Loading
Loading…
Loading…
Tender Value
₹63.8 L
EMD Value
₹63,900
Closing Date
27 Mar 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
CHIEF OFFICER, BAVLA NAGARPALIKA,BAVLA
CONSTRUCTION OF BORE AT DIFFERENT DIFFERENT 3 PLACES OF BAVLA NAGARPALIKA AT BAVLA.(THIRD ATTEMPT)
284386
11 of 2025-26
Open
Civil Works
Ahmedabad
3 documents required · 3 mandatory
₹2,400
Yes
Chief Officer, Bavla Nagarpalika, Bavla.
₹63,900
Yes
9 Mar 2026
9 Mar 2026
9 Mar 2026
27 Mar 2026
9 Mar 2026
Name Of Work :CONSTRUCTION OF BORE AT DIFFERENT DIFFERENT 3 PLACES OF BAVLA
NAGARPALIKA AT BAVLA.
Schedule-B1 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At Ramnagar Water
Work at Bavla Nagarpalika
Sr. No. Description Quantity Unit Rate Amount
1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00
village site in all strata by mud flush direct rotary
Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-
2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)
2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00
following bore hole including assembling, joining,
lowering of housing casing strainer pipes and
other assemble item with gravel packing and
other assemble items with packing and clay ball
packing etc. (GWSSB-Mech-2022-23, It No-1.2
Annexure-A, Sec-A, Page-1)(2)550dia.bore hole
from 0.00 to 300mtrs.
3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
5 Supply of cement. 1.70 M.Ton. 6302.00
6 (a)cement sealling. 1.00 Job 6661.00
7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00
and 32 mm dia airline for development of each
water bearing Zones come across up to full depth
of Deep tubewell of size 200 mm/250 mm/300
mm dia for the tubewell upto 185 Mtr. deep
through suitable air compressor. The job is for
complete period of development. (Where water
level is very deep and 2/3rd submersion is not
achived.) * All the required accessories,
machineries etc for above job will have to be
provided by contractors (GWSSB-Mech-2022-23,
It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air
8 (B3)Development of tubewel: Development of 1.00 Job 27330.00
tubewell zone wise with 900 CFM/200 PSI air
compressor up to availability of sand free
discharge. The Air compressor should run
minimum for six hrs of upto availability of sand
free discharge. (GWSSB-Mech-2022-23, It No-29-
E, Sec-A, Page-17) Pipe and bore material
9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00
ERW MS pipes conforming to IS: 4270/2001 with
latest amendment. (b) 250 mm dia. (Minimum
(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)
10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26
having slot size as 6.75 cm x 6.35 cm x 1.59 mm
(including unloading of blank pipes from truck &
reloading slotted pipes into truck). (b) 250 mm
(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)
11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73
either side nuts & bolts of standard make &
suitable to 250 dia. Pipe. Size. 900mm X 100mm X
16 mm flat suitable for 250 mm dia. pipe.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10
either side nuts & bolts of standard make &
suitable to 100/125 dia. Pipe. Size. 450mm X
65mm X 10 mm flat suitable to 65/80 mm dia.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12
MS plate with 3 holes at equal distance on
circumference for nut bolts type locking
arrangement with nut bolts & lock nuts of
standard make etc. complete. (a) for 250 mm
ERW pipes.(Thickness of plate is minimum
mm for top also
(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,
14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48
length made from medium class pipe as per ISS
Suitable for 250 mm dia.
(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,
15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80
pipe size 200mm X 150 mm X 6 mm
(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)
16 Geohydrological ground water investigation (250 1.00 Job 14286.00
mm dia. Deep T/W with water sample)
(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-
17 Electro logging of bore hole 1.00 Job 18000.00
(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)
18 Chemical analysis charge of water sample 1.00 Job 300.00
19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00
means of mud pump. (GWSSB-Mech-2022-23, It
No-1.5, Sec-A, Page-1)
20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00
(i) Electric motor driven Borewell submersible
pump set conforming to I.S. 8034 and motor
conforms to IS-9283 working at 3 phase 400/440
volt 50 C/S A.C. supply & 2900 R.P.M.
(ii) cat No 8.5 , Discharge in LPM 800 , Head in
mtr 198 , Mini Motor HP
((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-
21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00
415 V suitable for local & remote pump control
application consisting of incomer MCCB of
suitable rating, semi conductor fuses,
microprocessor based soft starter with built in by
pass arrangement (conforming to IS/ IEC 60947-4-
1-2-3) with RS 485 communication port, external
display unit with keypad including temperature
scanner with minimum 10 channels - suitable for
accepting RTD (Pt 100) /
thermister inputs, digital MFM with RS
communication port, analogue type ammeter with
selector switch, run hour meter, required
protective relays & control accessories. MP based
soft starter 100 HP (ATS)
(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)
22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00
detailed technical specifications of R/C of GWSSB
conforming to IS 694, IEC 60227 / 60228. 1 R x
(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-
23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00
column pipe as per
IS: 1239 part I with latest amendment. (Rates are
exclusive of GST) Length: 3 Mtrs.
(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-
24 Lowering of three phase submersible pump set 1.00 Job 2000.00
complete with required size & length of column /
HDPE pipes erected by means of proper chain
pully block and pipe wrenches after checking of
threads of each pipe and coupling to take the load
of the pump set and pipe assembly filled with
B) From 90 to 150 meter depth
(SOR 2022-23, Section E, Page No. 92, Item No.
25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10
S plate with 03 holes on either side with nuts &
bolts of standard make and suitable size of
following size.(450 mm x 65 mm x 10 mm flat
suitable to 80 mm dia. Column pipe. ) (SOR 2022-
23, Section B, Page No. 21, Item No. 1 C)
26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00
Sluice Valves as per IS:14846 (Latest Edition) of
following class and diameter including all taxes,
insurance, transportation, freight charges, octroi,
inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc.
PN-1 With hand wheel /cap operated (PD type
short body) 80 mm (Civil SOR 2022-23,Pg.-21,
Section A, Item No. 13.1.A3 Labour Pg.-21, Section
B, Item No.15 A )
27 Design, Supply, Installation, Testing, 1.00 No 1686.00
Commissioning of Bourdon Type Pressure Gauge,
±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304
Case with Bayonet Type Bezel, SS316 L Bourdon
Tube, SS 316 Movement material, Aluminium dial
with black graduation on white background,
Micro Zero adjustable pointer, neoprene gasket,
Blow out disc, shatter proof glass, SS tag plate etc
100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-
23Sec.F I No 10.1 a Page.No. 138)
Total ( B1 ) :-
Schedule-B2 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At ShreeNagar at Bavla
Sr. No. Description Quantity Unit Rate Amount
1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00
village site in all strata by mud flush direct rotary
Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-
2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)
2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00
following bore hole including assembling, joining,
lowering of housing casing strainer pipes and
other assemble item with gravel packing and
other assemble items with packing and clay ball
packing etc. (GWSSB-Mech-2022-23, It No-1.2
Annexure-A, Sec-A, Page-1)(2)550dia.bore hole
from 0.00 to 300mtrs.
3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
5 Supply of cement. 1.70 M.Ton. 6302.00
6 (a)cement sealling. 1.00 Job 6661.00
7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00
and 32 mm dia airline for development of each
water bearing Zones come across up to full depth
of Deep tubewell of size 200 mm/250 mm/300
mm dia for the tubewell upto 185 Mtr. deep
through suitable air compressor. The job is for
complete period of development. (Where water
level is very deep and 2/3rd submersion is not
achived.) * All the required accessories,
machineries etc for above job will have to be
provided by contractors (GWSSB-Mech-2022-23,
It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air
8 (B3)Development of tubewel: Development of 1.00 Job 27330.00
tubewell zone wise with 900 CFM/200 PSI air
compressor up to availability of sand free
discharge. The Air compressor should run
minimum for six hrs of upto availability of sand
free discharge. (GWSSB-Mech-2022-23, It No-29-
E, Sec-A, Page-17) Pipe and bore material
9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00
ERW MS pipes conforming to IS: 4270/2001 with
latest amendment. (b) 250 mm dia. (Minimum
(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)
10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26
having slot size as 6.75 cm x 6.35 cm x 1.59 mm
(including unloading of blank pipes from truck &
reloading slotted pipes into truck). (b) 250 mm
(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)
11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73
either side nuts & bolts of standard make &
suitable to 250 dia. Pipe. Size. 900mm X 100mm X
16 mm flat suitable for 250 mm dia. pipe.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10
either side nuts & bolts of standard make &
suitable to 100/125 dia. Pipe. Size. 450mm X
65mm X 10 mm flat suitable to 65/80 mm dia.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12
MS plate with 3 holes at equal distance on
circumference for nut bolts type locking
arrangement with nut bolts & lock nuts of
standard make etc. complete. (a) for 250 mm
ERW pipes.(Thickness of plate is minimum
mm for top also
(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,
14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48
length made from medium class pipe as per ISS
Suitable for 250 mm dia.
(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,
15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80
pipe size 200mm X 150 mm X 6 mm
(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)
16 Geohydrological ground water investigation (250 1.00 Job 14286.00
mm dia. Deep T/W with water sample)
(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-
17 Electro logging of bore hole 1.00 Job 18000.00
(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)
18 Chemical analysis charge of water sample 1.00 Job 300.00
19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00
means of mud pump. (GWSSB-Mech-2022-23, It
No-1.5, Sec-A, Page-1)
20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00
(i) Electric motor driven Borewell submersible
pump set conforming to I.S. 8034 and motor
conforms to IS-9283 working at 3 phase 400/440
volt 50 C/S A.C. supply & 2900 R.P.M.
(ii) cat No 8.5 , Discharge in LPM 800 , Head in
mtr 198 , Mini Motor HP
((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-
21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00
415 V suitable for local & remote pump control
application consisting of incomer MCCB of
suitable rating, semi conductor fuses,
microprocessor based soft starter with built in by
pass arrangement (conforming to IS/ IEC 60947-4-
1-2-3) with RS 485 communication port, external
display unit with keypad including temperature
scanner with minimum 10 channels - suitable for
accepting RTD (Pt 100) /
thermister inputs, digital MFM with RS
communication port, analogue type ammeter with
selector switch, run hour meter, required
protective relays & control accessories. MP based
soft starter 100 HP (ATS)
(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)
22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00
detailed technical specifications of R/C of GWSSB
conforming to IS 694, IEC 60227 / 60228. 1 R x
(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-
23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00
column pipe as per
IS: 1239 part I with latest amendment. (Rates are
exclusive of GST) Length: 3 Mtrs.
(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-
24 Lowering of three phase submersible pump set 1.00 Job 2000.00
complete with required size & length of column /
HDPE pipes erected by means of proper chain
pully block and pipe wrenches after checking of
threads of each pipe and coupling to take the load
of the pump set and pipe assembly filled with
B) From 90 to 150 meter depth
(SOR 2022-23, Section E, Page No. 92, Item No.
25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10
S plate with 03 holes on either side with nuts &
bolts of standard make and suitable size of
following size.(450 mm x 65 mm x 10 mm flat
suitable to 80 mm dia. Column pipe. ) (SOR 2022-
23, Section B, Page No. 21, Item No. 1 C)
26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00
Sluice Valves as per IS:14846 (Latest Edition) of
following class and diameter including all taxes,
insurance, transportation, freight charges, octroi,
inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc.
PN-1 With hand wheel /cap operated (PD type
short body) 80 mm (Civil SOR 2022-23,Pg.-21,
Section A, Item No. 13.1.A3 Labour Pg.-21, Section
B, Item No.15 A )
27 Design, Supply, Installation, Testing, 1.00 No 1686.00
Commissioning of Bourdon Type Pressure Gauge,
±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304
Case with Bayonet Type Bezel, SS316 L Bourdon
Tube, SS 316 Movement material, Aluminium dial
with black graduation on white background,
Micro Zero adjustable pointer, neoprene gasket,
Blow out disc, shatter proof glass, SS tag plate etc
100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-
23Sec.F I No 10.1 a Page.No. 138)
Total ( B2 ) :-
Schedule-B3 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At Town Hall at Bavla
Sr. No. Description Quantity Unit Rate Amount
1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00
village site in all strata by mud flush direct rotary
Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-
2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)
2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00
following bore hole including assembling, joining,
lowering of housing casing strainer pipes and
other assemble item with gravel packing and
other assemble items with packing and clay ball
packing etc. (GWSSB-Mech-2022-23, It No-1.2
Annexure-A, Sec-A, Page-1)(2)550dia.bore hole
from 0.00 to 300mtrs.
3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00
(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-
5 Supply of cement. 1.70 M.Ton. 6302.00
6 (a)cement sealling. 1.00 Job 6661.00
7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00
and 32 mm dia airline for development of each
water bearing Zones come across up to full depth
of Deep tubewell of size 200 mm/250 mm/300
mm dia for the tubewell upto 185 Mtr. deep
through suitable air compressor. The job is for
complete period of development. (Where water
level is very deep and 2/3rd submersion is not
achived.) * All the required accessories,
machineries etc for above job will have to be
provided by contractors (GWSSB-Mech-2022-23,
It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air
8 (B3)Development of tubewel: Development of 1.00 Job 27330.00
tubewell zone wise with 900 CFM/200 PSI air
compressor up to availability of sand free
discharge. The Air compressor should run
minimum for six hrs of upto availability of sand
free discharge. (GWSSB-Mech-2022-23, It No-29-
E, Sec-A, Page-17) Pipe and bore material
9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00
ERW MS pipes conforming to IS: 4270/2001 with
latest amendment. (b) 250 mm dia. (Minimum
(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)
10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26
having slot size as 6.75 cm x 6.35 cm x 1.59 mm
(including unloading of blank pipes from truck &
reloading slotted pipes into truck). (b) 250 mm
(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)
11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73
either side nuts & bolts of standard make &
suitable to 250 dia. Pipe. Size. 900mm X 100mm X
16 mm flat suitable for 250 mm dia. pipe.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10
either side nuts & bolts of standard make &
suitable to 100/125 dia. Pipe. Size. 450mm X
65mm X 10 mm flat suitable to 65/80 mm dia.
(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)
13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12
MS plate with 3 holes at equal distance on
circumference for nut bolts type locking
arrangement with nut bolts & lock nuts of
standard make etc. complete. (a) for 250 mm
ERW pipes.(Thickness of plate is minimum
mm for top also
(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,
14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48
length made from medium class pipe as per ISS
Suitable for 250 mm dia.
(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,
15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80
pipe size 200mm X 150 mm X 6 mm
(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)
16 Geohydrological ground water investigation (250 1.00 Job 14286.00
mm dia. Deep T/W with water sample)
(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-
17 Electro logging of bore hole 1.00 Job 18000.00
(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)
18 Chemical analysis charge of water sample 1.00 Job 300.00
19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00
means of mud pump. (GWSSB-Mech-2022-23, It
No-1.5, Sec-A, Page-1)
20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00
(i) Electric motor driven Borewell submersible
pump set conforming to I.S. 8034 and motor
conforms to IS-9283 working at 3 phase 400/440
volt 50 C/S A.C. supply & 2900 R.P.M.
(ii) cat No 8.5 , Discharge in LPM 800 , Head in
mtr 198 , Mini Motor HP
((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-
21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00
415 V suitable for local & remote pump control
application consisting of incomer MCCB of
suitable rating, semi conductor fuses,
microprocessor based soft starter with built in by
pass arrangement (conforming to IS/ IEC 60947-4-
1-2-3) with RS 485 communication port, external
display unit with keypad including temperature
scanner with minimum 10 channels - suitable for
accepting RTD (Pt 100) /
thermister inputs, digital MFM with RS
communication port, analogue type ammeter with
selector switch, run hour meter, required
protective relays & control accessories. MP based
soft starter 100 HP (ATS)
(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)
22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00
detailed technical specifications of R/C of GWSSB
conforming to IS 694, IEC 60227 / 60228. 1 R x
(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-
23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00
column pipe as per
IS: 1239 part I with latest amendment. (Rates are
exclusive of GST) Length: 3 Mtrs.
(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-
24 Lowering of three phase submersible pump set 1.00 Job 2000.00
complete with required size & length of column /
HDPE pipes erected by means of proper chain
pully block and pipe wrenches after checking of
threads of each pipe and coupling to take the load
of the pump set and pipe assembly filled with
B) From 90 to 150 meter depth
(SOR 2022-23, Section E, Page No. 92, Item No.
25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10
S plate with 03 holes on either side with nuts &
bolts of standard make and suitable size of
following size.(450 mm x 65 mm x 10 mm flat
suitable to 80 mm dia. Column pipe. ) (SOR 2022-
23, Section B, Page No. 21, Item No. 1 C)
26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00
Sluice Valves as per IS:14846 (Latest Edition) of
following class and diameter including all taxes,
insurance, transportation, freight charges, octroi,
inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc.
PN-1 With hand wheel /cap operated (PD type
short body) 80 mm (Civil SOR 2022-23,Pg.-21,
Section A, Item No. 13.1.A3 Labour Pg.-21, Section
B, Item No.15 A )
27 Design, Supply, Installation, Testing, 1.00 No 1686.00
Commissioning of Bourdon Type Pressure Gauge,
±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304
Case with Bayonet Type Bezel, SS316 L Bourdon
Tube, SS 316 Movement material, Aluminium dial
with black graduation on white background,
Micro Zero adjustable pointer, neoprene gasket,
Blow out disc, shatter proof glass, SS tag plate etc
100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-
23Sec.F I No 10.1 a Page.No. 138)
Total ( B3 ) :-
Total ( B1 to B3) :-
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.SBD-Tender Document-r.pdf
2.SPECIFICATIONS-Tender Document-.pdf
3.SCHEDULE-B Tender Document-.pdf
Download all tender documents and submit your bid