Loading
Loading…
Loading…
Tender Value
₹60.5 L
EMD Value
₹1.2 L
Closing Date
9 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: Tadipatri - Provision of Electrical Arrangements for the Proposed construction of SSE/P.way office along with stores.
GTL-EM-81-2025-26
GTL-EM-81-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.2 L
9 Apr 2026
18 Mar 2026
26 Mar 2026
155 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 60,46,623.63 | ||
| — | Item Breakup | for details. | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 10,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 11,854 | |
| — | Item Breakup | for details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 72,960 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 19mm size rigid conduit pipes of 2mm thickness PVC pipe (ISI mark) concealed in wall with all required accessories conforming to IS 9537.3.1983 including masonry work and labour charges etc (For wiring points and wiring to switch boards) along with accessories ( bends, elbow, deep junction boxes(3 way, 4 Way) etc | — | — | — | 11,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of 32mm x 12mm casing and capping of model : Glory type of M/s.Press Fit make or equivalent Press Tech/Modi make with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 11,750 | |
| — | Item Breakup | for details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( upto 10 meters length) (Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 1,00,815 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 2.5 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 2,04,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 1,54,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and run of 2 nos, 6.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 18,095 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 52,699.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 21,679 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 6A Bell push switch with indicator conforming to IS:3854 model no.AHLSBIW100/060, one module cover plate model no.AHLPLCWV01, 1/2 module flush metal box model no.AHZXMIZX01 of Havells make or equivalent make including all other connected accessories complete. | — | — | — | 32,425.6 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 16 A SP 1 Modular mini MCB 3KA conforming to IS:13947, C"Curve Model No.AA 1 112 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 18,850 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of USB charger with indicator (led) & 2 USB ports , output 5V, 2.6A in above mobile charging gang boxes(model no: AD 1 150 of GM make or equivalent make. | — | — | — | 44,960 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 2,115 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessores complete. | — | — | — | 1,410.6 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of wireless doorbell of model no: GM 4088 or its equivalent including all connnected accessories | — | — | — | 2,560 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of surface mounting plastic gang box-12 module of model no:JS 12 008 of GM make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,020.9 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,170 | |
| — | Item Breakup | for details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 9,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 5,575 | |
| — | Item Breakup | for details. | — | ||
| Groove Cutting for Modular SwitchBoards (Each=1Module) | — | — | — | 3,952.2 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of of Modular Dummy Plate for modular switch boards | — | — | — | 1,195.2 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) as per attached railway specification. | — | — | — | 71,598 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM) as per attached railway specification with all connected acessories. | — | — | — | 15,502.6 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of LINNET Aesthetically designed linear mirror LED light 7W Provided with a high output PMMA diffuser for glare free light conforming to IS:10322 of model no. LCL-07-CDL of Crompton make or it's equivalent make with all necessary accessories complete as per attached railway specification | — | — | — | 9,870 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of 1ft x 1 ft size, 22 W LED Recess / Surface mounting panel Light fitting as per attached railway specification with all connected acessories. | — | — | — | 24,328.9 | |
| — | Item Breakup | for details. | — | ||
| Supply and Fixing of 4 feet 20W LED tube light with Radar motion sensor. The fittings have to be fixed on the wall / Ceiling / FOB with suitable clamps. CCT 5700 K -6200 K Luminious flux : 1400-1600 Lpm, Input Voltage : 100-240 V, 50 Hz Power factor > 0.9, SMD LED 3014:117 Pcs , BEAM angle :180, CRI>71. Ingrees protection: IP20, base : Aluminium alloy housing cover : Forged , PVC lamp holder : PC /ABS , Action distance : phase 3 to 6 m. Suitable Box type fittings for LED lamps has to be supplied by the contractor. | — | — | — | 47,430 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc... | — | — | — | 2,26,258.4 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 R P M Exhaust fans including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 30,870 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 48,100 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 with metal door with provision for incomer of MCCB up to 160 Amps , bus bar of capacity 250A and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete or equivalent make. | — | — | — | 32,818.8 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of 32A Industrial Plug and Socket with IP67, 2P+E 240V of model no: CS2238 of C&S Electric make or Equivalent make conforming to IEC 60309-1 with its latest amendments. | — | — | — | 8,150 | |
| — | Item Breakup | for details. | — | ||
| supply and fixing of 16A combined unit with concealed metal box with 4M cover Plate + 16A c curve MCB + 16A Socket + 16A Magnus plug top equivalent to model no: AA 4 068 of GM make (glossy white) or its equivalent for AC points. | — | — | — | 3,371.5 | |
| — | Item Breakup | for details. | — | ||
| Supply fixing connecting and comissioning of 12 way SPN Distribution board 12 module of model no. 507612 with metal door of legrand make or equivalent make comprising of the following switchgear of make with all connecting accessories complete. | — | — | — | 7,776 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 63A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 6,237 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 4,266 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of 63 A 4P MCB C Curve , 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 16,644 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection, Testing and Commissioning of RCCB 4P 63A 30mA Sensitivity conforming to o IS 12640 (Part 1) : 2024 with its latest amendments, with 10 kA short circuit withstand capacity and as advised by the site supervisor with all necessary accessories complete. | — | — | — | 22,739.4 | |
| — | Item Breakup | for details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 69,958 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 11,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 11,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of FP MCB/RCBO enclosures model no.5077 93 of legrand make or its equivalent with required dummies and other accessories complete | — | — | — | 13,830 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of DP enclosures model no.5077 91 of legrand make or equivalent make. | — | — | — | 10,830 | |
| — | Item Breakup | for details. | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm FRLS, PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 33,000 | |
| — | Item Breakup | for details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical(FE), Half Elliptical (HE), SemiElliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 71,673.3 | |
| — | Item Breakup | for details. | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 2,75,604 | |
| — | Item Breakup | for details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 5,475 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant -Class FV-0 as per IS:11731 Part-II or V-0 as per UL-94 . Suitable clamps for fixing (MS Clapms 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. Fixing should be required as per instruction of site supervisor. | — | — | — | 8,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and fixing o f LED street light fittings of 40 W with suitable driver with all connected materials (The supply includes accessories such as clamps, ties for extenstion wires etc for fixing) conforming to IEC 60598-1 as per attached railway specification. | — | — | — | 63,450 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection, testing, commissioning of Capacitor indoor panel of 3 Phase Automatic Power Factor correction panel of 100 KVAR of 440 Volts 3 phase 50 HZ of with CRCA free standing floor mounting compartmentalized enclosure with frame 14 Swg and doors, partitions 16 Swg thicknessr espectively and of IP-42 protection siemens grey shade RAL7032 painting with copper busbar of suitable cross section with SMC/DMC supports, heavy duty capacitors with the steps as per the approved by Sr.DEE/M/GTL . 1 No.of Digital VAF meter ELF3259, 3 Nos of phase indicating lamps (RYB) reputed approved make, 3 Nos.of current Transformer 300/5A and 1 No.of exhaust Fan including all accessories as per specification No.SCR/E/APFCpanel/2/2009 (Rev.1) . The APFC Panel shall include suitable MCCB's of Microprocessor based, suitable stage APFC Relay, suitable size Heavy duty Cylindrical Capacitor (Step Size shall be decided by the Sr.DEE/M/GTL). Suitable size Capacitor Duty Contactor and MCB as per the step size of the Capcitor & Summation CT with suitable wiring. | — | — | — | 2,99,850 | |
| — | Item Breakup | for details. | — | ||
| Design, fabrication, supply and erection, testing and commissioning of plinth mounted weather proof outdoor type vermin proof, medium voltage 433 Volts, 3 phase, 4 wire system breaker panel with copper bus bar for incoming MCCBs and out going MCCBs confirming to IS 2516 or latest of specified capacities in general confirming to Railway Specification No. B/E.CN/Spec/01. The scope of work includes all civil works foundation bolts mounting channels etc. required as per the conditions . The panel shall be provided with specfied meters, indication lamps, switches MCCBs including CTs, PTS, etc. The panel shall be EPOXY powder coated with SIEMENS grey, The cost also included sign writing, fixing of standard caution boards etc., upto the satisfaction of Engineer at site INCOMING:- 200 Amps 50 KA 4 pole MCCBs -2 Nos., BUS BAR:-360 Amps TP&N Copper Bus Bar(After Derating factor) - 1 Set., OUT GOING:-i) 63Amps 4 pole 36 KA MCCB - 9 Nos. ii) 32 Amps 4 pole 36 KA MCCB - 1 Nos. iv) 400 Amps 4 pole changeover switch -1 No METERING:-i) 800 Amps, digital ammeter with Selector Switch -1 Set ii) 0-500 Volts, digital Voltmeter with selector switch -1 Set. iii) Digital kWH meter with RS 485 Port meters CT's of suitable ratio- 1 Set. iv) On, OFF, Two LED indication lamps with individual fuse and control with toggle switches -1set. NOTE: 1. All MCCBs fitted with Microprocessor based/electronic release based relays. 2.ICs 100% ICU. All the outgoing MCCBs shall be provided with neutral links and on indication lamps LED and MCCBS feeder details stricking on the panel. Make/Brand of meters Rishab/ Socomec/IMP /Conserv/ Schneider. Make/Brand of LED: L&T/ Schneider/Esbee/Teknik/Binay/Conserv/Schneider. Total 12 No of smart meters shall be provided in all incoming and outgoing Feeders. The Fabricator of the LT panel should have the CPRI approval. (Drawing approval to be taken prior to supply) | — | — | — | 4,96,339 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments with necassary lugs and terminations complete. | — | — | — | 7,72,860 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 2,71,500 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 5,17,020 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 3,08,220 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 2,40,000 | |
| — | Item Breakup | for details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 2,13,720 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,42,500 | |
| — | Item Breakup | for details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 72,000 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 4,680 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 1,50,420 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 89,600 | |
| — | Item Breakup | for details. | — | ||
| Excavation of cable trench in rocky soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 | — | — | — | 51,100 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables upto 150Sq mm and all necessary accessories complete. | — | — | — | 48,240 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 7004 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 with necessary terminals suitable for cables upto 70Sq mm and all necessary accessories complete. | — | — | — | 1,10,975 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent make conforming to IS:13573/92, IEC 60947-3 with necessary terminals suitable for cables upto 25 Sq mm and all necessary accessories complete. | — | — | — | 8,850 | |
| — | Item Breakup | for details. | — | ||
| Supply of TELESCOPIC LADDER, Aluminium Single Pole Platform step ladder, Capacity 120 kilogram Anti skid rubber shoe on the upper and lower side, Telescoping, Weather Resistant, Foldable for easy storage, Anti-corrosive Maximum Load Capacity (kg) 120 kilogram, Maximum Reach Height 15 foot, Type Single Pole, Material-Aluminium, MAKE similar to: AGARO/ CORVIDS or its equivalent | — | — | — | 18,125.21 | |
| — | Item Breakup | for details. | — | ||
| Supply of Insulation testing meter 500to 1000V, 0-1000 Mohms | — | — | — | 2,343.02 | |
| — | Item Breakup | for details. | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 4,939.95 | |
| — | Item Breakup | for details. | — | ||
| Supply and erection of Earth Electrode as per the RDSO Drg No. ETI/OHE/P/ 7021 (REV.A) or if any latest. Earth electrodes shall be procured from CORE approved sources only , List of CORE approved sources is enclosed as Annex-CORE List). | — | — | — | 25,314.9 | |
| — | Item Breakup | for details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on Earth Electrode. | — | — | — | 2,422.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Charcoal | — | — | — | 7,546.5 | |
| — | Item Breakup | for details. | — | ||
| Supply and Erection of Salt | — | — | — | 5,218.5 | |
| — | Item Breakup | for details. | — | ||
| Provision of RCC earth pit hollow box of size300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) It includes fixing of earth pits at various locations. Inspection by Consignee. | — | — | — | 13,047.9 | |
| — | Item Breakup | for details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site/location. | — | — | — | 3,728.25 | |
| — | Item Breakup | for details. | — | ||
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 2,14,695 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofLikelySuppliers.pdf
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
APFCPanel.pdf
ATTACHMENT
Signages_Standard_Sizes-1-42.pdf
ATTACHMENT
Signages_Standard_Sizes-43-75.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
EarthingSpec-MFEOther.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-81-2025-26_2.pdf
ATTACHMENT
RlyBd-JPO-DiggingofCables2013-Re-Circulatedin2022-LATEST.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .