REPAIR AND MAINTENANCE OF WATER SUPPLY EQUIPTMENTS UNDER GE DEHU ROAD.

Amount

Disconnecting /dismantling /taking out the defective burnt out VT pump set (Moter/Pump) from jack well and transporting to shop including loading/unloading etc complete and reffixing again after necessary repair work of capacity 30/60 HP Vertical motor. The repair includes followings a) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unservicable parts as required and directed. b) Reassembling the complete pump set and re-erection and re-installation at its original position as directed c) Testing and commissioning complete all as directed by Engr-in-Charge. Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A 2) All new parts required will be measured and paid separately as supply only items. 3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete. 4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquanted with site conditions complete. 5)T&P , Transport etc incl in quated rate . 6) Location :Keniya Pump House and A-I Pump House

Supply for repair suction case bearing for 30 HP VT Pump set of Capacity 30 HP.Make:Joyti

Supply for repair suction case bearing for 60 HP VT Pump set of Capacity 30 HP.Make:Joyti

Supply for repair Impeller seal ring of Capacity 30 HP.Make:Joyti

Supply for repair Impeller seal ring of Capacity 60 HP.Make:Joyti

Supply for repair bowl bearing of Capacity 30 HP.Make:Joyti

Supply for repair Bowl Bearing of Capacity 60 HP.Make:Joyti

Supply for repair Bowl studs (SS) of Capacity 30 HP.Make:Joyti

Supply for repair Bowl studs (SS) of Capacity 60 HP.Make:Joyti

Supply for repair Line shaft coupling (SS) of Capacity 30 HP.Make:Joyti

Supply for repair Line shaft coupling (SS) of Capacity 60 HP.Make:Joyti

Suppy for repair Bearing holder assembly of Capacity 30 HP.Make:Joyti

Supply for repair Bearing holder assembly of Capacity 60 HP.Make:Joyti

Supply for repair Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Joyti

Supply for repair Line shaft Bearing (Throdan type) of Capacity 60 HP.Make:Joyti

Supply for repair Column studs /nut bolts (50 Nos) of Capacity 30/60 HP.Make:Joyti

Supply for repair Stuffing box bush of Capacity 30 HP.Make:Joyti

Supply for repair Stuffing box bush of Capacity 60 HP.Make:Joyti

Supply for repair Latern Ring of Capacity 30/60 HP.Make:Joyti

Supply for repair Water deflector of Capacity 30/60 HP.Make:Joyti

Supply for repair Head shaft coupling of Capacity 30 HP.Make:Joyti

Supply for repair Head shaft coupling of Capacity 60 HP.Make:Joyti

Supply for repair Column pipe 150 mm of Capacity 30/60 HP.Make:Joyti

Supply for repair Impeller adjusting nut with screw of Capacity 30/60 HP.Make:Joyti

Supply for repair Impeller made out of MS with impeller key 30/60 HP complete all as directed

Supply for repair Strainer Assembly of Capacity 30/60 HP.Make:Joyti

Supply for repair Bowl of Capacity 30 HP.Make:Joyti

Supply for repair Bowl of Capacity 60 HP.Make:Joyti

Supply for repair Impeller shaft of Capacity 30 HP.Make:Joyti

Supply for repair Impeller shaft of Capacity 60 HP.Make:Joyti

Supply for repair Impeller collect assemly of Capacity 30/60 HP.Make:Joyti

Supply for repair Line shaft up to 1.5 mtr and replacement of the Line shaft coupling complete all as directed

Supply for repair NDE Bearing No 6307/C3 suitable for 30/60 HP Make SKF OR equivalent

Supply for repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30/60 HP.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 120 LPS with head 100 mtr, motor capacity150 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Location: Keniya Pump House. Note:(i) Spare parts for repair/replace will measured in respective items as per site required

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Coupling Key Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Impeller SSuitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bolt for upper and lower half casing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitable for DSM 150/46 ,Kirloskar

Supply Draing plug for casing suitablefor 15 HP pump . Suitable for DSM 150/46 ,Kirloskar

Supply Paper packing between lower and upper casing Key Suitable for pump set Model no DSM 150/46

Supply O ring for shast sleev Suitable for pump set suitable for Model no DSM 150/46 ,Kirloskar

Supply Wear Ring suitable for Pump set Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shoulder Ring in CI Suitable for pump set Model no DSM 150/46 150 HP

Supply Interstage Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Lantern Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE ball bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE Bearing Cover Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cartridge for bearing, DE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply NDE Bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing Cap Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing nut,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply stuffing box bush,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Hex screw for bearing cover,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cylindrical pin,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland Packing,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Vent Valve,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Flexible ST Hose Pipe,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Kirloskar

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP Pump Make=Kirloskar.Model No RKB-100/23E35. Location: Keniya Pump House

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar.

Supply Coupling Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Impeller SSuitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bolt for upper and lower half casing sSuitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor Model no- RKB-100/23E35,Make-Kirloskar.

Supply Draing plug for casing suitablefor 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Paper packing between lower and upper casing Key Suitable for pump setModel no- RKB-100/23E35,Make-Kirloskar.

Supply O ring for shast sleev Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Wear Ring suitable for Pump set Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shoulder Ring in CI Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Interstage Ring Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply DE ball bearing Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply DE Bearing Cover Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cartridge for bearing, DE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply NDE Bearing Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply stuffing box bush,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Hex screw for bearing cover,Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cylindrical pin,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland Packing,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Vent Valve,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Flexible ST Hose Pipe,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP Pump Make=GRUNDFOS .Location :- Keniya Pump House.

Kit Chamber stack CRN155-4A,suitable for 75 HP centrifugal Pump,Make : Grand Force.

Mechanical Seal.uitable for 75 HP centrifugal Pump,Make : Grand Force.

Bulk Impeller 99262569,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Shaft 99196563,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit wear part,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit Bearing,uitable for 75 HP centrifugal Pump,Make : Grand Force.

AIR &AF Charges,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 34 LPS with head 60/75 mtr, motor capacity 60 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 80/36. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 75 mtr, motor capacity 60 HP Pump Make=Kirloskar .Location :- MIDC Pump House.

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36,Kirloskar

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36 ,Kirloskar

Supply Wear Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shoulder Ring in CI suitable for PUMP set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Interstage Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Lantern Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply DE Bearing s,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply NDE Bearing ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Deep Groove Ball bearing suitable for 60 HP,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply ANG Contact Ball bearing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Bearing Cover,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cover NDE,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Impeller,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Coupling,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Sleeve Nut,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve Nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Round Lock nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland Packing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Vent Valve,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Set of O Ring ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Flexible ST Hose Pipe,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Ms stud and including replacement of CI gland ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply stuffing box suitable for nut and bolts,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cooling PVC flexible of ,suitable for Model No DSM/80/36,Make: Kirloskar.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No Model No K1225 Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP Pump Make=Kirloskar .Location :- A-2 Pump House.

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model No K1225 Make : Kirloska

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model No K1225 Make : Kirloska

Supply Wear Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Shoulder Ring in CI suitable for PUMP set,suitable for Model No K1225 Make : Kirloskar

Supply Interstage Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Lantern Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Gland suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply DE Bearing suitable for Model No K1225 Make : Kirloskar

Supply NDE Bearing suitable for Model No K1225 Make : Kirloskar

Supply Deep Groove Ball bearing suitable for Model No K1225 Make : Kirloskar

Supply ANG Contact Ball bearing,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover NDE,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve suitable for Model No K1225 Make : Kirloskar

Supply Key for Impeller,suitable for Model No K1225 Make : Kirloskar

Supply Key for Sleeve Nut,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve Nut ,suitable for Model No K1225 Make : Kirloskar

Supply Round Lock nut,suitable for Model No K1225 Make : Kirloskar

Supply Gland Packing,suitable for Model No K1225 Make : Kirloskar

Supply Vent Valve,suitable for Model No K1225 Make : Kirloskar

Supply Set of O Ring ,suitable for Model No K1225 Make : Kirloskar

Supply Gland stuffing box suitable for nut and bolts suitable for Model No K1225 Make : Kirloskar

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP Pump Make=Kirloskaror equivalent.Location :- C-1 and C-2 Pump House,COD Depot,FAD Depot.

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump15/20 HP set Make : Kirloskar OR Equivalent

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set 15/20 HPMake : Kirloskar OR Equivalent

Supply Wear Ring suitable for Pump set,suitable for Pump 15/20 HP Make : Kirloskar OR Equivalent

Supply Shoulder Ring in CI suitable for PUMP set 15/20 HP,suitable for Make : Kirloskar OR Equivalent

Supply Interstage Ring suitable for Pump set 15/20 HP,suitable for Make : Kirloskar OR Equivalent

Pump shaft Suitable for pump set 15/20 HP for Make : Kirloskar OR Equivalent

DE/NDE Bearing No 6306 suitable for Make : Kirloskar OR Equivalent

Shaft bush for 15/20 HP Pump including removal from the pumps,Make : Kirloskar OR Equivalent

Shaft coupling flexible type KC 276 FOR 15/20 HP Cappacity in repair and removal from pumps Make : Kirloskar OR Equivalent

Star Nuts for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent

Impeller for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent

Impeller wear ring Model no KDS 15/20 HPMake : Kirloskar OR Equivalent

Bearing housing.Model no KDS 15/20 HP Make : Kirloskar OR Equivalent

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP Pump Make=Kirloskaror equivalent.Location :- COD Depot,FAD Depot.STP

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump15/20 HP set Make : Kirloskar OR Equivalent

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set 15/20 HPMake : Kirloskar OR Equivalent

Pump shaft Suitable for pump set 10 HP.Make : Kirloskar

DE/NDE Bearing of capacity 10 HP.Make : Kirloskar

Shaft bush for 10 HP Pump including removal from the pumps.Make : Kirloskar

Shaft coupling flexible type 10 HP Cappacity in repair and removal from pumps.Make : Kirloskar

Star Nuts for 10 HP Centrifugal pump Make : Kirloskar

Impeller for 10 HP Centrifugal pump.Make : Kirloskar

Mechanical Shaft seal for 10 HP Centrifugal pump .Make : Kirloskar

Disconnection the electric and pum connectio and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing and painting with two cote of synthetic eanamel paint,complete suitable for Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC supply. ( make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity 75/60 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity 15/20 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 187 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC supply ( make : kirlosker )

Disconnection the electric and lifting the submersible pump from river bed,well and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing complete suitable for Submersible motor with pump of capacity 15 HP 3 phase 415 Volt AC supply.

All as item no-194 here in before but capacity of submersible pump 10 HP

Taking down the Slip ring assy complete with studs made out of copper suitable for 150 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Slip ring assy complete with studs made out of copper suitable for 120 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Slip ring assy complete with studs made out of copper suitable for 60 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Carbon bush holder made of bronze suitable for 150 HP Capacity Motor and supply and fixing the same all as directed

Carbon brushes holder made of bronze as per existing sizes per sample suitable for 120 HP Capacity Motor

Carbon brushes holder made of bronze as per existing sizes per sample suitable for 60 HP Capacity Motor

Taking down the unserviceable Fan Blade upto 20 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 30 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 60 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 100-150 HP Motor and supply fixing the same.

S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30 HP.

Taking up the unserviceable cable of any type,and supply , laying and connecting with copper conductor including copper lugs in repair and PVC flexible pipes of suitable sizes of capacities from panel board to starter to motor for connection.Polycab PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS: 694:2010 of size 35 sqmm three core Make : Polycab,Finolex,Havells .

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .25 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .16 sqmm three core Make : Polycab,Finolex,Havells

Taking down the unserviceable MCCB from the existing panel ,supply and fixing Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 400 Amps TPN ,Make: Havells,Legrand ,Benlo

Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Fixed Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(25kA rms) MCCB 250 Amps TPN ,Make: Havells,Legrand,Benlo ,

Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Fixed Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(25kA rms) MCCB 200 Amps TPN ,Make: Havells,Legrand,Belno

Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Fixed Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 160 Amps TPN ,Make: Havells,Legrand,Benlo

Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 100 Amps TPN ,Make: Havells,Legrand,Benlo

Taking down the unserviceable Starter from the existing panel and Supply and Fixing FASD For 15 HP Squirrel cage Induction motor Make L&T C&S, Havells or equivalen

Taking down the unserviceable Starter from the existing panel and Supply and Fixing FASD For 30 HP Squirrel cage Induction motor Make L&T C&S, Havells or equivalen

Taking down the unserviceable Starter from the existing panel and Supply and Fixing FASD For 60 HP Squirrel cage Induction motor Make L&T C&S, Havells or equivalen

Taking down the unserviceable Starter from the existing panel andSupply and Fixing FASD For 125 HP Squirrel cage Induction motor Make L&T C&S, Havells or equivalen

Taking down the unserviceable Starter from the existing panel and MU-G 15 DOL Star-Delta Starter for 10 HP squrrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent

Taking down the unserviceable Starter from the existing panel and MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 16A contactor Make: L & T/C&S/Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 160A contactor Make: L & T/C&S/Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 100A contactor Make: L & T/C&S/Havells or equivalent

S&F in repair Single phase preventor as reqd on site fpr protection of starter complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Disconnections suction and discharge line connection,Diconnection coupling Engine and diesel pump of capacity 167 BHP diesel engine pump set,90 m head, . Lifting and removing pump and Engine form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 167 BHP diesel engine pump set,90 m head,Location :- Keniya Pump House.

Disconnections suction and discharge line connection,Diconnection coupling Engine and diesel pump of capacity 110 BHP diesel engine pump set,202 Cum/hr,90 mtr head. Lifting and removing pump and Engine form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 1110 BHP diesel engine pump set,202 Cum/hr,90 mtr head Location :- FAD-2 AREA.

Supply for repair Intake Adapters suitable for fire Pump

Supply for repair Intake and Discharge Fittings suitable for fire Pump

Supply for repair Crossover and Discharge Manifold Assembly suitable for fire Pump

Supply for repairPrimer Assembly Without PIV (Priming Isolation Valve) With PIV (Priming Isolation Valve) suitable for fire Pump

Supply for repair Body and Ipeller Shaft Assembly

Supply for repair Impeller Shaft and Pedestal Assembly suitable for fire Pump

Supply for repair RTP Foam System suitable for fire Pump

Supply for repair Mechanical Seal Replacement Kit suitable for fire Pump

Supply for repair Hex Hd Screw, M12-1.75 x 30 suitable for fire Pump

Supply for repair Lock Washer, 12 mm suitable for fire Pump

Supply for repair Wear Ring suitable for fire Pump

Supply for repair Gasket / Shim / O-ring Replacement Kit suitable for fire Pump

Supply for repair Lock Washer, 8 mm suitable for fire Pump

Supply for repair O-ring, 1-5/8 x 1-7/8 in.

Supply for repair Intake Adapter Subassembly suitable for fire Pump

Supply for repair Gasket / Shim / O-ring Replacement Kit suitable for fire Pump

Supply for repair Discharge Relief Valve Subassembly suitable for fire Pump

Supply for repair Volute Body Subassembly suitable for fire Pump

Supply for repair Mechanical Seal Replacement Kit suitable for fire Pump

Supply for repair Oil Seal Housing suitable for fire Pump

Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carring out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity

Supply for repair Bearing suitable 15 HP Blower.

Supply for repair Oil Seal uitable 15 HP Blower.

Supply for repair Oil Packing uitable 15 HP Blower.

Supply for repair Gear Hub uitable 15 HP Blower.

Supply for repair Gear Set uitable 15 HP Blower.

Supply for repairRotar Set uitable 15 HP Blower.

Maintanence the intake channel of water from river to Jack will and fire pump for smooth water comming in jack well in all time for smooth functioning the water supply installation. The cost including providing the JCB for cleaning the floating particals ans sand with slit complet all as directed.

Shri Sai Electricals (BID ID -3087546)

Om Sai Enterprises (BID ID -3086245)

Star Electrical (BID ID -3086476)

Crown Chemicals (BID ID -3094457)