Providing Lift water supply scheme to Panchrukhi adjoining in Palam area under Jasinghpur in Tehsil Palampur Distt. Kangra HP SH, C,O Meeting Hall for Beneficiaries Accomodation for staff, J.E. Project Implementation Office

Amount

Excavation for foundation, trenches, etc., in all types of soil such as pick work, jumper work, blasting work, kankar, moorum, singles, including decomposed soft and hard rock; including chiseling, wedging, clearance of bushes, etc.; including necessary shoring, dewatering, etc., with all leads and lifts. Excavated soil shall be stacked not more than 3 meters clear from the edge of excavation and, when required, the stacked soil shall be returned in 15 cm layers into plinth and sides of foundation, consolidating each deposited layer by ramming and watering. Disposal of all surplus earth shall be done within all leads and lifts as directed by the Engineer-in-charge, completing the work to entire satisfaction. (PJ)

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete within all leads and lifts complete as per the direction of Engineer-In-Charge

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material in all leads & lifts..

Foundation, footings basis of columns etc. and mass concrete complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Flat surfaces such as soffits & suspended floors,roofs and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Columns, pillars, post and struts Square, rectangular or polygonal in plan complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Stair cases with sloping or stepped soffits excluding landing complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Vertical fins and vertical sun breaker

Providing & Laying cement concrete 1:4:8 ( 1 cement :4 approved sand :8 approved graded stone aggregate 40mm nominal size ) & curing complete excluding the cost of form work in foundation and plinth as per direction of Engineer-in-Charge with in all leads and lifts.

Providing & Laying cement concrete 1:3:6 ( 1 cement :3 approved sand :6 approved graded stone aggregate 40mm nominal size ) & curing complete excluding the cost of form work in foundation and plinth as per direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying cement concrete work 1:1/1/2:3 (1 cement: 1/1/2 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in.

Foundation footing bases of columns etc.and like the mass concrete as per direction of Engineer-in-Charge with in all leads and lifts.

Suspended floor roofs,landing and shelves and their support balconies,beams,girders,bressumers and cantilever upto floor two level as per direction of Engineer-in-Charge with in all leads and lifts.

Columns pillars posts and struts upto floor two level. as per direction of Engineer-in-Charge with in all leads and lifts.

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level. as per direction of Engineer-in-Charge with in all leads and lifts.

Lintels, beams girders bressumers and cantilevers upto floor two level.as per direction of Engineer-in-Charge with in all leads and lifts.

Walls including attached buttresses, pilasters and their caps and bases string courses etc. upto floor two level including carriage of material within all leads & lifts.

Vertical fins and vertical sun breaker

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material in all leads & lifts

2nd class brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

2nd class Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4 (1 Cement : 4 Sand) including carriage of materials in all leads & lifts.

Providing wood work of Deodar wood 1st class in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws II class Deodar Wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class Deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing M.S. Grill including carriage of materials in all leads & lifts. As per direction of Engineer-in-charge.

6 mm thick cement plaster to ceiling in C.M.1:3 (1Cement,3 sand) with in all leads and lifts complete in all respect.

20 mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:4 including carriage of material in all leads & lifts.

15 mm Cement plaster in single coat on fair side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.

Stone soling/boulder filling dry hand packed in under floor as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals.

Kota stone slab flooring 25 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete including carriage of material in all leads & lifts. (13540200) 30 mm thick Porch floor

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick(stairs steps)

Providing and fixing 10mm thick antiskid/polished water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivalant 600x120mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) ointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts. (13680000)(fixed with 5mm spacer,filled with epoxy) (Toilet Floor)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size 600x600mm

White glazed tiles 9 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.(13210000).(size of tile=30x45cms(toilet walls)

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board (approved make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.(1218000000).(centuary/virgo/green make)

Providing and fixing 19mm thick water proof commercial board in shutter of cub board (approved make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.(1218000000).Centuary/virgo/green make)

Providing and fixing 6mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.

Providing and fixing stainless steel leg stands for base of cabinets 7x7cms and 10 cms high,fixed with screws

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts.(1218200000). .

Providing and fixing bright finished Brass sliding door-bolts with nuts and screws etc. complete in all respect including carriage of material in all leads & lifts.

Providing fixing bright finished Brass tower bolts (barrel type) with screws etc. complete. in all respect including carriage of material in all leads & lifts.

Providing and fixing bright finished Brass handles for doors with screws etc. complete. in all respect including carriage of material in all leads & lifts

Providing and fixing bright finished hard drawn hooks and eyes complete in all respect including carriage of material in all leads & lifts. (1212204000) 150 mm

P/F bright finished brass mortise lock with all acessories complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

P/F Heavy duty hydraulic door closer with all acessories complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 40x3mm flat iron hold fast 40 cm.long including fixing to frame with 10mm diameter bolts,nuts and wooden plug and embedding in cement concrete block 30x10x15cm of 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size)complete in all respect including carriage of material in all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In MS hollow square/rectangluer pipes (tata make)beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges .

Providing under layer for plinth protection 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominalsize) complete in all respect including carriage of material in all leads and lifts

P/F M.S.BP Sheet 1.66 mm to 2mm thick TATA MAKE in eves board/facia/soffits/celing including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in -Charge ( Base member of steel work shall be measured & paid separtely)

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm th. Sheet

Providing and fixing on wall face PVC (D-Plast) rain water pipes with accessories of working pressures not less than 4.5 kg/Sqm i/c filling the joints with approved adhesive complete. (100mm dia pipes)

Providing and fixing KITEC pipe Holding Clamps with brass plate of approved design with steel screws and rawal plugs etc. complete.

Providing and Fixing Steel Hollow Square pipe (0.90 Mtr. Height) in straight length fixed with stainless steel flat/flat round at top and vertical and horizontal balusters including fixing with necessary scerws complete as per the Direction of Engineer-in-charge.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of nominal and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete in all respect including carriage of material in all leads & lifts

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts (16105000).

Polishing two coats with PU(poly utherene) polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect including carriage of material in all leads & lifts.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.complete including carriage of material in all leads & lifts Readymixed paint brushing with pink for priming

Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint

Providing and fixing 200mm wide CI rungs in all leads & lifts and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing man hole cover with frame having frames size of 560mm internal dia, including carriage of materials within all leads and lifts.

Providing and fixing vent opening including cowl with mesh in the top of the tank including carriage of all leads and lifts and as per the direction of the Engineer-in-charge.

Providing and fixing white vitreous china wash down water closet (European type W.C.pan) with integral 'P'or 'S' trap including jointing the tap with soil pipe in CM 1:1 ( seat and cover to be measured and paid for seperately)

Anglo Indian Universal Closet complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 10/12.50/15 liters vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve with polythene float C.P brass handle, unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing plasic seat(solid/Hollow type) and cover for wash down water closet with C.P. brass and hinges and rubber buffers solid type White plastic seat complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing china wash basin with singl hole for pillar trap with C.I. or M.S. brackets painted whie including cutting holes and making good the same with excluding fitting fla back 630mm x450mm complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing china pedestal for wash basin complete recessed at rhe black for the reception of pipes and fittings complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 600mm x450mm beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood and fixed to wooden plugs with C.P. brass screws the washers complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing C.P. brass towel rail complete with CP brass brackets fixed to wooden plugs with C.P. brass 600x20mm complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 600x120mm glass shelf with C.P. brass brackes and guard rail complete fixed on wooden plugs with C.P.brass screws complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with CP brass screws complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 15mm dia C.P. brass pillar tap with capstan head complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing C.P. brass bib tap with capstain head 15mm dia complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing C.P. brass angle cock 15mm dia without nuts and pipe complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing PVC connection pipe with unions 45cm. Long and 15mm.nominal bore complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing brass full way valve with wheel 15mm dia without nuts and pipe complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 15 mm dia

ii) 20mm dia

Providing and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC single equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC double equal branch with oval access door insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc.

i) 75mm nominal size

ii) 100mm nominal size

Providing and fixing PVC Collars ISI Marked including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75 mm nominal size

ii) 100mm nominal size

Providing and fixing PVC Plain bend ISI Mark including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75mm nominal size

ii) 100mm nominal size

Providing and fixing PVC Cowl including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75mm nominal size

ii) 100mm nominal size

Providing and fixing stone ware gully trap grade-A complete with C.I. grating brick masonry chamber in cement mortar 1:5 ( 1 cement: 5 sand) C.I. cover with frame 300x300mm size wt. of cover should not be less than 4.53 kg. and frame 2.72 kg complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floor complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

15 mm nominal bore.

20 mm nominal bore.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 75mm nominal size

ii) 100mm dia nominal size.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in and including cement concrete blocks 10x10x10cm. Of 1:2:4 (1 cement : 2 sand : 4 stone graded stone aggregate 20mm nominal size) and cost of cuting holes and making good the wall etc. 100mm diameter for C.I. pipe complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

75mm dia meter

100mm dia meter

Providing and fixing 75mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and placing water tank of make sintex having of capacity of 2000 ltr. With necessary fittings including over flow pipe etc. and ball valve with cover and locking arrangements including make of required size for inlet and outlet and inside paint in of good quality complete including hoisting complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 100mm sand C.P. grating for gully floor complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing CP brass Jet with connection pipe and other fitting for (European Type) WC pan complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing high pressure PVC pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

i) 150mm nominal size

Providing and fixing bowl pattern urinal URS -WHT-0704 without sensor size 710x485x300mm and Senser SNR-CHR-51097 Sensotronic sensor flushing valve for urinal with complete kit suitable for urinal URS -WHT-0704 of Jaquar make i/c connection the urinal with based pipe by means of flat back type white lead mixed with chopped hemp ( waste pipe to be measured & paid for separetly ) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing automatic flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such CI syphonic apparatus mosquitos proof ld CP brass union , unions and couplings for connecting with inlet, outlet and overflow pipes 40mm dia. C.P flush bend including cutting holes in walls and making good the same and connecting the flush pipe with cistern and closet ( over flow pipe to be measured and paid for separately ) 10.00 liters. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing Division plate for urinals 700x340x120mm vitreous china complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of KENT supreme RO UV UF Mineral purifier with storage tank capacity of 15 Ltr. To give user clean And safe drinking water with higher concentration through film tech 1812-75 GPD and the purification capacity tested on ra water shall be with TDS level of 750 PPM. The UV lamp shall be 11 watt the main filter used in this water purifier shall be sediment activated carbon, post carbon and carbon block including all accessories including installation charges with six month warranty as per the direction of Engineer-n-charges

Providing and fixing water cooler Usha 20 ltr. Stainless steel 2020-SS water cooleer (ISI Marked). The cooler shall be desined for grater safty and operational conveniuns, having low power consumption and the quality of grooved copper tubes and having high effeciency compressor, blue fins on condencer coil give the cooler a long life. it must be enviorment frendly and new age refrigant. the body material must be rugged stainless steel/galvanised steel with float valve, adjustable padestal and other cpmponents complete including installation at site as per the direction of the Engineer-in-Charge.

Providing and fixing Kitchen Stainless Sink Grade 304 complete including installation at site as per the direction of the Engineer-in-Charge.

Providing and fixing SS square Overhead Shower with shower arm complete in all respect.

Providing and fixing set of high flow divertor vignette prime series with ALD-CHR-079 concealed body for single lever high flow divertor with button assembly , cartridge sleeve with VGP-81079K single lever exposed parts kit of Hi-Flow divertor consisting of operating lever wall flange (with seals) & button only (suitable for item ALD-CHR-079) and spout jet SPJ-81463 vignette prime bath tub spout with button attachment for hand shower with wall flange complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

2 modules (81mmx78mmx50mm)

3 modules (102mmx78mmx50mm)

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing wire from MCB box to main pannel board complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

S.P. 5/6 amps, one way switch, piano type ISI marked

S.P. 5/6 amps, two way switch, piano type ISI marked

S.P. 15/16 amps, one way switch, piano type ISI marked

3 pin 5/6 amps socket outlet, piano type ISI marked

6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Bell push, Modular.

Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, rmoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 10 Liter capacity water heater (Cat-A) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing and fixing 2 x36 watt-LED (Category-A) of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CLED (but excluding the cost of CFLED), complete with all accessories, connections, testing and commissioning etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A) complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x20W LED coplete in all respect complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing LED BULBS 11 watt suitable for D.C./A.C. single phase,230 volts complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing bakelite batten/angle holder including connections etc. as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of integral LED Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CLED 22 watt. complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of INTERCOME exchange of reputed brand having 10 connections with sets complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of split type air conditioner having two stars features auto clean filter four wayu swing all copper pipes including making provision of draining of back moisture water through GI pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

1.50 Tonne capacity

2.00 Tonne Capacity

Supplying and fixing of Refrigerator Double Door 563 ltr capacity of reputed makeomplete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Supplying and fixing of Microwave 28ltr of reputed make with all accessories complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Supplying and fixing of washing machine fully automatic front load 10kg of reputed make complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Provision for Resurvey and soil bearing capacity complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

Provision for Structural drawing and Detailed Architectural Drawing complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge

GANTANTAR THAKUR (BID ID -551414)

Gagandeep Singh Govt Contractor (BID ID -551328)

Hitesh Gupta (BID ID -551793)

gagan ohri (BID ID -550826)

PARVEEN KATNA (BID ID -552029)