Supply of Furniture for the Office of Scientific Research Boards 4th and 5th Floor at LASTEC, Western Wing, Metcalfe House Complex, Delhi

Amount

Executive Table 2400x1050x750 mm

Providing and placing of Senior Executive Table of size 3150x1050x750 mm made out of 19 mm thick water proof commercial block board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . Wherever 38 mm thick commercial board is required, it shall be , by joining two 19 mm thick boards. Edges of board to be covered with second class teak wood lipping of 4 mm thick and moulding of 25mm thick in second class teak wood on the edges of table top , 3 Nos of drawers running on S.S. telescopic channel of supreme quality and required size. All Drawers to have locking arrangement and handles of approved quality and design. Foot rest of second class teak wood of size 65 X 30 mm. All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete .

Side Rack of size 1050x525x750 mm made out of 19 mm thick water proof commercial block board covered with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface Edges of board to be covered with second teak wood class lipping of 4 mm thick . key board of size 525 X 400 mm and bottom portion to have space for C.P.U. drawer with telescopic channel of supreme quality and required size and open shelf with 3 Nos of drawers. Back to have 6 mm commercial ply with holes , and plugged with PVC hole cover for wiring , All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete Side Rack of size 1050x525x750 mm with 12 mm thick glass on table top with bavelled and polished edges as per aproved sample .

Supplying and placing in position Back Unit 1980 mm high made out of 19 mm thick water proof commercial board. All outer faces finished with 3.5 mm thick teak veneer of approved colour and quality. Edges of board shall be covered with teak wood lipping. The drawers to be provided with one lock, handles of approved quality and design. All exposed faces to be finished with melamine polish and other wooden faces to be finished with spirit polish etc all complete.

Providing and placing of work station of size 1350X600X 750 mm made out of 19 mm thick water proof commercial block board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . Wherever 38 mm thick commercial board is required, it shall be , by joining two 19 mm thick boards. Edges of board to be covered with second class teak wood lipping of 4 mm thick and moulding of 25mm thick in second class teak wood on the edges of table top . All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete with key board of size 525 X 400 mm and bottom portion to have space for C.P.U., 3 Nos drawers with telescopic channel of supreme quality of required size .

Providing and placing of wooden conference table for seating of 25 persons made in 17 Nos. parts or as approved in shape and size (1360mm(W)X600mm(D)X750mm(H)size of one part approximatly) as per approved design and drawing, necessary provision are for fixing mike and computer cables etc., Providing 2 Nos. of 6 amps socket and switch, all wiring for communication and power hidden under work top, Shelf for keeping file under work top, Conference table made out of 19 mm thick water proof commercial block board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . Wherever 38 mm thick commercial board is required, it shall be , by joining two 19 mm thick boards. Edges of board to be covered with second class teak wood lipping of 4 mm thick and moulding of 25mm thick in second class teak wood on the edges of table top , Foot rest of second class teak wood of size 65 X 30 mm. All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete .

Centre Table of following sizes made out of second class teak wood frame, side with 70 X 25 mm teak wood and 45 X 45 mm teak wood decorative legs as per approved design, including 20 X 20 mm teak wood moulding all exposed surfaces to be finished with melamine polish with two or more coats Of Size 600 X600 X 450 mm with 8mm thick bevelled edge glass top.

Providing and fixing / placing of 400 mm deep and low height ( 1200 mm approximate) filing cabinetry as per approved design and sample, fabricated with 19 mm thick water proof commercial block board in top, bottom, sides, shelves and shutters, 6 mm thick water proof commercial plywood at back. with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . , Locking arrangement in all shutters , Edges of board to be covered with second class teak wood lipping of 4 mm thick All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. all complete as per direction of Engineer-in-charge. ( elevation area to be measured ) .

Supplying and fixing wood cupboards fabricated out of 19mm thick water proof commercial board for sides, tops, bottom / base, shelves and partition and 6 thick mm commercial ply on back complete. The cupboard shutters will be 19 mm thick commercial board with 1.0 mm thick decorative lamination outside including IInd class 4 mm thick teak wood lipping / pvc lipping on edges including necessary screws and bright finished stainless steel piano hinges, 100 mm ss handles, magnetic door catchers, 75 mm locks with four levers etc complete hardware as per direction of Engineer-in-charge. The inside portion including back surface shall be laminated with 0.8 mm thick white lamination . shelves height should be from 300 mm to 400 mm and partition should be from 750 mm to 1000 mm all complete as per direction of Engineer-in-charge.

600 mm deep

300 mm deep

Extra for providing on telescopic channels in 600mm deep cupboard

Providing and fixing of low height Partition consisting of bare Aluminium box section frame of size 50X50X2 mm provided at 400 mm c/c in both directions. Frame shall be secured with the help of dash fasteners of approved brand and sample, in plumb and line, 12 mm thick waterproof plywood to be fixed on both side of frame with screws .with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . All exposed faces to be finished with melamine polish with two or more coats etc. all complete as per direction of Engineer-in-charge 100X20mm Teakwood moulding as per approval sample and shape shall be fixed on the edges of partition to cover the ends of plywood and aluminium frame. The partition rate include all material and labour including making hole and openings for electrical conduits and boxes, complete as per instruction of Engineer-in-Charge.(Free standing partition exposed on both sides).

Providing and fixing of 600mm deep workstation (minimum space for one person 600 dia 1200mm) made out of 18mm thick commercial block board having one side covered with 1mm thick decorative laminate and other side 0.8mm thick balancing laminate. Tope edge to have 30mm thickness (18mm ply + 12mm ply 100mm wide) and tope edge coverd with 30 x 10 mm thick teak wood moulding. top to be provided and fixed on gablends of size 600 X 725mm made out of 18mm thick ply with both side 0.8mm lamination all exposed edge to have teak wood lipping finished with sprit polish etc all complete as per Engineer-in-Charge.

Megha Infraventures Pvt Ltd

Arts & Interiors