) LED Panel Light with

provision for Plane front frame with

translucent cover fixed to housing

complete.IP20.(vi) 36 watts, 24" x

24", Surge- 2KV.CATT-III

56 1 Supplying and erecting LED indoor 370 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/ aluminium die cast

powder coated and high U.V. &

corrosion resistance with diffuser

with company mark/name 160V to

270V, Power Factor more than 0.9,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Tube Light with integral

driver.(iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet

57 1 Supplying and erecting led lamps 69 each ₹

with following wattage capacity of

220 to 240 voltage, minimum

burning hours life, 500 V in built-

surge protection,Polycarbonate

diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >= 0.5.(A)

LED Lamps integral type, with PC

diffuser suitable LAMP holder . (i)

to 3 watts CATT-III

58 1 Supplying and erecting led lamps 111 each ₹

with following wattage capacity of

220 to 240 voltage, minimum

burning hours life, 500 V in built-

surge protection,Polycarbonate

diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >= 0.5.(ii)

59 1 Supplying and erecting LED indoor 423 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more

than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20.(ii) 11-

15 watts, Surge-2 KV Catt-iii

60 1 Supplying and erecting LED indoor 584 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name 160V to

270V,Power Factor more than 0.9,

THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 %( fitting

required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20.(iii) 16-

20 watts, Surge-2 KVCatt-iii

61 1 Supplying and erecting LED indoor 751 each ₹

fittings with LEDs of wattage

Watt to 0.5 Watt assembled on

single MCPCB, with housing used

as a heat sink shall be made of thick

sheet Steel conforming to IS:

513/CRCA/aluminium pressure die

cast powder coated and high U.V. &

corrosion resistance with diffuser

housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more

than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.).(A) Square/ Circular shaped

Surface/Recessed Mount Downlight

with provision for spring loaded

mounting clips complete.IP20.(iv) 22-

24 watts, Surge-2 KV

62 1 Supplying and erecting LED street 3312 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (i)

above 36 to 48 watts.Catt-iii

63 1 Supplying and erecting LED street 4948 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (ii)

above 48 to 60 Watts.caii-iii

64 1 Supplying and erecting LED street 5917 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)A) Street Light (IP-65), Surge

protection -4KV integral and ,Light

must have 440VAC line supply with

over-voltage protection. (iii) Above

60 to 90 watts.catt-iii

65 1 Supplying and erecting LED street 6501 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection. (iv)

above 90 to 120 watts.CATT-III

66 1 Supplying and erecting LED street 7798 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection.

(v)above 120 to 160 watts.catt-iii

67 1 Supplying and erecting LED street 9018 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection.

(vi)above 160 to 200 watts.CATT-III

68 1 (a) LED Bollard fittings of minimum 2058 each ₹

height 400 mm & dia.100mm having

polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium

finished powder coated pipe with

base plate 160x160mm with erection

by M8x75mm fastner with required

RCC foundation.IP65 for 9 to 20 watt

,surge-4kv cat-III

69 1 Supplying and erecting LED street 10162 each ₹

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optics/ lenses, with toughened glass

with company mark/name engraved

or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings.The

Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and

,Light must have 440VAC line supply

with over-voltage protection.

(vii)above 200 to 250 watts.CATT-III

70 1 Providing Approved make Double 323 each ₹

Pole Cast Iron Clad Switch &

rewirable Fuse 240 / 250 V

confirming to IS.(a)16A. CATT-III

71 1 Providing Approved make Double 509 each ₹

Pole Cast Iron Clad Switch &

rewirable Fuse 240 / 250 V

confirming to IS.(b)32 A Catt-iii

72 1 Providing Approved make Triple 1958 each ₹

Pole Metal / Iron Clad Switch & Fuse

with neutral link 415/500 V

confirming to IS.(a)63A catt-iii

73 1 Providing Approved make Triple 3399 each ₹

Pole Metal / Iron Clad Switch & Fuse

with neutral link 415/500 V

confirming to IS (b) 100A CAT-III

74 1 Pproviding and erecting Approved 6112 each ₹

make Four pole moulded case circuit

breaker having breaking capacity

ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to

100A. with Fixed thermal & magnetic

release suitable to work on A.C.

supply 50 c/s. with all internal

connections, spreader tinned copper

& complete erected in existing

G.M.S. housing. ICS=100% of ICU

75 1 Providing and erecting Approved 7976 each ₹

make Four pole moulded case circuit

breaker having breaking capacity

ICU of 35 KA. at 415 V. having

normal current rating 125A. with

Fixed thermal & magnetic release

suitable to work on A.C.supply

c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

76 1 Providing and erecting Approved 20739 each ₹

make Four pole moulded case circuit

breaker having breaking capacity

ICU of 35 KA. and above at 415 V .

having normal current rating 250A.

with variable thermal & magnetic

release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper

& complete erected in existing

G.M.S. housing.CS=100% of ICU

77 1 Supply of Approved make Iron Clad 17738 each ₹

or metal clad four pole change over

switch 415V. confirming to IS of

following capacity (A) 200 A / 250 A

78 1 Providing and erecting Approved 24979 each ₹

make Four pole moulded case circuit

breaker having breaking capacity

ICU of 50 KA and above at 415 V

having Normal current rating 400A.

with variable Thermal & magnetic

release suitable to work on

A.C.supply 50 c/s. With all internal

connections, spreader tinned copper

& complete erected in existing

G.M.S. housing. ICS=100% of ICU

79 1 Providing and erecting busbar 4378 Rmtr ₹

chamber confirming to IS-375

fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged

door with rubber gasket and

necessary busbar supports with

COPPER busbar having current

density not more than 1.6 Amp. /

sq.mm (Rated current / cross section

area) duly wrapped with colour

insulation tape for phase sequence,

three phase & neutral each suitable

for following current capacity with

necessary painting mounted on wall

or pedestal frame of required size

with necessary connections.(A)

Suitable for 63/100 Amp. capacity

80 1 Providing and erecting busbar 5675 Rmtr ₹

chamber confirming to IS-375

fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged

door with rubber gasket and

necessary busbar supports with

COPPER busbar having current

density not more than 1.6 Amp. /

sq.mm (Rated current / cross section

area) duly wrapped with colour

insulation tape for phase sequence,

three phase & neutral each suitable

for following current capacity with

necessary painting mounted on wall

or pedestal frame of required size

with necessary connections.(B)

Suitable for 200 Amp. capacity

81 1 Supplying KITKAT pattern porcelain 145 each ₹

cut-out fuse with base of following

current capacity erected on existing

block board.(iv) 63 A 500 V

82 1 Supplying KITKAT pattern porcelain 276 each ₹

cut-out fuse with base of following

current capacity erected on existing

block board. (v) 100 A. 500 V.

83 1 providing and erecting Miniature 268 each ₹

circuit breaker single pole 0.5A to 2A

system and having breaking capacity

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

84 1 providing and erecting Miniature 111 each ₹

circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C.

system and having breaking capacity

10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI

85 1 Providing & erecting 240 V MCB 297 each ₹

double pole switch for motor &

inductive load (C Curve) having

KA breaking capacity & confirms to

IS : 8828 in existing box having

following capacity A) 6 to

86 1 Providing & erecting 240 V MCB 327 each ₹

double pole switch for motor &

inductive load (C Curve) having

KA breaking capacity & confirms to

IS : 8828 in existing box having

following capacity (B) 40 Amp.cat-iii

87 1 Providing & erecting 415V MCB Four 573 each ₹

Pole Switch for Lighting Load (B

curve) having 10KA breaking

capacity & confirms to IS :8828 in

existing box having following

capacity(a) 6 to 32 Amp.catt-iii

88 1 Providing & erecting 415V MCB Four 632 each ₹

Pole Switch for Lighting Load (B

curve) having 10KA breaking

capacity & confirms to IS :8828 in

existing box having following

capacityb)40 Amp.catt-iii

89 1 Providing and erecting four pole 590 each ₹

Miniature isolator A.C. 22 duty

confirms to IS 13947-3 in existing

box.(b) for 63 Amp. catt-iii

90 1 Sheets steel powder coated 175 each ₹

enclosure suitable for incorporating

One/Two nos. MCB.

91 1 Providing and erecting Sheet Steel 696 each ₹

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1

& 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be used)

suitable for.(A) single phase

incoming and horizontal single phase

outgoing.single door (IP-30).(iii)8

92 1 Providing and erecting Sheet Steel 877 each ₹

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1

& 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be used)

suitable for.(A) single phase

incoming and horizontal single phase

outgoing(b) sheet steel double door

(IP-43)(ii)6 way

93 1 Providing and erecting Sheet Steel 1478 each ₹

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1

& 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be used)

suitable for.(A) single phase

incoming and horizontal single phase

outgoing.(b) sheet steel double door

(IP-43)iv)12 way

94 1 Providing and erecting Sheet Steel 1893 each ₹

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1

& 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be used)

suitable for.(B) three phase incoming

and single phase horizontal type

outgoing Per phase isolation type

(PPI).(a) sheet steel SINGAL

95 1 Providing and erecting Sheet Steel 2421 each ₹

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1

& 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of

MCBs.(The DBs should be used of

same company of MCB to be used)

suitable for.(B) three phase incoming

and single phase horizontal type

outgoing Per phase isolation type

(PPI).(a) sheet steel singal door(iiI)8

96 1 providing and erecting Approved 2213 each ₹

make RCCBs conforming to IS:

12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase

V,50Hz. having characteristic of

quick action & tripping with all

advance feature & do not incorporate

any electronic component. for

following Max. rating erected as

directed.(ii) 40Amps. DP.catt-iii

97 1 Providing and erecting Sheet Steel 12061 each ₹

powder coated Vertical MCB

distribution board (VTPN) - flush /

surface mounted double door (IP54)

fitted with insulated copper busbar,

isolated neutral link, earth bar and

DIN rail, confirming to IS 13032 and

BS 5486-1986,IP-54 suitable for

63/100 AMP TPN MCCB + RCCB

as incomer and three phase

outgoing as per following .(The DBs

should be used of same company of

MCB to be used) (B)6 way outgoing

98 1 Providing and erecting Approved 3010 each ₹

make RCCBs conforming to IS:

12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on 3 phase and neutral

415V,50Hz. having characteristic of

quick action & tripping with all

advance feature & do not incorporate

any electronic component for

following Max. rating erected as

directed.(iii) 63 Amps. FP.catt-iii

99 1 Providing and erecting Annealed 787 kg ₹

bare Copper wire 8 to 16 SWG.

100 1 Providing & erecting weather proof, 19196 sq.mtr ₹

dust & vermin proof, floor mounted

front operated indoor type cubical

panel board necessary IP-42 and

above protection as per approval

from engineer incharge made from

14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions

with necessary accesories

supporting angles/ flats channel

including cutting, bending, drilling,

welding, riveting with internal

partitions & cable alley as per

requirements & instruction of

engineer-in-charge with erection of

.....supplied switch gears,

BUSBARS, suitable size of inter

connecting PVC copper wire /

copper-aluminium strips, rubber

grommets, rib, bakelite control

fuses/MCB for measuring

instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates,

sufficient nos. of hinged doors,

handles with locking arrangement

and rubber gasket,heavy duty end

terminal connection,danger notice

board,necessary ventilation,earthing

strip complete. The Panel shall be

painted with epoxy powder

coating.(The rates excludes the cost

of switchgears, bus bars, inter

connecting mains & Copper

Aluminium strips, meters, Fuses etc.

The dimension shall be measured

excluding base beams) The panel

shall be supplied with following

approved manufacturers with

following size.(B) The standard

companies switch gear shall be used

and only manufacturers at CPRI

approved factory(ii) With 550 mm.

101 1 Providing and erecting Steel cover 2535 sqmtr ₹

as per drawing using 16 SWG

M.S.sheet of following depth, to

house the switch gear etc. complete

with locking arrangement and lock

with duplicate keys per cupboard and

door handles erected with necessary

support and painting. [One coat red

oxide and two coat enamel

paint].(B)Without angle iron frame.(i)

For 25 cms. Depth

102 1 Supplying & erecting XLPE(IS:7098) 71 mtr ₹

(I)-88 ISI unarmoured Aluminium

cable 1.1 KV.grade to be erected as

directed of following size. (C) 2 core

103 1 Supplying & erecting XLPE(IS:7098) 79 mtr ₹

(I)-88 ISI unarmoured Aluminium

cable 1.1 KV.grade to be erected as

directed of following size. (C)3 core

104 1 Providing and erecting 106 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following

size of cables. (C) 3 core 6 Sq. mm

105 1 Providing and erecting 218 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following

size of cables .(B) 3 1/2 core 35 Sq.

mm ( 16 Sq. mm 1/2 core)

106 1 Providing and erecting 282 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following

size of cables .(C) 3 1/2 core

Sq. mm ( 25 Sq.1/2 mm core)

107 1 Providing and erecting 535 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe of following

size of cables .(F) 3 1/2 core

Sq. mm ( 70 Sq. mm 1/2 core)

108 1 Providing and erecting 285 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with

necessary clamps or in existing

trench / pipe at road crossing or

floor of following size of cable.(B)

109 1 Providing and erecting 1336 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with

necessary clamps or in existing

trench / pipe at road crossing or

floor of following size of cables.(A)

1/2 core 25 Sq. mm ( 10 Sq. mm

110 1 Providing and erecting 1849 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with

necessary clamps or in existing

trench / pipe at road crossing or

floor of following size of cables.(B)

1/2 core 35 Sq. mm ( 16 Sq. mm

111 1 Providing and erecting 1490 mtr ₹

XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper

conductor for 1.1 KV. to be laid on

wall with necessary clamps or in

existing trench / pipe at road

crossing or floor of following size of

cables.(C) 4 core 25 Sq. mm

112 1 Providing & laying approved make 62 mtr ₹

Double walled corrugated pipes

(DWC) of polyethylene(conforming to

IS 14930 II )with necessary

connecting accessories of same

material at required depth in existing

trench for laying of cable. below

ground / road surface for enclosing

cable.(A)50 mm outer dia

113 1 Providing and erecting Approved 1581 each ₹

make Ceiling fan with double ball

bearing ISI mark with condenser

A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing

hook or clamp with earthing. [Make

shall be approved by Engineer in

114 1 Supplying and erecting 19 / 20 mm. 107 each ₹

nominal bore Medium Class M.S.

Pipe down rod erected duly painted

for fan complete with proper

insulation without leakage and

115 1 Supplying & erecting Fan Hook of 10 43 each ₹

mm M.S. Round bar grouted in RCC

slab with Making the site as original.

116 1 Supplying & erecting approved make 1353 each ₹

low noise decorative exhaust fan

having square frame ABS body with

inbuilt lowers & square frame.200mm

with 1350RPM Cat.II

117 1 Supplying and erecting approved 2509 each ₹

make oscillating type bracket fan

sweep wall mounted with height

adjustment and rotary tilting device

complete with guard, flexible Core

plug top complete erected with lead

wires as directed.catt-ii

118 1 Supplying and erecting approved 2120 each ₹

make pedestal fan A.C. 230V.

Cy/s. 400 mm sweep oscillating, type

and adjustable, height complete with

guard regulator, & standard lead

flexible wires and plug top.catt-iii

119 1 Conveyance charges for Ceiling fan, 26 each ₹

Table fan, Exhaust fan, Pedestal fan,

Bracket fan and cabin fan etc.(from

store to worksite OR site to workshop or

back for repairing)

120 1 Removing the installed Ceiling fan / 43 each ₹

Exhaust Fan for servicing / repairing

from ceiling and reinstalling the same

after making in working condition.

121 1 Servicing the uninstalled ceiling fan with 34 each ₹

washing & throughing blades, canopies,

making dry , checking all nut-bolts,

replacing quarter pin & oiling /greasing

and testing complete.

122 1 Rewinding of Any fan by using supper 398 each ₹

enamelled copper wire and over hauling

and putting in working order with original

speed with guarantee for one year

including credit of D.M. retained by

123 1 Replacing the bearing/ bushing of 102 each ₹

Ceiling fan and putting the fan in

working order including credit of D.M.

retained by Agency.(a) Bearing

124 1 Replacing the bearing/ bushing of 43 each ₹

Ceiling fan and putting the fan in

working order including credit of D.M.

retained by Agency.(b) Bushing

125 1 Replacing condenser for ceiling fan/ 64 each ₹

Exhaust Fan / Pedestal Fan / Table Fan

/ Cabin Fan {Credit of D.M. retained by

126 1 Replacing the bearing/ bushing of Table 85 each ₹

fan Pedestal Fan / Exhaust Fan and

putting the fan in working order including

{Credit of D.M. retained by Agency.}(a)

127 1 Replacing the bearing/ bushing of Table 51 each ₹

fan Pedestal Fan / Exhaust Fan and

putting the fan in working order including

{Credit of D.M. retained by Agency.}(b)

Bushing rubber, ring, washers

128 1 Rewinding of 2900 RPM, 25OV. Fan 484 each ₹

Motor of air circulators by using supper

enamelled copper wire and over hauling

& put in working order with original

speed with guarantee for one year

including transportation from site & back

including {Credit of D.M. retained by

129 1 Repairing and Reconditioning of CF by 200 each ₹

welding the shaft portion & making the

shaft as per bearing size by grinding and

putting it into working order

130 1 Exide Xpress xp 130Ah 12 v 17350 each ₹