08/T of 24-25 of AE/BESD

Amount

Dismantling of Takendown the 1.5 TR split type indoor & outdoor unit A.c Machine disconnecting refrigerant copper pipe, 5/8" suction line & 1/4" pipe joint takendown the disconnecting electrical connection and Submit the same to the concerned authority.

S & D of High- wall Split Air Conditioner having following specification: Cooling capacity not less than 5200 Watt Minimum ISEER - 3.5 to 3.99, BEE level • 2 Star (min) [ 1st July 22 to 31st December 2024 ] IS Compliance - IS-1391 Refrigerant R410A/R 32 Corrpresso‹r- Rotary/Scroll Evaporator & Condenser Coil - Copper Operating outdoor temperature - 50°C and above Power supply - 230V, 5OHz (+-tolerance as per applicable standard),as directed by E1C The scope of work is aIso includes supply of following. (i) Necessary refrigeration copper line with nitrite rubber insulation and warping tape - 3 mtr. (ii) Necessary 3/4 core copper cable (FRLS type- make. FinoIex/PoIycab/RR Kabel)- 3 mtr, and with 25A plug top with indicator. (Legrand/Crabtree/Schneider). {O.General / Mitsubishi Electris / Zamils).

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including Supply of required Refrigant, S&F of necessary fixing arrangement for indoor and 40x40x5 mm MS angle iron frame for outdoor unit (or arrangement recomended by Manufacturer), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of EIC

S & F of additional following items for length exceeding 3 mtr. For complete installation and commissioning of above AC machine. (1) Supply & Fixing of extra refrigerant pipe (as requisite dia) with nitrite rubber insulation and wrapping tape (each mtr Refrigerent pipe will include cost of 1 meter liquid pipe line and 1 mtr gas pipe line of required dia and other accessories as required)

S&F of additional following items for length exceeding 3 mtr. For complete installation and commissioning of above AC machine. (i) 2.5 sqmm, 3/4 core copper cable (FRLS type- make: Polycab/Finolex/RR-Kabel)

Supply and Laying Soft Drawn PVC Drain Pipe 19 mm dia with proper supports & brackets as per direction of EIC. (Make- Suprime/Oriplast)

Supply & Fixing 240 V, 25 A, Modular type starter (Brandapproved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Dismantling the existing main switch, change over switch, cables etc and submit the same to the concerned authority as per direction of EIC.

Supplying and fixing 415V, 125 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L &T/ Siemens/ Havells)

Supplying and fixing 415V, 125 A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make- L &T/ Siemens/ Havells)

Supply & Delivery of 4 core 70 Sq mm PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor Cables for Working Voltage up to 1100 Volts of following sizes. [ Make - Polycab/Gloster/RR ]

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 4 core 70 sq. mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 4 core 70 sq. mm.

MONALISA

Messrs HI- Q - ENTERPRISE