ED/IIMC/NIT/1/26-27/42

Supply and Laying of PVC insulated 3.5C x 400 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( only 1 No. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 400 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( 3/4 Nos. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 400 sq.mm (XLPE) armoured, Cable.1.1Kv grade Laying of the cable will be minimum 600 mm below from the G.L and protection of the cable with sand and bricks etc.( work includes necessary road cutting and back filling as per site requirement). Makes : KEI/ POLYCAB/ FINOLEX ( 2/3 Nos. cable laying in one route)

Supply and Laying of PVC insulated 3.5C x 400 sq.mm (XLPE) armoured, Cable.1.1Kv grade . Cable laying in the existing cable trench or Hume pipe etc.Makes : KEI/ POLYCAB/ FINOLEX

Supply & installation State through joint of 3.5C X 400/300 sq mm (XLPE) cable including Jointing Kit ( Compound) make-3M and AL lugs, socket etc.

End Termination of 3.5C X 400/300 sq mm (XLPE) cable including Gland ( Double) make-comet and AL lugs, socket etc.

(For MDC- A2 power cable ) Supply , Installation , Testing & Commissioning of weather proof outdoor type Feeder pillar Aluminium painted made of 12 SWG MS powder coated with 2 nos. hinge type biparting door (at front and back side of feeder) The feeder pillar with dimension (Height – 1500 mm x W – 1250 mm x D – 800 mm) should consist of the following :- Fuse make- L&T/Havels/Siemens/Legrand. a) Bakelite sheet,20-25 mm thickness in adequate size = 1 set b) 50 mm x 6 mm, 600 A copper bus bar = 06 nos. c) 40 mm x 3 mm, 300 A copper bus bar = 02 nos. d) Porcelain fuse 200A ( KKRT) = 18 nos e) Porcelain fuse 400A ( KKRT) = 06 nos f) Iron angle frame with 6 nos. leg = 1 set. g) 40 mm x 6 mm copper busbar link for porcelain fuse h) Fabrication & painting of the feeder Pillar. i) Danger plate & name plate & suitable base plate. j) Phase Indicating lamp LED both In side . Installation of above feeder box with proper brick foundation & brick soiling from front side as well as back side of the feeder box and completely plastering. Job also includes making 2 nos. platform of PCC with brick flat soling each of area 450 mm x 1300 mm on both sides of the feeder piller (front & back side)

( For MDC A1 &A3 Power Cable) Supply, Installation, Testing & Commissioning of weather proof out door type Feeder Pillar Aluminum painted made of 12 SWG MS Sheet double hinged biparting door at front and back side feeder box. The feeder pillar with dimension (Height-1250mm x W-950 mm x D-600mm) should consist of the following:- a)Porcelain fuse 400A, Havells make - 3nos b)Porcelain fuse 200A, Havells make - 12 Nos. c)Porcelain fuse 100A, Havells make - 3 Nos. d)50 x 6mm 400A copper Bus Bar - 4 Nos. e)20mm thick adequate size Bakelite Plate -1 No f) Fabrication & Painting of the feeder box -1 No. g) Iron angle frame frame with 4-Nos. legs-1Set. h) Danger plate & suitable size base plate-1 Set. Job include:- Installation the said feeder piller on concreat /brick foundation. The foundation should be plastering and painted with black paint.

Earthing with GI earth pipe 4.5 Mtr. Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and etc. with charcol/coke and salt as required. Including Earthing Strip 50X6 as required.