Wellness Centre at Manali, District Kullu, Himachal Pradesh

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to the periphery of the area cleared including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil including carriage of materials up to all lead and lift as per direction of Engineer -in-charge dumping site/disposel site shall be arranged by the contractor at own cost and nothing shall be paid extra. -All kinds of soil.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils including carriage of materials up to all lead and lift as per direction of Engineer -in-charge dumping site/disposel site shall be arranged by the contractor at own cost and nothing shall be paid extra. Ordinary rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Soling with dry rubble stone under floor including labour,carriage & all leads and lifts of materials and as per directed by engineer in foundation and plinth including levelling upto plinth level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Centering and shuttering including strutting, propping etc. and removal of form including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders,bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiralstaircases

Shuttering Edges of slabs and breaks in floors and walls-Above 20 cm wide

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (TATA/Sail/Jindal Make or equivalent ) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

All works upto plinth level

All works above plinth level upto floor V level

Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular, as per design and shape for floors and roofs in 1:1½:3 (1 Cement : 1½ coarse sand) : 3 graded stone aggregate 10 mm nominal size), including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but, excluding the cost of reinforcement including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Cement mortar 1:4 (1 cement :4 coarse sand) in superstructure above plinth level up to floor V level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Above plinth level upto floor V level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) including all cost and conveyance of materials and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Random rubble masonry Cement mortar 1:6 (1 cement : 6 coarse sand) with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in:-Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Squared rubble masonry coursed with hard stone of approved quality in Superstructure above plinth level and upto floor two level including raking out joints in:-Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying weep holes of 75m dia PVC pipe including cost of materials, carriage, labour charges etc complete (7188-U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing NTC make pre cast Saucer drain (M-30) 300x300x100 including all cost and conveyance of materials and labour chrges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-30 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement neat cement punning on finished surface NTC or equivalent make-Road Gully 600x450 MM including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, double moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick Granite work counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Unistone slab 12.5mm cladding on RCC Surface side as on faces of Arch masonry walls etc.on 12mm. Thick cement plaster 1:3(1cement:3 sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. : 25 mm thick

40 mm thick White Sand stone (fine dressed ) flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Antiskid floor tiles of size (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(Kajaria,Somany,Nitco, orient, RAK or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. 300x300mm size

Providing and laying Antiskid vitrified floor tiles- Size of Tile 600x600 mm in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete- (Kajaria,Somany,Nitco, orient, RAK or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Vitrified tiles in different sizes-Vitrified Anti Skid 600x600- (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete(Kajaria,Nitco,RAK,Somany or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying vitrified floor tiles- Size of Tile 1000x1000 mm in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(Kajaria,Nitco,RAK,Somany or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete(Kajaria,Nitco,RAK,Somany or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. 1000x1000 mm

Providing and laying Wooden textured Ceramic floor tiles- Size of Tile1200x1200 mm in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(Kajaria,Nitco,RAK,Somany or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Ist quality ceramic glazed wall tiles -300x600mm size conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Kajaria,Somany,Nitco, orient, RAK or equivalent make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Brick texture pavers of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Local Stone cobbles as per drawing and design and specifications 200 X 100 X 100mm in required pattern including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick Sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing in wall lining flat pressed three layer medium density) particle board 18 mm thick or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing Second class Deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. :Sal wood

Providing and fixing Second class Deodar wood 40mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

18 mm thick

25mm thick

Providing and fixing 2nd class deodar wood 50 x 12 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 2nd class deodar wood 50 x20 mm wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 75 mm x 60mm moulded hand rails in straight length complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. 2nd class deodar wood.

Providing and fixing 18 mm thick, 300 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be easured and paid for separately) by using kail wood including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing 2nd class Second class Deodar wood weather board 230mmx 40mm thick including fixing in position by using incuding all cost and conveyance of materials and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing 2nd class Deodar wood weather board 200mmx 40mm thick including fixing in position by using incuding all cost and conveyance of materials and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

38 mm thick wood block flooring of Second classDeodar wood laid coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. Second class deodar wood

Providing and laying 8 mm thick pergo extra ac - 5 authentic oak class 32 as per EN 13329 flooring and foam density 35+/- 5 kg cubic meter used as a moisture and sound barrier, the panels having a click system tongue and groove joint with the edges duly impregnated with paraffin complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and supplying aluminium extruded tubular for payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. 8 mm thick Cement bonded wood particle board as per IS:14276

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. :Flat surfaces

Providing and fixing 12 mm thick Water Proof, Tamper Proof, Corrosion Resistant, Durable Coating PVC ceiling Panels including jointing and wood screws (frame work and cover fillets to be easured and paid for separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing cut to size12 mm thick toughned glass fixed MS frame glass and necessary cutting finishing for fixed window including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fiixng u PVC doors and window Aluplast-aluplast SL60 Sliding & Ideal 2000 Casement- or equivalent make including all fittings , cost and carriage of materials and labour charges etc complete with Plisse Mesh For fly mesh in nut tree colour with German Hardware (SI + GQ) Multipoint Locking System including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Ideal 2000 Casement IDEAL_2000, Frame profile:12 x 119395 Sash profile:2 x 119393 / FIB ,Colour Element Nut tree/Nut tree, Glass 3 x DGU (5mm CLT + 12mm AG + 5mm CLT) Fitting Outward opening window left - OK, FIX, Outward opening window right

Ideal 2000 Casement IDEAL_2000 Frame profile:8 x 119395 Sash profile:FIB / 119393 Colour Element Nut tree/Nut tree Glass 2 x DGU (5mm CLT + 12mm AG + 5mm CLT) Fitting FIX, Outward opening window right

Toilet @Exhaust Cutout Ideal 2000 Casement IDEAL_2000 Frame profile:8 x 119395 Sash profile:FIB / 119393 Colour Element Nut tree/Nut tree Glass 2 x 6mm Clear Frosted Toughened Fitting FIX, Top Hung Outward opening window

Ideal 2000 Casement IDEAL_2000,Frame profile:4 x 119395 Sash profile:2 x FIB,Colour Element Nut tree/Nut tree Glass 2 x DGU (5mm CLT + 12mm AG + 5mm CLT) Fitting FIX for Fixed window more than 1500m

IIdeal 2000 Casement IDEAL_2000,Frame profile:4 x 119395 Sash profile:FIB,Colour Element Nut tree/Nut tree Glass DGU (5mm CLT + 12mm AG + 5mm CLT) Fitting FIX

Supplying and fiixng u PVC doors and window Aluplast-aluplast SL60 Sliding & Ideal 2000 Casement- or equivalent make including all fittings , cost and carriage of materials and labour charges etc complete with fly mesh in nut tree colour with German Hardware (SI + GQ) Multipoint Locking System. SS Mesh @With C-handle Sliding 60 mm 3 Track SF60_DUO Frame profile:4 x 109071 Sash profile:109374 / 109374@3TME Colour Element White Glass 4 x DGU (5mm CLT + 10mm AG + 5mm CLT) Fitting FIX Sash, Sliding door right Sash Bar 2 x 109365 Sprosse 75mm Dimension 3500 Millimeter x 2100 Millimeter- Sliding door with fly mesh-3track including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement -Double action hydraulic floor spring with stainless steel cover plate- and making necessary holes etc. for fixing required door fittings, all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Door handle, lock and stopper etc.to be paid separately).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing bright finished SS butt hinges with necessary screws etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

125x85x5.5 mm (heavy type)

Providing and fixing bright finished SS tower bolts (barrel type) with necessary screws etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing SS sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing bright finished SS CYLINDRICAL LOCKS -Keyed of approved quality with necessary screws etc. complete.Godrej or equvalent make including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing bright finished SS CYLINDRICAL LOCKS - Keyless (Bathroom) of approved quality with necessary screws etc. complete.Stainless Steel Godrej or equvalent make including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing bright finished SS CYLINDRICAL LOCKS - Keyless (Bathroom) of approved quality with necessary screws etc. complete.Stainless Steel Godrej or equvalent make including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of H Shape door handle (Material Stainless Steel, Finish Color Silver,Handle Type Pull Handle,)Ideal For Exterior Door,Size32*302*457 including all cost and conveyance of materials and fixing charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Rubber Door Buffer Door Stopper including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of swing Double Glass Door Lock(Material Stainelss Steel,Lock Type Mortise,Ideal For Main Door,Finish Type Stainless Steel,Model Name/Number SH-GDL-06,Material Grade SS304) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Door Stopper Powerful Working with Screw 5 Inch/ Door Stopper to Stop Door for Home and Office (Matt Finish, Pack of 1) door stopper with rubber cushion, necessary screws etc. to suit shutter thickness complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Plastering with 6 mm thick cement plaster of mix 1:3 (1 cement : 3 fine sand) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

12 mm cement plaster finished with a floating coat of neat cement of mix in cement mortar 1:3 ( 1 cement :3 sand) including carriage of material upto all leads and lifts and as per direction of Engineer incharge-12 mm cement plaster finished with a floating coat of neat cement of mix including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

12mm thick Plastering with Cement mortar 1 : 4 (1 cement : 4 fine sand) cement plaster of mix including alla cost and conveyance of materials and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15mm thick Plastering with cement plaster 1:4 (1 cement: 4 fine sand) on the rough side of single or half brick wall of mix including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled/ Struck or weathered pointing including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) in Raised and cut pointing including all cost ,carriage and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Finishing walls with water proofing cement paint of required shade on New work (Two or more coats applied @ 3.84 kg/10 sqm) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Applying priming coat With ready mixed clear primer-Clear instead of pink or grey primer as per SOR of approved brand and manufacture on wood work (hard and soft wood) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Melamine polishing on wood work (one or more coat) including hire charges of Spraying machine electric charges, cost and carriages of materials and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work by using Synthetic enamel paint in black including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade,Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. The cost includes wood primer,Brushes, sand paper, paint etc. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

French spirit polishing : Two or more coats on new works including a coat of wood filler including spirit, pigment,shellac,white woolen clothe, putty, sand paper cotton, linseed oil etc. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Lacquer polishing on wood work two or more coat including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler, including carriages of materials in all lead and lift and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.(TATA/Sail/Jindal Make or equivalent )

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.(TATA/Sail/Jindal Make or equivalent )

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. Complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet ( Tata Durashine make / Century) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with repainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick preprinted steel sheets ( Tata Durashine make / Century) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with preprinted iron J or L hooks, bolts & nuts 6mm dia & preprinted G.I. limpet and bitumen washers complete with all accessories including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing valley 60 cm overall 0.60mm thick preprinted steel sheet ( Tata Durashine make / Century) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic outing of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet ( Tata Durashine make / Century) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 0.80mm thick sheet. 15 cm. wide 45 cm. overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing M.S. BP Sheet ( Tata Durashine make / Century) 1.66mm to 2.00 mm thick in eaves board/facial/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Base members of steel work shall be measured & paid separately)

Providing and fixing G.I. chain link fabric fencing Made of G.I. wire of dia 4 mm width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing RCC M-30 sitting Benches of following specifications at various places including carriage of materials up to all lead and lift as per direction of Engineer in charge. Specifications:- (Length 1.20m, Seating height-0.45m & Total height -1.0m). Each bench consists of 2nos L shape base support 100mm thick,3 nos RCC planks (2Nos-1200mmx100x50mm &1 No1200x200x50mm) fixed with galvanised nuts and bolts of suitable size. Top & back planks shall be treated with special anticorrosive water proof coating.

Providing supplying and fixing Kiosks-2.00x2.00x3.00m for shops including cost , carriage and labour for fixing etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing supplying and fixing Kiosks-3.00x3.00x3.00m for shops including cost , carriage and labour for fixing etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes- 110 mm diameter conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

110mm dia couplers

110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 110 mm to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 75 mm diameter on unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

75mm dia PVC coupler

75 mm bend

75 mm Shoe

75x75x75 mm Single tee without door

Demolishing lime concrete manually/ by mechanical means and disposal of material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

In mud mortar

In lime mortar

In cement mortar

Demolition of stone masonry below G.L. upto 1.5 Metres depth including stacking of serviceable materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Rubble masonry in lime mortar.

Dismantling dhajji walling including stacking of serviceable materials and disposal of un-serviceable materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

In lime mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including howkhats, architrave,holdfasts etc. complete and stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Of sectional area 40 square centimetres and above

Of sectional area below 40 square centimetres

Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Of sectional area 40 square centimetres and above

Of sectional area below 40 square centimetres

Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Of sectional area 40 square centimetres and above

Of sectional area below 40 square centimetres

Dismantling of wooden floors upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (joists to be measured and paid for separately).

Dismantling wooden boarding's in lining of walls and partitions including frame work and stacking the materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

G.I. Sheet roofing.

Dismantling steel work in single sections including dismembering and stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

R.S. Joists

Channels, angles, tees and flats

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for marking of structural steel work required to be re-erected.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mmd.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.

Removing mortar from bricks From brick work in cement mortar and cleaning bricks including stacking including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (stacks of cleaned bricks shall be measured):

Demolishing stone rubble masonry In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling dressed stone work In cement mortar ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

In lime mortar

In cement mortar

Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

75 to 80 mm dia pipe

100 mm dia pipe

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling of Up to 150 mm diameter C.I. sluice valve including stacking of useful materials including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Water Supply /Sanitary Installation Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete and Concealed work, including cutting chases and making good the walls etc. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15mm dia GI

Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

20mm dia GI

Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

25mm dia GI

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external work including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Providing and fixing One Piece EWC ‘Gila’ Siphonic with Soft Close Seat Cover & Flushing Kit 26″X 15″X 30″ 'S' trap JAL make CATALOGUE NO.-65227-13 (White) SIZE 26"X 15"X 30" or equilent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Table top wash basin 510x410 or nearest size ,white in colour with all accessories JAL make CAT No- 66115-13 including painting of fittings and brackets, cutting and making good the walls wherever require or equilent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing white vitreous china flat back or wall mount front urinal basin 600x375x350mm size JAL make,CAT.NO-65611-13 or equivalent respectively with automatic flushing cistern with standard flush pipe and CP brass spreaders with brass union and GI clamp etc complete including painting of fittings and brackets,cutting and making good the walls and floors wherever required. One urinal basin with 5Litre White PVC flushing cistern including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing urinal partition with 900x450mm size partition wall of approved quality including all charges for cost, carriage,and labour for fixing and making the wall good including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Double bowl Stainless Steel Kitchen sink glass finish 30"x18"with Bowl size 16"x14" JAL make CATALOGUE NO-98232 , including painting of fittings and brack ets, cutting and making good the walls wherever required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 15mm dia, 45 cm long uplasticised PVC connection pipe with brass unions including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing JAL make-Warna Series CAT No- 9219 Health Faucet set with Thread Tube 1 Mtr & ABS Hook 15mm including all charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of Single Lever Basin Mixer 15 mm JAL make -CATALOGUE NO- 73617 or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of Sink Mixer 15 mm JAL make -CATALOGUE NO- 3534 or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms for wash basin and sink, of approved quality and colour. JAL make CAT No-1060 or equivalent make including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Bottle trap JAL make CAT no-1861 or equivalent 40mm size of approved quality and make including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 40 mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Necessaries GRATINGS AND COCKROACH TRAPS Grating Round Stainless Steel, Matt finish Size:5 inch JAL make - CATALOGUE NO. 9322 or equivalent including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Rectangular shape 600x750 mm JAL make CAT No-46511 of superior glass (of approved quality) complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 15 mm nominal bore C.P. brass short body bib cock JAL Make-CAT No-3531 of approved quality conforming to IS:8931 including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

CP brass 15mm dia

Providing and fixing CP brass 15mm dia long body bib cock JAL Make CAT No-3535 of approved quality conforming to IS standards and weighing not less than 690 gms including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

CP brass 15mm dia-kitchen sink

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) JAL Make-CAT No-3545 of standard design and of approved make conforming to IS:8931 including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15 mm nominal bore

20mm nominal bore

Providing and fixing 15mm nominal bore C.P. brass angle valve JAL Make CAT No-3548 for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15mm nominal bore

Providing and fixing JAL make warna series Cat.No-36548 toilet paper holder with flap specification including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing JAL make Cat.No-70548 toilet paper holder with cutter including all charges for material, carriage & labour etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Jal make Towel Rack 600mm for the bathroom Catalogue No. 36530 or equivalent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing JAL make Towel Ring CATALOGUE NO.22524 or equilent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Kimberly-Clark Aquarius Multi Fold Paper Towel Dispenser M Fold Paper Towel Dispenser - 1 X White Paper Towel Dispenser (23.2 cm x 28 cm x 11.6 cm) wall mount toilet paper dispenser including all charges for material, carriage & labour etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing CP Grab bar Plastic cruse wall mounted or equivalent 350mm long including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing CP Grab bar Plastic cruse wall mounted or equivalent 600mm long including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing coat hook -4, 200mm long including cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing JAL make Soap Tray -22540 or equilent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Liquid Soap dispensor JAL make Cat.No-70547 orequilent including all cost, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing MAYA Coin Acceptable Sanitary Napkin Vending Machine - 50 Smart ,Storage Capacity: 50 Napkins Colour: Gray, Blue, Product Dimension (L x W x H): 540mm x 260mm x 430mm Construction: MS Powder Coated) with 12.0 kilograms weight and having Warranty Description: 12 Months manufacturing warranty and 6 months spares warrant including all charges ofmaterial ,carriage and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing wall mounted Baby changing seat ORCHIDS INTERNATIONAL or equivalent make Safe and secure, convenient and hygienic,Compact and ultra-slim pro le, Heavy-duty integral molded hinges for strength and safety,Restraining harness: fully adjustable “no noose” safety harness with 3-part heavy-duty nylon, HDPE ,Gray in colour equipped with safety belt of size 527mm (h) x 344 mm (w) x 297mm (d) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Wall mixture composite body set concealed with ' easy turn' diverter with tub filler, over head and hand shower 15mm with NRV for shower system Jal make Cat.No 35556 or equivalent including all charges of matrials for fixing, carriage and labour etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Luxury Shower Cubicles TAITON make TMAX-DL2C02 series, or equivalent of 900x1400x2100 size Double Sliding Door Shower Cubicle of Standard glass thickness- 10mm , Standard color -Green Bronze Material : SS 304 including all cost of materials , carriage, and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Bath tub of JAL make CAT No-43217 or equivalent make including all accessories, all cost of materials , carriage, and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying non-pressure NP2 class (light duty)100 mm dia. R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality-Rectangular shape 600x450 mm internal dimensions including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and filling sand of grading zone V or coarser grade, llround the G.I. pipes in external work including cost of sand filling alround 15mm dia. Pipe,Width of sand filling 300mm, Depth of sand filling Under the pipe 75mm, Above the pipe = 150mm including all cost of materials, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

15mm dia pipe

Providing and filling sand of grading zone V or coarser grade, llround the G.I. pipes in external work including cost of sand filling alround 20mm dia. Pipe,Width of sand filling 300mm, Depth of sand filling Under the pipe 75mm, Above the pipe = 150mm including all cost of materials, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

20mm dia pipe

Providing and filling sand of grading zone V or coarser grade, llround the G.I. pipes in external work including cost of sand filling alround 25mm dia. Pipe,Width of sand filling 300mm, Depth of sand filling Under the pipe 75mm, Above the pipe 150mm ,including all cost of materials, conveyance and labour charges etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

25mm dia pipe

Tube well Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log,including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

All types of soil-300mm dia bore

Rocky strata including Boulders-300mm dia bore

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia , conforming to IS: 4270, of reputed & approved make, including MS centre guide of approved quality ,painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

150 mm nominal size dia having minimum wall thickness 5.00 mm

100 mm nominal size dia having minimum wall thickness 5.00 mm

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

100 mm nominal size dia

150 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 150 mm dia including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing M.S. clamp of 150 mm dia clamp to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Bail plug/ Bottom plug of 100mm dia dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Open ball (to stop falling of submersible pump into the bore well) fabricated by joining two circle of 100mm dia across ( dia of bars for which circle shall be fabricated is 8mm), including carriage of materials up to all lead and lift and as per direction of engineer in charge.

Supplying and stacking at site. Good earth including all cost and conveyance and spreadign etc complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and stacking at site dump manure from approved sources (duly screened through specified sieve) including carriage upto 100 metres on head load and 1 km. By mechanical transport (manure measured in stacks will be reduced by 8% for payment). Details of cost for one cum Royalty deleated as per noting including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted egetation including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid separately) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Mixing earth and sludge or manure in proportion specified including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

In rows 15 cm. Apart in either direction.

In rows 7.5 cm. Apart in either direction.

In rows 5 cm. Apart in either direction.

Preparation of beds for hedging and shrubbery by excavating upto 1.5 metre depth and trenching the excavated base to a further depth of 30cm. Refilling the excavated earth after breaking clods and mixing with sludge or manureia the ratio 8:1 (8 parts of stacked. volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8% flooding with water, filling with earth if necessary, watering and finally fine dressing levelling etc. including stacking and disposal of materials declared un-serviceable and surplus earth by spreading and levelling including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. Notes:- Earth work in excavation to be paid vide item no 07040000 depending upon classification of soil. ii) Cost of sludge, manure or extra earth to be paid for separately

Digging holes to specified/standard size of pit for plantation in soil and stacking the excavated soil near by the pits and then refilling the same with the excavated earth/good earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% 1 part of stacked volume of manure after deduction by 8% flooding with water dressing etc. complete as per requirement and direction of Engineer in charge including cost and carriage of good earth and manure up to all lead and lift through manual &mechanical means

Half brick circular tree guard in second class bricks, internal diametre 1.25m, and height 1.20m. above ground and 0.20m. Below ground bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing M.S. Flat iron tree guard 60 cm. Dia, and 2 metre high above ground level, formed of 4 Nos. 25x6mm.and 8 Nos. 25x6mm vertical M.S. Flats riveted to 3 Nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8 mm. Dia and 30mm. Long bolts including painting two coats with paint of approved brand and manufacture over a coast of priming complete in all respects including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Edging with second class bricks laid dry length-wise including excavation refilling, consolidating with hand packing and spreading neatly surplus earth including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and planting of following trees category A of the given sapling including take proper care and necessary maintanance for a period of four months from the date of plaanting complete as specified and directed by engineer in charge including carriage of materials in all leads and lift

Deodar

Bottle palm

Golden crest /Green crest

Lagerstroemia

Bottle brush

Kachnar(Mountain Ebony)

Roses(multi colour)

Rhapis palm

Ferkeria

safed Chameli

Harsinger

Amaltas

petronia

Apple

Dahlian(multi colour)

Daisies (multi colour)

Bari purple

Filling of earth work and sludge or manure in the desired proportion in trenches, flooding with water and levelling of supplying earth and sludge or manure and mixing excluded including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and planting of shrubs as approved including take proper care and necessary maintanance for a period of four months from the date of plaanting complete as specified including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

STP Design, providing,erection,commissioning and testing of complete machinaries / equipments as per site requirement having minimum capacity of 50KLD sewage Treatment Plant(STP) including electrical equipment’s/fixtures & fittings and wiring etc. The components shall include but not limited to SS bar screens, Raw sewage pumps (Kirloskar/ Crompton or equivalent make) of required capacity , course bubble diffusers, fine bubble diffusers, air blowers, sludge recirculation pumps pumps (Kirloskar/ Crompton/Johnson or equivalent make), filter feed pumps pumps (Kirloskar/ Crompton or equivalent make), chlorinated, pressure sand filters, activated carbon filter, slush handling system( Bag filter including minimum of 20 numbers of spare bags), decant mechanism, inter unit piping, electric panels, cable and cable termination for all electrical equipments and inter unit connections. The contractor shall be responsible for getting the statutory approvals for installation of STP. The rate shall also include operation and maintenance and consumables for a period of Three years after handing over or commissioning of the STP whichever is later including training line agency to run the plant. In case at different technology is used / proposed by the bidder the rates quoted in this bid shall not be revised and the technology proposed should be got approved from the State pollution control board and also pursue the case consent of establishment of STP and get it approved from SPCB. The output paraPer running Metres of the STP shall be in confirmative to the applicable pollution control norms (CPCB & SPCB)as applicable on date of commissioning of the plant STP). Once the STP is ready for commissioning, the successful bidder shall pursue the case of consent for operation with SPCB and also fulfil all the conditions of State Pollution Control Board (SPCB) (Warranty is provided for 36 months from date of installation) The agency shall provide shop drawings at site with all necessary specifications at site for prior approval from concerned department.

E.I. work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. as required. (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Group A.

Group C.

Wiring for twin control light point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HR-FRLS-H-LF PVC insulated copper conductor single core cable etc. as required (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Group C.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm HRFRLS-LR PVC insulated copper conductor single core cable etc as required. (Polycab/Havells/Finolex for wires make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Group A

Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand/Hager/Siemens make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Supplying and fixing two module stepped type fan regulator Legrand make Cat no. 6792 40 Fan Regulator 100W 360 Degree 2M White on the existing modular plate switch box including connections etc. as required. (Legrand/Schneider/Siemens make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Legrand/Hager/Siemens make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Legrand/Hager/Siemens make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing PVC batten/ angle holder including 9W Blub and complete connections (Anchor/Havells/Philips make or equivalent or as approved by site engineer) etc. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.(Polycab/Havells/Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

1 run of cable

Supplying and drawing following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Polycab,Havells,Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

1 x 1.5 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab/Havells/Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Polycab/Havells/Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. (Precision pipes/Jindal/Di-plast make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

20 mm dia. ISI marked, PVC conduit

25 mm dia. ISI marked, PVC conduit

32 mm dia. ISI marked, PVC conduit

40 mm dia. ISI marked, PVC conduit

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Single pole

Double pole 32Amp

Triple pole and neutral 32Amp

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

25 Amps. Cat-A

40 Amps. Cat-A.

63 Amps. Cat-A

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Double door-4 way

Double door-6 way

Double door-8 way

Double door-12 way

Supplying and fixing following way, Horizontal type/Vertical type (As per site) three pole and neutral, sheet steel, MCB distribution board, 415V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Double door-4 way (4+12)

Double door-6 way (4+18)

Double door-8 way (4+24)

Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable with BLDC Motor etc (Usha/Atomberg/Kuhl/Crompton Greaves make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Swift Ceiling Fan 600 mm sweep, White Colour Usha Make category-A

Bloom Magnolia Ceiling Fan 1250 MM sweep, White Colour Usha Make category-A

Striker Galaxy Ceiling Fan 1400 MM sweep, White colour Usha Make category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan with BLDC Motor, making good the damages, connections, testing and commissioning etc (Usha/Atomberg/Kuhl/Crompton Greaves make or equivalent or as approved by site engineer)

Exhaust Fan Fiber Body, Light Duty Sweep 15 cm (150 mm), Usha make EXHAUST FAN CRISP AIR PREMIA AS PLUS

Exhaust Fan, Light duty, Sweep 20 cm (200 mm) Usha make Striker High Speed Exhaust

Exhaust Fan, Metal Heavy duty, 300 mm sweep, Usha make TURBO HEAVY DUTY

Providing and installation of stationary storage type Electric water Geyser Racold Make by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. (Racold/Bajaj/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Andris Slim Racold make 30 Liter capacity water heater (Cat-A)

Platinum Plus Racold make 50 Liter capacity water heater (Cat-A)

Pronto Style Racold make 6 Liter capacity instant water heater 5 Star

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-(Legrand/Havells/Panasonic make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

2 modules (78mmx78mmx50mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections (Legrand/Hager/Siemens make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Telephone Socket outlet modular type Legrand Make 6792 62 RJ11

T.V. Socket outlet modular type Legrand Make 6792 60 TV co-axial

RJ 45 Lan Connector Legrand Make

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required (Polycab/Havells/Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required (Polycab/Havells/Finolex make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete as required (Bajaj/Havells/Anchor make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

G.I. earth plate 600 mm X 600 mm X 6 mm thick

Copper earth plate 600 mm X 600 mm X 3 mm thick

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing 8 SWG dia Copper wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- (Polycab/Havells or ISI make as approved by site incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Armoured cable 6sq. mm (2 core)

Armoured cable 10 sq. mm (4core)

Armoured cable 16 sq. mm (4core)

Armoured cable 50sq. mm (3.5 core)

Armoured cable 95sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Armoured cable 240 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- (Polycab/Havells or ISI make as approved by site incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Armoured cable 6 sq. mm (2 core)

Armoured cable 10 sq. mm (4core)

Armoured cable 16 sq. mm (4core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 95sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Armoured cable 240 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Providing and fixing following type of Surface fixture Havells make Cat No. PLANOSUR2X2PLS36WLED857S0720, 36W, (2x2fts) complete with all accessories, connections, testing and commissioning etc. as required.(Havells/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Surface fixture Havells make Cat No. MONDO600RDP/S36WLED830SPSWH, 36W, Dia 600 mm, Height 70 mm, Suspened fixture, complete with all accessories, connections, testing and commissioning etc. as required. (Havells/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of recess fixture Havells Make Cat No. PLUTONEO4X1PLR36WLED840S, 36W, (1x4fts), complete with all accessories, connections, testing and commissioning etc. as required.(Havells/Philips/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Surface fixture Sleek Surface Downlight Philips make SM251C LED20S- 3000 PSU WW 20 watts complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Havells/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Recess fixture Philips Make Cat No. DN296B LED20S-6500 PSU, 3000K, 20Watt, Colour-WW colour complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Havells/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of HARROW PLUS AL Panasonic make Cat no. PBTM17228, 22W, 5700K Tub, LED batten for surface and suspended applications. Aluminium housing, high transmissibility diffuser with high lumen output, complete with all accessories including connections, testing and commissioning as required (Panasonic/Philips/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of Surface mounted TRUSS ADV Panasonic make Cat No. PBTM05404, 40W, 4000K IP65 Batten with inbuilt heat sink, polycarbonate housing equipped with anti-glare diffuser & energy efficient electronices driver complete with all accessories including connections, testing and commissioning as required (Panasonic/Philips/Wipro make or equivalent or as approved by site engineer)

Providing and fixing following type of Recess fixture Philips Make Deco COB Rose Gold colour, Colour: Warm White Light, Material: Aluminium, Lumen/CCT 960lm/ 3000K, Dimensions (mm): 86x86x75, Cutout Dia (mm): 76, Wattage: 12W, complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Recess fixture Philips Make Deco COB Chrome colour, Colour: Warm White Light, Material: Aluminium, Lumen/CCT 960lm/ 3000K, Dimensions (mm): 86x86x75, Cutout Dia (mm): 76, Wattage: 12W, complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Ceiling light Philips make Summit Model No: 581898, Colour: Silver, Material : Aluminium, Dimensions (mm) : 400x100, Lamp Base : LED, Wattage : 1x25W, Lumen/CCT: 2300lm/ 3000K of complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall Light Philips make Cormorant Model No. :1738130, Colour: Black, Material : Synthetic-Metal, Dimensions (mm) : 207x250x266, Lamp Base : E27, Wattage : 1x10W of complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall Light Philips make Robin Model No: 15470, Colour: Black, Material : Aluminium-Synthetic, Dimensions (mm) : 174x200x240, Lamp Base : LED Integrated, Wattage : 1x8W, Lumen/CCT: 430lm of complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall light Roseate Philips Make Model No. Model No. 58135, Single Head Wall Light, Colour : Matt & Gold, Material : Aluminium & Metal, Dimensions (mm) : 135x175x290, Lamp Base : E27, Wattage : 20Watt colour WW of complete with all accessories, conneactions, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall light Roseate Philips Make Model No. Model No. 58135, Double Head Wall Light, Colour : Matt & Gold, Material : Aluminium & Metal, Dimensions (mm) : 370x175x290, Lamp Base : E27, Wattage : 20Watt colour WW of complete with all accessories, conneactions, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall light Philips Make Striker, Model No. 581876, Colour : Chrome with fabric white shade, Material: Metal, Dimensions (mm): 250x220x225, Lamp Base: E27, Wattage: 1x20W of complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall light Philips Make Model No. 58152, Single Head Wall Light, Colour : White, Material : Aluminium, Dimensions (mm) : 160x152x228, Lamp Base : LED, Wattage : 10Watt, Lumen/CCT : 500lm/3000K of complete with all accessories, conneactions, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Wall light Philips Make Model No. 58153, Double Head Wall Light, Colour : White, Material : Aluminium, Dimensions (mm) : 1378x152x228, Lamp Base : LED, Wattage : 20Watt, Lumen/CCT : 1000lm/3000K of complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Philips make Muziris Picture Light 12W, Model No. 31403, Color: bronze, Material: Aluminium, Warm White in colour, Lumens/CCT: 420lm/3000k complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Jaquar/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of following fixtures complete in all respect including connection as required and as approved by site incharge including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Electronic Foot Lamp with LED Philips make white colour (Philips/Jaquar/Havells make or equivalent or as approved by site engineer)

Led Surface fixture 3W LED Slim Havells make 3000K, Cat No. LHEAATPBIV1W003 (Philips/Jaquar/Havells make or equivalent or as approved by site engineer)

Limit Switch with minimum of 3Amp current, 220V (for Wardrobe and other appliances Light Control) SiSAH make or equivalent or as approved by site engineer)

Wall Fan Usha Make Turbo 180, Sweep 45 cm (450 mm), Air Delivery 125 m3/min, Speed 1330 RPM, Power Input 125 W (Usha/Havells/Bajaj make or equivalent or as approved by site engineer)

Providing and fixing of Mirror Light complete with all accessories including connections, testing and commissioning as required. (Jaquar/Havells/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Philips make Vega 22 Watt LED Mirror Light Model No. 58158

Philips make Mirror 11 Watt model no. 31165

Providing and fixing following type of Recess Fixture Wipro make Mollis LD06, Cat No. LD06-151-XXX-57-XX, Warm White, 12Watt complete with all accessories, connections, testing and commissioning etc. as required. (Wipro/Philips/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Surface Fixture Wipro make Mollis Surface LD06, Cat No. LD06-151-XXX-57SMG1, Warm White, 12Watt complete with all accessories, connections, testing and commissioning etc. as required. (Wipro/Philips/Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type of Wall Washer Philips Make Gamma Light Double Head, Colour : Anthracite, Material: Aluminium, Dimensions (mm) : 119x80x38, Lamp Base : LED Integrated, Wattage: 4W, Lumen/CCT : 250lm/3000K, Warm White light, in colour complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Havells/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of Boundary wall Light Havells LEXO (PRISMATIC) Cat No. LHFOGAE1T11F0, high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base. including 0.30 mtr. 40mm G.I.pipe for fixing, containing one no. 2way MCB DB ,6 Amp. MCB, painting complete with all accessories including 5W LED lamp including making connections, testing etc. as required or as approved by site incharge (Havells/Philips/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of Gate Light Post Top Vista LP09S, Product Code: LP09S-501-XX-57-XX, 4000K, 45Watt Wipro Make and complete with all accessories including making connections, testing etc. as required (Wipro/Havells/Philips or as approved by site incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of Foot Light/Step Light including making connections, testing etc. (Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Philips make Step Light Model No. 30974, Colour: White, Material : Aluminium, 2Watts, Lumen/CCT: 30lm/3000K indoor applications

Philips make Andromeda LED Steplight, Model No. 31435, IP65, Colour: Anthracite Grey, Material : Aluminium, 3Watts, Lumen/CCT: 50-lm/3000K outdoor applications

Providing and fixing following type Hanging light Philips Make Muziris, Model No. 31433, Colour: Bronze, Material: Aluminium & Wood, Dimensions (mm): 310x310x270, Lamp Base: E27, Wattage: 1x20W of complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing following type Hanging light Jaquar Make Model No. JNL-CHR-MD160020053B, Description: 3 Light clear glass, rose gold mesh with chrome finish pendant , Lamp: G9, LED 4W x 3, of complete with all accessories, connections, testing and commissioning etc. as required.(Jaquar/Philips/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, storing, assembling, fixing, testing & commissioning of chandeliers including cost of hangers, chains or any other item required for fixing, including flexible wire from outlet to fitting, Philips make or equivalent or its equavalent as approved by the engineer Incharge for indoor application suitable for installing on existing ceiings etc for designer lighting purpose complete in all respect. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. including carriage of material in all leads, lifts and heights through mechanical or manual trasport CONCEALED LIGHT CHANDELIER Philips make Torrent chandelier, Model No.581901, Colour: Chrome, Material: Stainless steel with clear crystal, Dimensions (mm): Dia. 550 X H 570, Lamp Base: G9, Wattage: 8x33W. (Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, storing, assembling, fixing, testing & commissioning of chandeliers including cost of hangers, chains or any other item required for fixing, including flexible wire from outlet to fitting, jaquar make or equivalent or its equavalent as approved by the engineer Incharge for indoor application suitable for installing on existing ceiings etc for designer lighting purpose complete in all respect. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. including carriage of material in all leads, lifts and heights through mechanical or manual trasport CONCEALED LIGHT CHANDELIER: Jaquar make Cosmos chandelier with asfour almaaza crystal (D 600 x H 90 MM), Jaquar make, Cat No. CHL-GLD-AS11021, Material: Brass, Wattage: 60 W LED, Weight (Kg): 12. (Jaquar/Philips/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, installation, testing and commissioning of Astronomical time switch Havells make Cat No. DHTQB01016 2 output per phase and suitable for single,capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming and with Magnetic Contactor 4 Pole Power Contactors with AC Coil 2NO + 2NC Cat No. IHPHC032122, at site complete as required. (Legrand/Havells/L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts. (Havells, L&T make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Havells make Cat No. IHDA6TBF0063 ,63 Amp FP, MCCB

100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Havells make Cat No. IHDA6TBF0100 ,100 Amp FP, MCCB

200 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC020008 having with Havells make Cat No. IHD2HTBF020 ,200 Amp FP, MCCB

Supply, Installation, testing and commissioning of 100 Amp FP Changeover switch in SS enclosure, Havells Make Cat no. IHCNFE0100 having space for incoming/outgoing cables, wall mounting type, front operated all complete with inter connections and painted with powder coated as per direction and approval of the site engineer including all leads and lifts. (L&T,Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, Installation, testing and commissioning of "Do Not Disturb" and MMR Control Unit Make -Legrand, Model-Myrius Next Gen Cat no. 6792 56 and 6792 57 in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, Installation, testing and commissioning of 16Amp. Single Phase Key FOB Switch Make-Legrand, Model-Myrius Next Gen, Cat no. 6792 53 with three no of keys Cat. no. 6792 55 for switch on and off light in the room as per direction and approval of the site engineer including all leads and lifts (Legrand,Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, Installation, testing and commissioning of 40A Power Contactor with two NO and signaling auxiliaries for contractors conforming to IEC/EN 61095 for single Phase switching of internal lighting in the room Make Legrand, Model-CX3 Cat no. 4125 45 and 4124 31, as per direction and approval of the site engineer including all leads and lifts.(Legrand,Havells make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Fire Alarm System SITC of UL listed/FM approved Intelligent Addressable Siemens make Fire alarm control panel, The panel shall be networkable & expandable having required number of loop for 850 addressable detectors & 200 addressable devices . The panel shall have 240V AC power supply, automatic battery charger, 24V SMF batteries sufficient for 24 hour in standby and 15 minutes in alarm complete as per specification. UL listed 6" Touch screen LCD display supporting smart degrade mode operation. UL listed 12 Amps inbuilt power supply with 70Ah capacity battery charge. UL Listed Lead Acid battery charging capacity for second dry power supply. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed active Repeater Panel with Back lid LCD display Siemens make to provide event information and LED display for status indication of Repeater panel. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Intelligent Addressable Multi application multi criteria detector Siemens make with responsiveness of photoelectric, thermal technology and false alarm resistance along with base. The detector shall have Tri colour LED for Normal, Fault & Alarm condition. The detector shall have infrared Light Emitting Diode & photo sensing diode. The detector shall have facility to mount in different comprehensive environment like Hostile environment, Parking Garage, HVAC Ducts, Precious storage, Transformer rooms Ware house, Dormitory and normal working environments. Vendor to include suitable mounting box as required. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Intelligent Analogue Addressable Type Rate of Rise/Fixed Heat Detector with inbuilt turbo Isolator Siemens make Complete with LED, addressing done by the FACP, complete with Mounting Base as required. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Intelligent addressable Manual Call Point - Pull station Siemens make, polarity insensitive technology complete as per specification.(MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Multi Tone Hooter suitable for Alarm siren Siemens make, It shall meet the audibility requirements for smoke alarms as specified in UL Listed Single and Multiple Station Smoke Alarms. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Duct detector having Intelligent addressable Multi criteria Detector (Photo + Rate of Rise cum Fixed) Siemens make, polarity insensitive technology with proper housing complete as per specification. The detectors shall have soft addressing, Manual addressing shall not be accepted, (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed addressable Control cum Monitor Module Siemens make (Independent Single Input & Single Output) polarity insensitive technology, in complete as per specification for AHUs, Hooter, Flow switches, third party system integration etc. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of UL listed Fault Isolators complete as per specification Siemens make, the fault isolator shall not occupy any address point in the loop.(MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Response Indicators Siemens make outside the rooms for getting fire indications of detectors installed above false ceiling / for particular zone / for Loop devices / as a Panel to loop cable complete as required. (MAKE: Siemens/Honeywell/Ceasefire or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Talk back receiver AHUJA CCS-2300, 2-WAY COUNTER COMMUNICATION SYSTEM as per specification complete (MAKE: Ahuja or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of following including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Ceiling/ Wall Mount Speaker with operations 6 Watts, (Black LBD 3902 Bosch 6W Wall Mount Speaker) (MAKE: Bosch/Ahuja/JBL/PylePro or equivalent)

In-Wall Dual Channel Stereo Volume Control (MAKE: PylePro/Ahuja/Legrand or equivalent)

Supplying & Fixing of Energy saving display EXIT sign board Glass type specially designed for classic décor with excellent quality high efficiency and long life for single / both side display, well ventilated, powder coated having nominal size LED lamp, battery backup 6 hour to be installed on wall / ceiling etc. complete as required. (MAKE: FGE/ LEGRAND/ ABB), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Providing & installing self glow signs luminescent U-1000 Alu. sheet with 2 mm thickness sheet on the wall / ceiling etc for the size of (4''x12'' ) as reqd.(Make : Nightglow/FGE), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supplying and laying of 1.1 KV Grade 2 X 1.5 sq.mm. copper cables on surface / conduit complete with clamps etc as reqd. (MAKE: Polycab/KALINGA/HYGLOW ), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supplying and laying of 4 x 1.5 sq.mm. PVC insulated PVC sheathed copper conductor armoured control cable of 1.1 KV grade complete as required. (From Main Fire Control Panel to the Repeater Panel). (MAKE: Polycab/KALINGA/HYGLOW), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Providing and fixing of following size of black enamelled MS conduit in recess / on surface including all accessories, proper saddling at every 1200 mm intervals and hooks, where imbedded in the wall, MS junction / pull boxes, GI fish wire, complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Jindal make or equivalent or as approved by site engineer)

40 mm dia Conduit

32 mm dia Conduit

25 mm dia Conduit

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. (Polycab/Havells/Finolex or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Speaker cable Single pair, 2-core, 1.5 sqmm

SITC of Digital Hybrid IP-PBX System configured for 2 Analog Trunk Connectivity, 2 Digital Extensions, 100 Analog Extensions. It should be possible to reach the capacity of system to 240 analog and 999 IP users without any add-on CPU or chassis/hardware platform.It should support maximum 128 IP-TDM calls and 500 IP-IP calls (without transcoding in Relay RTP Mode) as and when required in the future. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. (Matrix/D-link or equivalent or as approved by the Engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Operator-cum maintenence console with large Backlit Display of 240x60 Pixels Graphic LCD, 4 Context Sensitive Keys,Built-in 16 DSS Keys,High Quality Full Duplex Speaker Phone Features Call Forward, Waiting, Transfer, Hold, Conference, Redial, Ringer Lamp. It Must have storage for minimum 20 calls per call log in the console itself. (Matrix/D-link or equivalent or as approved by the Engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Main Distribution Frame (MDF) with Integrated Protection Module (IPM) complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Matrix/D-link or equivalent or as approved by the Engineer incharge)

SITC of 3KVA UPS on line, ON LINE UPS 3KVA 1PH:1PH 72V MAX+SKU: 899-601-3001 | CATEGORY: ONLINE UPS Microtek High Frequency, provides Uninterrupted Pure Power for Critical Applications such as Computer Network, Servers, Cyber Cafes, ATM Machine, Labs etc. High Frequency and Double Conversion Online Technology, High End IGBT Based. & Micro Controller Based, Wide Input Voltage Range & Advanced PFC Technology, Advanced Battery Management & Battery Charging in UPS Off Mode, Short Circuit and Overload Protection & SNMP Card Slot (Optional), Smart RS232 Communication with monitoring software, Over Temperature Protection. & EMI / RFI Noise Filter, LCD/LED Display simultaneously & Generator Compatible Specially designed to suit Indian Power and Environment Condition, Isolation Transformer (Optional) & Different Output Voltage settings., Output, Frequency fixed at 50Hz or can be synchronized with Input Frequency., Static Bypass Enable, Disable & Outlets Programmable & Non Programmable, Protection from DC Fan failure & In-built Over Voltage Cut-Off Device, including 1 No. Exide SMF 12v 42Ah Battery for 30 mintues of backup (Make: Microtek/Emerson/ MITSUBISHI or equivalent), including carriage upto all lead and lift and as per direction of the Engineer in Charge.

SITC of Telephone instruments (Panasonic KX -TSC60SXB Black, Landline Phone), with necessary cable etc, complete as required, including carriage upto all lead and lift and as per direction of the Engineer in Charge. (Panasonic/Beetle/D-Link or equivalent or as approved by the Engineer incharge)

Providing and fixing HIKVISION IP 4MP COLORVU BULLET CCTV (DS-2CD1047G0-L) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V, One Year Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport. (Hikvision/Samsung/Sony or equivalent or as approved by the Engineer incharge)

Providing, fixing HIKVISION IP 4.0MP DOME NETWORK CCTV CAMERA (DS-2CD1343G0E-I) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V; One Year Warranty and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport. (Hikvision/Samsung/Sony or equivalent or as approved by the Engineer incharge)

SITC of HIKVISION IP 4MP 25X 100MTRS PTZ SPEED DOME CAMERA (DS-2DE4425IW-DE) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25X optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, one Year Warranty, as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent (Hikvision/Samsung/Sony or equivalent or as approved by the Engineer incharge)

SITC of HIKVISION 32 CHANNEL 4K H. 265+ NVR (DS-7732NI-K4), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160) resolution, incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port of 8TB each, including minimum length of 3mtrs Honeywell make or equivalent Ultra High Speed HDMI 2.1 Cable with Ethernet, Ultra High Speed HDMI Cable 48GBPS, Supports 3D/4Kx2K/8K Ultra High Definition @60Hz and NVR with one year Warranty complete and as directed by Engineer-in charge and specifications as required including carriage of material in all lead & lifts through mechanical & manual transport or its equivalent as approved by the Engineer in Charge. (Hikvision/Dahua/Samsung or equivalent or as approved by the Engineer incharge)

SITC of Power Supply ISI MARK including 1 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of following POE switch including 1 year maintenance as per required specifications as per direction of Engineer-in charge, including carriage of material in all lead and lifts through mechanical and manual transport, as approved by the Engineer in Charge.

HIKVISION 16 Port Giga PoE Switch Cat No. (DS-3E0518P-E/M) (Hikvision/Samsung/Dlink make or equivalent or equivalent)

HIKVISION 8 Port PoE Switch (DS-3E0109P-E/M) (Hikvision/Samsung/Dlink make or equivalent or equivalent)

SITC of DC Connector including 1 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport or its equivalent as approved by the Engineer in Charge.

SITC of Samsung 108 cm (43 inches) Crystal 4K Neo Series Ultra HD Smart LED TV UA43AUE65AKXXL (Black) including one year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport . (Samsung /Sony make or its equivalent as approved by the Engineer incharge)

Providing and fixing Polycab cctv 4+1 wiring for fixing of cameras in the surface / recessed medium class PVC conduit as per requirement & one year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport.

Providing Hard disk 8TB hard disk WD make including 1 year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport. (WD/Seagate or equivalent or as approved by the Engineer incharge)

Providing and fixing of Crotomak make 6U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex/Lepose make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Fire Fighting System Dry Type Providing and fixing of Fire bucket stand Minimax make item code I00000089 for 4 buckets with four nos. fire buckets Minimax make I00016356 MMX 10 Litre complete in all respect.or as per norms of fire deptt and including all lead and lift (Minimax/Ceasefire make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of Fireman Axe with Insulated Handle Minimax make item code I00003814 (Agni/Suraksha/Omex make) and including all lead and lift

Providing fixing, testing and commissioning PORTABLE ABC TYPE FIRE EXTINGUISHERS ”Minimax” Gas Cartridge Type Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Cat No. I00016798 MMX ABC 9 Kg IS:15683 Gas Cartridge (MAP 90) (Fire Rating 6A233B) Pure Polyester Powder Coated Body with internal and external coating, Forged brass valve with in bult Pressure Relief Device, Aluminium Siphon tube and diffuser for Dry Powder Models and Stainless Steel with Strainer for Water & Mechanical Foam Models, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual (Minimax/Ceasefire make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing fixing, testing and commissioning of PORTABLE STORED PRESSURE FIRE EXTINGUISHERS Minimax make I00014861 MMX Foam Based Watermist Low Pressure Fire Extinguisher 9L - IS:15683 (Fire Rating 4A, 75F 233 Stored Pressure Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Epoxy Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual (Minimax/Ceasefire make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing fixing, testing and commissioning PORTABLE CO2 TYPE FIRE EXTINGUISHERS ”Minimax” Carbon Di-oxide agent Type Fire Extinguisher, I00006119 MMX CO2 4.5 Kg IS:15683 (Squeeze Grip Valve) (Fire Rating 55B )ISI Marked (IS15683:2018), CE and EN Certified, Containing CO2 gas having purity 99.7% filled in Seamless Cylinder having approval from Petroleum and Explosives Safety Organisation (PESO), coated with High Glossy PU Paint, ISI marked Dual Spindle Valve with Aluminum Wheel & Collar / Squeeze Grip brass valve, Aluminium Siphon tube, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual. (Minimax/Ceasefire make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing, fixing, testing and commissioning MODULAR TYPE CEILING MOUNTED FIRE EXTINGUISHERS Minimax make item code I00007135 MMX SP 5 Kg : Modular (MAP 90) Modular Ceiling Mounted ABC Powder Type Fire Extinguisher, CE Certified, Pure Polyester Powder Coated Body, Forged brass valve with in bult Pressure Relief Device, Non Return Valve for pressure gauge port, Large Dial pressure gauge and Thermo bulb having release temperature of 68°C, High durablility Vinyl label (3M make), QR Code label with printed serial number. (Minimax/Ceasefire make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

Supply and commissioning of 320 KVA silent type DG set Cat No. CS320D5P, Cummins engine make Cat No. QSL9-G15 Engine BHP 399, 320 KVA Cummins, Cummins ® ‘855 seriesDiesel Generator, Alternator Stamford brushless alternator, Self-excited, self regulated, Class ‘H’ insulation, Salient pole revolving field, Single bearing, Automatic voltage regulator, Accessories Stamford brushless alternator, Silencer suitably optimized to meet stringent sound emission standards laid down by MOEF / CPCB, Base rail with integral fuel tank (520 litres capacity) is provided with drain plug, air vent, inlet and outlet connection, level indicator, manhole etc. 2 x 12 V dry, uncharged batteries with connecting leads and terminals, Acoustic enclosure, Specially designed to meet stringent MOEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp, Powder coated for long lasting service life and superior finish, With UV resistant powder coating, can withstand extreme environments, Use of stainless steel hardware, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Standard scope Engine: Cummins® ‘NTA 855 G2’, direct injection, water cooled engine, 6 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046/BS 5514 with specifications like Cummins PT Fuel Pump, Holset turbocharger, Stainless steel exhaust flexible coupling, Silencer, Radiator, Coolant inhibitor, Lube oil cooler, Cartridge paper filters, fuel and lube oil, Dry-type replaceable paper element air cleaner with restriction indicator, Flywheel housing and flywheel to suit single bearing alternator, Electrical starter motor, Battery charging alternator, Electronic control panel with Electronic Governor (ECPG), Engine protections (Shutdown), High water temperature, Low lube oil pressure, Overspeed, First fill lube oil, Control panel Powder coated control panel manufactured with 14/16 gauge CRCA sheet provides: MCCB of suitable rating with overload and short circuit protection Combined meter for KW, kVA and PF, KWh meter, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing terminations, Indicating lamps for “DG On” and “Load On” Instrument fuses/ MCB duly wired and ferruled, Engine Coolant heater with thermostatic switch, lube oil heater and digital electronic governor, Alternator Thermistors, space heater, Control panel : AMF control panel, battery charger, remote/ auto start panel, auto/ manual synchronizing panel, audio-visual annunciation and indication lamps for engine faults Others: Mobile sets with canopy with cold start ki including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply and fixing of Rubber insulation matt 2mtrx1mtrx12mm to prevent electric shock as reqd complete in all respects including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, installation, testing and commissioning of following MS exhaust pipe medium duty class-B complete with all accessories such as bends flanges,gasket, flexible connections at a suitable distance and supporting arrangement as required at site including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, erection and testing of ornamental light Alliance Small fixture containing two no. 40W LED lamp on 3350mm high cast aluminium pole (Polyester/PU Painted/ Black/Antique finish) Twinkle make cat no. LuxMax AUSTIN Pole with BKT-102 (DOUBLE ARM) for road side and landscape lighting in position on M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the. flushing the ground level, including supply and fixing of 2nos 4cX 4\6\10 sqmm AL.Armd cable gland, 1 no. 10 AMP. SP MCB with din bar arrangement and earthing links complete in all respect and two nos. 40 w LED lamp with one coat of paint and Himachal Tourism logo engraved at the base of the pole Complete in all respect. (Twinkle/Bajaj/K-Lite make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, erection and testing of ornamental pole 3000 mm high, cast aluminium, polyester/PU painted Black, LuxMax IMPERIAL-E Pole, Twinkle Make for road side and landscape lighting in position on required M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the. flushing the ground level. The pole should be hot dip Galvanized in single dip to average 65 micron DFT. including supply and fixing of foundation bolts (600mm length), with 1 no. 6 AMP. SP MCB with din bar arrangement and earthing links, 2nos 2cX 6 sqmm AL.Armd cable gland and Himachal Tourism logo engraved at the base of the pole complete in all respect and with one coat of paint Complete in all respect or as approved by site incharge. (Twinkle/Bajaj/K-Lite make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying and fixing of Ornamental Light LED POST TOP - SQUARE Small, LuxMax-PT-164 40Watts (or equivalent), 700mm in height and 295mm in Width, warm white colour as required (Twinkle/Bajaj/K-Lite make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Fire Fighting System Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required and including all lead and lift (Jindal make or equivalent or equivalent or approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

25 mm dia pipe

32 mm dia pipe

50 mm dia pipe

65 mm dia pipe

80 mm dia pipe

100 mm dia pipe

150 mm dia pipe

200 mm dia pipe

250 mm dia pipe

Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 450 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 250 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing of Minimax make item code I00016324 MMX Fire Hose Type 1-30M length with Gun Metal Coupling ISI marked non-percolating flexible firefighting two layered delivery hose, synthetic fiber circular woven jacketed, bearing IS:636-2018, 63 mm dia, complete with instantaneous male & female coupling (IS:903) and Copper Wire binding. (Minimax make or equivalent or equivalent or approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing Minimax make item code I00003810 Hose Reel Drum With GM Nozzle & Rubber Hose - 30M Swinging Hose reel Type-A, Wall Mounted with 180° swing, specifications as per IS-884: latest revision made of high quality mild steel, powder coated in red colour. Maximum operating pressure 10 bar, Flow rate 22.5 lpm at 7 bar pressure (Minimax make or equivalent or equivalent or approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessoSupply, installation, testing & commissioning of : Minimax make item code I00004037 Single Hydrant Valve - Gun Metal ISI marked, Inlet 80mm & Outlet 63 mm Instantaneous, ABS Blank Cap, Hydraulic Test Pressure 21 kg/cm2 for 150 sec, Flow Rate 900 LPM at 7 kg/cm2 (PCD:160 mm, Holes: 4 nos. x 19mm, Flange: 200mm x 12 mm thk)ries as per IS: 5290-1983 (Type 'A') and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Minimax make or equivalent or equivalent or approved by the engineer incharge)

Providing & fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box and Fire Duct Door (900mmx1200mm) for MS pipe, Hose pipe, Hose Reel Drum, Fire Extinguisher complete as requried and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Minimax, Genric make or equivalent or equivalent or approved by the engineer incharge)

Fire Hose Cabinet (30''x24''x10'')

Fire Duct Door (900mm x 1200mm)

Providing and fixing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 Minimax Make item code I00003796, Four Way Collecting Breaching Head - PCD 240mm and including Minimax make item code I00003822 Short Branch Pipe with 20mm nozzle, 63mm Inlet & 20mm Outlet, IS:903 - Gun metal and necessary support complete in all respect including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Atasi make or equivalent or equivalent or approved by the engineer incharge)

Four Way

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm and including all lead and lift (Zoloto make or equivalent or equivalent ISI mark) complete in all respect and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

50 mm Dia

65mm Dia

80 mm Dia

100 mm Dia

150 mm Dia

200mm Dia

250mm Dia

Providing and fixing Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect and including all lead and lift (Zoloto make or equivalent or equivalent ISI mark) complete in all respect and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

50 mm Dia

65 mm dia

80 mm dia

100 mm Dia

150 mm Dia

200mm Dia

250mm DIa

Supply, Installing, testing and commissioning of 100 mm dial type pressure gauge gate valve with all accessories as requried and including all lead and lift (Zoloto make or equivalent or equivalent ISI mark) complete in all respect and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Pressure switchs for Main, Jockey, and stand by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Kirloskar Make pump Modal DB 80/26 Electrical Motor Driven Automatic pressurisation (Main PUMP) pumping set consisting of the following as per specifications. Horizontally mounted centrifugal type single/multi-stage fire pump capable to deliver approx 2280 LPM against a total head of 70 M, having cast iron body. bronze impeller, stainless steel shaft and complete with b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts + 10% - 15% 3 phase. 50 HZ A.C. supply of suitable capacity (approx. 45 KW, 60 HP) for the above pump with synchronous speed of 2900 RPM confirming to & duly coupled with above pump coupled with flexible coupling including as per relevant Indian Standard and specifications and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.(Make KIRLOSKAR/ Crompton equivalent or as approved by the engineer incharge)

SITC of Diesel Engine Driven Fire Pumping set suitable for automatic opreation consisting of the following as per specification. A) Horizontally mounting,centrifugal type single/multi-stage fire pump having cast ironbody, bronze impeller,stainless steel shaft &capable of delivering 2250 LPM against a total head of 70M complete for perodical testing of thepumping set of the pumping set as per TAC rules. b) Water cooled TAC approved Diesel Engine suitable for the developing at least 72 BHP at 2150 RPM) for above pumping complete with autmatic starting mechanism, batteries,automatic battery charger unit,flexble coupling withthe pump,coupling with the pump,fuel tank, asper TAC rules including earthing,mandatory spares and tool kit. c) Common bed plate for mounting pump and Engine fabricated of suitable MS channel as per manufacturer recommendations. (Make KIRLOSKAR/ Crompton equivalent or as approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing PVC water storage tank (SINTEX 3 layer) of ISI: 1270 marked G.I. intel and outlet connections, 25mm nominal bore Elbo, Tee, socket, Tank nipple, float ball valve and mosquito proof PVC cover with locking arrangement (Heavy Duty) including hoisting upto all height above ground level including carriage of materials upto all lead & lift and as per direction of Engineer-In-Charge. (50000 Ltr). (Sintex/Supreme/Vectus make or equivalent or equivalent or as approved by site engineer)

Providing fixing, testing and commissioning of 15mm dia chorme furnished sprinkler head with quartz type bulb, set to opreate at 68 degree Celsius complete as per specification, sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing fixing, testing and commissioning flexible sprinkler hose 25mm dia chrome, 1 set rode, 3 clamp, 1 nipple 25mm dia, 1200mm and 1500mm length as per required at site complete as per specification. Sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (ISI OR ANY STANDARD make)

Providing & fixing UL/FM listed powder coated firnish Escutcheon plate for sprinkler complete include fixing in position on pipe and celling complete in all respect. (9 Size=15 NB) (ISI OR ANY STANDARD make) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, installing, testing and commissioning of D-Link DIR-3040 AC3000 High-Power Wi-Fi Tri-Band Gigabit Router, Wi-Fi 5 (802.11AC) Technology with speeds of up to 400 Mbps (2.4 GHz) + 866 Mbps (5 GHz) + 1733 Mbps (5 GHz), Six High gain exteanal Antennas for Extended coverage, 4 x 10/100/1000 Mbps Gigabit Ethernet LAN ports, 1 x 10/100/1000 Mbps Gigabit Ethernet WAN port, 1x USB 2.0 & 1x USB 3.0 port to connect USB storage and create network storage, Works with the Google Assistant and Alexa – Voice Control with Google Assistant or Alexa. (D-Link) equivalent or as approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, installing, testing and commissioning of TP-Link RE300 AC1200 Mesh Wi-Fi Range Extender/WiFi Booster/Wireless Repeater (Up to 1200 Mbps), Intelligent Signal Light, Power Schedule, LED Control, Dual Band (D-link/TP-link/Cisco make or equivalent or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, installing,testing and commissioning of Electic Vehicle Charging Station ‎EVCARS EV Charger Level 2, 40 Amp Portable, Evse Home Electric Vehicle Charging Station with EV Charger Plug Holder and Cable Holder, Timing Delay (SAE J1722, 230V, 16A-40A, NEMA 14-50) with 3 years warranty (EVCARS, Kazam or equivalent or as approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of outdoor Wall UP-Down Light Lupus Wall Light 2x3W Jaquar Make Product Code: LWWL03X203XW Die cast aluminium housing, Opal polycarbonate diffuser, Matt grey finish , Warm white, IP54, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.(Jaquar/Havells/Wipro make or equivalent or as approved by site engineer)

SITC of Alpha Wall Washer Light Color Anthracite finish, Material Premium Aluminium Warm white Philips make Model No 58162, 12Watts IP54 including making connections, testing etc. (Philips/Jaquar/Wipro make or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Indoor Led Strip LSTP03X008XM 40W, 8W/Mtr Indoor Strip Light (1Pack of 5 Mtr), IP20, Jaquar Make RGB in Colour LED Strip for Cove/facade Lighting including drivers Cat No. LDRV01S048XX for Indoor Power Supply 48W (24V), for suitable for installing in cove, ceiling and inner facade or as approved by site engineer. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. (Jaquar/Havells/Wipro) make or equivalent or as approved by site engineer including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Outdoor Led Strip LSTP04X008XM 40W, 8W/Mtr Outdoor Strip Light (1Pack of 5 Mtr) , IP65, Jaquar Make RGB in Colour LED Strip for Cove/facade Lighting including drivers LDRV02S048XX for Outdoor Power Supply 48W (24V), for suitable for installing in cove, roof and outer facade or as approved by site engineer. The work involves assembly, fixing, connecting, commissioning and testing of the Led strip. (Jaquar/Havells/Wipro) make or equivalent or as approved by site engineer including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of Metal Bulk Head Jaquar make cat No. LBLK02X010XW, 10Watts, WW in Colour, Length: 193 mm Width: 118 mm, Height: 56 mm complete with all accessories including making connections as required (Havells/Philips/Wipro make or equivalent or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, Installation, fixing and commissioning of Automatic Digital TYRE INFLATOR with built in DIGITAL INDICATING PRESSURE CONTROLLER FOR INFLATION OF TYRES, Digital Automatic Tyre Inflator, Model: Setair- 115 KPEI with Dual LED display with Air Tower and IRAPL 3HP Single phase Cast Iron Reciprocating Air Cooled, Air Compressor Mounted on 160 Ltrs Tank Capacity Air Receiver with Electric Motor & Starter with Auto cut-off setting including foundation work and necessary excavtation and one year Warranty with one year calibration certificate as required or as approved by site engineer. (Maruti or equivalent or as approved by site engineer) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supplying, Installation, fixing and commissioning of Swimming Pool Heating System complete including , but not limited to Swimming Pool Heater Specification : Herambh coolingz make or equivalent Model No. SPWH 42: Minimum specification of Input 7 kW 440 Volts Out Put 42 kW*, Model No. MAGMA SPWH 42 , Power supply(V/PH/HZ) 415 / 3 / 50, Heating in kW 42.00, Heating IN KCAL /HR 37,500, Input power（KW）without Pump 7.0, COP with Pump & Fan 6.00 , Running current（A)16.87, Hot Water/Hr δT of 30C 12,050, Max outlet Water Temp 0C 32, Ambient Temp running 0C 8 to 40, Water connections (Inch) 2.0”, No of Compressors 1, Type of Compressor Scroll, Make of, Compressor Emerson, No of Fans 2, Type of Fan Exhaust, Noise db A 72, Dimensions in MM ( Length x Width x Height ) 1625 x, 750 x 1100, Weight (Kg) 300, Refrigerant R 407c, Unit Structure GI Sheetmetal, Heat pump should have the following: Micro processor Controlled Digital Temperature Controller, High Pressure safety cut-out , Low pressure cut-out, Compressor Motor Over-load protection. Filters Specification : WATERTECH SYSTEMS make or equivalent Swimming Pool FRP Bobbin Wound Filter Minimum specification of 525mm dia With Sand & Multiport Valve Top Mount Max Flow Rate 12000ltr/hour, Heavy Duty Trolley, 1.5 hp swimming pool Pump, Capacity 20000 LPH, Swimming Pool UV System : EURO UV Tech make or equivalent, Swimming pool Heat pump : Austin make or equivalent mininum specification of 2 HP Swimming Pool Motor Pump make Motor : Asynchoronous, two poles, IP 55 protection, Class F insulation and Continuous operation, Single phase version built-in thermal protection, Material: Pump body, pump foot and diffuser in glass loaded polypropylene, Impeller in PPO, Seal mounting in glass loaded polyamide, Motor shaft in stainless steel AISI 420, Mechanical seal in graphite and steatite, Motor housing in aluminium L-2521, Bypass Valve : Pentair make or equivalent model No. 263037 Minimum specification of 3-Way PVC 1-1/2 inch (2 inch Slip Outside) Pool and Spa Diverter Valve) and including Swimming pool cleaning items specification : WATERTECH SYSTEMS make or equivalent Minimum specification of Swimming Pool Skimmer Net Rubbish Cleaning Rake Leaf Mesh Deep Bag Net, Cleaning Brush 18", Vacuum Hose 30 Feet, Vacuum Head 17.5" (Swimming Pool Cleaning Set) complete and WATERTECH SYSTEMS make or equivalent Minimum specification of Swimming Pool Cleaning Vacuum Set : 1 HP Pump, 15 m EVA Hose Pipe, 18 Inch Portable Vacuum Head, Trolly, Telescopic Rode 8+8 ft, 18-inch Curved Brushes, PH Test Kit, Net and including Swimming Pool Led Lights Austin make or equivalent Minimum specification of Body Material : Stainless Steel, IP68, Wattage : 12W, Polished type Electro polished Shape Round, Color Temperature 2700-3000K, Wiring : Polycab make XLPE Insulated or equivalent cable Minimum specification of PVC Sheathed Industrial 3 Core Flat Submersible Cable with Bare Bunched Copper Conductor with Voltage Grade 1100 Volts as per IS:694/2010 and necessary inlet and outlet valves, nozzles, waste cover and specified as approved by site engineer including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

SITC of following RFID Door lock items complete in all respect including all accessory, connections and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

RFID DOOR LOCK Dolphy make Model No. DHDL0002-G, Colour: Black and Golden, Finish: Matt, Material: Extruded Aluminium, Unlock: RFID Card/Mechanical Key, Battery: 4-AA Alkaline Batteries, Thickness: 38-50mm complete with connections. (Dolphy/Godrej/Dorset or equivalent or as approved by the engineer incharge)

USB ROOM CARD ENCODER Dolphy make Model No. DHDL0007, (Dolphy/Godrej/Dorset or equivalent or as approved by the engineer incharge)

HANDSET (WIRELESS PORTABLE PROGRAMMER) Dolphy make Model No. DHDL0006, (Dolphy/Godrej/Dorset or equivalent or as approved by the engineer incharge)

MIFARE CARD FOR UNLOCK DOOR Dolphy make Model No. DHDL-CARD, (Dolphy/Godrej/Dorset or equivalent or as approved by the engineer incharge)

SITC of Godrej VigiGuard make Automatic Boom Barrier, Material: Stainless Steel, Barriers: Automatic Boom Barrier 6 Mtr with Boom Stand, Optical Sensor, Remote & Flash Light, Duty Cycle: 100% Intensive Use, Maximum Boom Length 6 Mtr, Controller Protecting Rating: IP54, Model Name/Number GVB6, Height of Boom from Ground (Approx. mm) 875, Housing Dimensions (Approx. mm) 300x325x1060, Boom Dimension (mm) 90x32, Control Panel Power Supply (V) 230 A.C., 50/60 Hz, Motor Power Supply (V) 24 D.C, Power (W) 100df, Opening Time (Sec) 1 to 2, MCBF: 5 Million Cycle, Housing Thickness: 2mm thickness for higher strength and reliability, Smooth Operation: ABS brake control system for No bounce/jerk of boom at end positions, Better Visibility: White aluminium boom bar with reflective strips and RAL 7012 powdercoated housing, IP54 Protection: Control unit is IP – protected making it dust and water resistant, Optical Beam Sensor: Safety device to detect presence of vehicles and reverse barrier movement, Access Control Operation: Barrier operated through push button switch and can also be operated through access control system, Manual Operation in case of Power Failure: Barrier can be raised or lowered by releasing the barrier lock, Bar with Protective Rubber Profile: To prevent injury on case of any contact, Circular Boom Section: boom profile used in case of a windy area, Loop Detector: Safety device to detect presence of vehicles and reverse barrier movement, Flash Light: To indicate traffic at the entry/exit location, Folding Arm: boom profile for used in case of ceiling height constraints in the area and keypad/remote if required complete in all respect including all accessory, connections and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.(Godrej/FAAC/ZKTeco or equivalent or as approved by the engineer incharge)

SITC of Solar power plant Luminous make Model No. NXi 315, 15KW Solar Panel System, Solar On Grid Combo - 15KW, Net Weight (Kg) Inverter - 37 kg, Panel - 20 kg, Phase: Single Phase, UPS: NXi 315, PV Panel: 325 Wp x 50 Nos, Technology (Solar) Without Battery, Inverter with warranty- 2 years, Wattage (Wp) 325, Panel Type Poly Crystalline, Product Dimensions (L*W*H) Dimensions in mm: UPS-“ 339*565*172, Panel -“ 1976x991x40, DC input Range (V) 60-130, Max. supported panel power (Wp) 270, Rated AC power (W) 230V, 8.6A, Single phase, Usable current from grid (A) 24, Max Solar Panel Voltage (V) 37.39, Nominal DC 48, including all Solar Panels, inverter, UPS, DC Distribution box, Surge protectors, AC Distribution box, required Circuit Breakers, Control wires, Power Supply, Connection Cables, required Earthing and necessary foundation or necessary aluminium support channels as per the site condition, complete in all respect, including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Luminous/Tata/Microtek) make or equivalent or as approved by the engineer incharge.

SITC of Solar power plant Luminous make Model No. NXi 325, 25KW Solar Panel System, Solar On Grid Combo - 25KW, Net Weight (Kg) Inverter - 37 kg, Panel - 20 kg, Phase: Single Phase, UPS: NXi 325, PV Panel: 325 Wp x 84 Nos, Technology (Solar) Without Battery, Inverter warranty - 2 years, Wattage (Wp) 325, Panel Type Poly Crystalline, Product Dimensions (L*W*H) Dimensions in mm: UPS-“ 339*565*172, Panel -“ 1976x991x40, DC input Range (V) 60-130, Max. supported panel power (Wp) 270, Rated AC power (W) 230V, 8.6A, Single phase, Usable current from grid (A) 24, Max Solar Panel Voltage (V) 37.39, Nominal DC 48, including all Solar Panels, inverter, UPS, DC Distribution box, Surge protectors, AC Distribution box, required Circuit Breakers, Control wires, Power Supply, Connection Cables, required Earthing and necessary foundation or necessary aluminium support channels as per the site condition, complete in all respect, including all accessory and including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. (Luminous/Tata/Microtek) make or equivalent or as approved by the engineer incharge.

SITC of DIGITAL 13 WAVE FIN OFR, Digi Black 2500 W, Havells Make, Heat setting 3 Power Settings – 1000 W, 1500 W & 2500 W, Fins: Large surface wave fins for faster heating, Heating Oil: HD320 grade Oil for long lasting & better efficiency, Safety: Over heat protection, Safety: Tilt over switch for safety, complete in all respect (make Havells/Bajaj/Usha or equivalent or as approved by the engineer incharge) including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Supply Installation, Testing & commissioning of Air Conditioner of Blue Star Make DNU-INVERTER AC, 5 STAR, 1.5 TON, Series Name: DNU, (Rated) Voltage/Frequency/Phase230 V / 50Hz / Single Cooling Capacity (Watt)(Min~Max)5000 (1880 ~ 5300), Cooling Capacity (BTU/hr)17060, Rated Cooling Capacity (50% Load) (Watt)2500, Cooling Rated Power Input (Watt)1315, Cooling Capacity (BTU/hr)(Min~Max) 17060 (6414.5 ~ 18084), Cooling Power Input (50% Load) (Watt)447, ISEER5.02, Electricity Consumed In 1600 Hours. (Units/Year)770.98, Nominal Current, (Cooling)(Amps)6, Air Flow Volume (Wet CFM) (High / Medium / Low)580/461/307/264, Noise Level Indoor (dB(a)) (High/ Medium/ Low) 57.4/52.7/45.7/44.8, Moisture Removal (Litres/Hour)1.3, Compressor TypeInverter Rotary, Acoustic Jacket On CompressorYes, Refrigerant Quantity(Kg)0.95, Ambient Temp (Cooling) (degree C)54, RemoteLCD Remote with Display, Night Glow Function On Remote Buttons, Net IDU(Product) Dimension (mm)960 x 320 x 215, Input Power SupplyIndoor Unit, Net Weight IDU (kg)11, Net ODU Dimensions (Width X Depth X Height) (mm)888.4 x 367 x 581.5, Net Weight ODU (kg)27.5, Noise Level Outdoor (dB(a))60, Gross IDU Weight (kg)12.5, Gross ODU Weight (kg)32.5, Suction Tube Size Outer Diameter Inch (mm)1/2" (12.7mm), Liquid Tube Size Outer Diameter Inch (mm)1/4" (6.35mm), Max Piping Capability Total (metre)15, Max Piping Capability Vertical (metre)10, Refrigerant Additional Charge Beyond 4M (g/m)15, Power Supply to ODU Source(Core/Gauge)4C * 1.5sqmm, Power Supply to IDU Source(Core/Gauge) 3C*1.5sqmm, Remote Battery TypeAAA, Product TitleDNU | Inverter, AC | 5 Star | 1.5 Ton, Features Refrigerant R32, Features Condenser Type100% Copper, with required Voltage Stabiliser, Indoor Unit, 1 Outdoor Unit, Inter Connecting Pipe, 1 Remote, Manuals, 1 Warranty Card (MAKE: Voltas/LG/Samsung or equivalent) including carriage upto all lead and lift and as per direction of the Engineer in Charge.

Supply Installation, Testing & commissioning of Air Conditioner of Blue Star Make DNU-INVERTER AC, 5 STAR, 2 TON, Series Name: DNU, (Rated) Voltage/Frequency/Phase230 V / 50Hz, Single Cooling Capacity (Watt)(Min~Max) 6100 (2702~6357), Cooling Capacity (BTU/hr) 20847, Rated Cooling Capacity (50% Load) (Watt)3050, Cooling Rated Power Input (Watt)1555, Cooling Capacity (BTU/hr)(Min~Max) 20847(9219~21690), Cooling Power Input (50% Load) (Watt)555, ISEER5.05, Electricity Consumed In 1600 Hours. (Units/Year)935.8, Nominal Current (Cooling)(Amps)7.1, Air Flow Volume (Wet CFM) (High / Medium / Low)790/662/584/467, Noise Level Indoor (dB(a)) (High/ Medium/ Low)52, Moisture Removal (Litres/Hour)1.3, Compressor Type Inverter Rotary, Acoustic Jacket On Compressor, Refrigerant Quantity(Kg)0.99, Ambient Temp (Cooling) (degree C)54, Remote: LCD Remote with Display, Night Glow Function On Remote Buttons: No, Net IDU(Product) Dimension (mm)1110 x 215 x 335, Input Power SupplyIDU, Net Weight IDU (kg)15, Net ODU Dimensions (Width X Depth X Height) (mm)968 x 367 x 689, Net, Weight ODU (kg)34.8, Noise Level Outdoor (dB(a))58, Gross IDU Weight (kg)18, Gross ODU Weight (kg)41, Suction Tube Size Outer Diameter Inch (mm)5/8" (15.88mm), Liquid Tube Size Outer Diameter Inch (mm)1/4" (6.35mm), Max Piping Capability Total (metre)15, Max Piping Capability Vertical (metre)10, Refrigerant Additional Charge Beyond 4M (g/m)15, Power Supply to ODU Source(Core/Gauge)4C * 2.5sqmm, Power Supply to IDU Source(Core/Gauge)3C * 2.5sqmm, Remote Battery TypeAAA, Product Title DNU | Inverter AC | 5 Star | 2 Ton, Features RefrigerantR32, Features Condenser Type100% Copper, with required Voltage Stabiliser, Indoor Unit, 1 Outdoor Unit, Inter Connecting Pipe, 1 Remote, Manuals, 1 Warranty Card (MAKE: Voltas/LG/Samsung or equivalent) including carriage up to all lead and lift and as per direction of the Engineer in Charge.

Supply Installation, Testing & commissioning of Mitsubishi Make Cassette Unit, 2 Ton, Indoor Unit Cat No. PLY-SP24EA, Outdoor Unit Cat No: SUY-SA24VA2, Nominal Capacity 2 Tr, Star Rating - As Per BEE 4 Star, Cooling Capacity(Min-Max) 7.1(2.9-7.1) KW, Total Input 2.17kW, Power Supply (Indoor) 1ph 220-240V 50Hz, Power Supply(Outdoor) 1ph 220-240V 50Hz, ISEER(W/W) 4.50, EER (W/W) 3.27, Air Flow Volume(CFM)(Low/Med2/Med1/High)-Indoor 565/635/740/810, Air Flow Volume(CFM)-Outdoor 1625, Guaranteed Operating Range Upper Limit(DB) 52, Guaranteed Operating Range Lower Limit(DB) 18, Noise Level Indoor (Low/Med2/Med1/High) In dB(A) 28/31/34/37, Noise Level Outdoor In dB(A) 52, Refrigerant R410A, Indoor unit Dimensions (H x W x D)(panel) mm 258(40)x840(950)x840(950), Weight(panel) kg 21(5), Outdoor unit Dimensions (H x W x D) mm 880x840x330, Weight kg 49, Ext.Piping Diameter Liquid mm (inches) 9.52, Diameter Gas mm, (inches) 15.88, Max Piping length m 30, Max. height difference m 15, with required Voltage Stabiliser, Indoor Unit, 1 Outdoor Unit, Inter Connecting Pipe, 1 Remote, Manuals, 1 Warranty Card (MAKE: Mitsubishi/Daikin/LG or equivalent) including carriage up topto all lead and lift and as per direction of the Engineer in Charge.

SITC of following items complete in all respect, including all accessory and all lift and lead and approved by the engineer incharge

First aid box (Dimension in cms - L x B x H - 23.6 x 15.3 x 14 make (MILTON/Plantex/Cello Medical Box With Handle)

Danger Notice Plate installable through bolting, base made up of Stainless Steel with required Marking/Text/Materials painting on it as per specifications. Minimum weight of plate shall be 125gm. (MYSIGN/Signoogle/ Flambird Silver danger sign board nameplate (6inch X12inch ))

Electric Shock & Management Chart Size (50 x 70 cm Language : Hindi-English Combined. The chart Should provide information on how to perform first aid in case of electic shock. Multicolour printing on 80 GSM map litho paper. The chart should be laminated on both sides with 30 micron thick plastic film making it tear & water resistant with suitable frame and galss covering. The chart should be ideal for putting up on a wall or a board.) (make Vidya Chitr Prakashan/teachingnest or equivalent or as approved by the engineer incharge)

All Electrical Test Report for complete Electrical Installation of equipment installed under the project (including DG Commissioning report, Fire Fighting installation report & NOC, Fire Alarm System installation report, Lift installation report & NOC(if applicable) and other equipment test report cards and warranty cards)

Provisional sum The comparison of bid shall be done exclusive of provisional sum. The cost shall include cost of Environmental testing etc. a handling fee of 5% (five percent) shall be payable to the contractor on the actual cost of any approved expenditures under as Provisional sum items. 1 Per Job Amount 604000

SUNEHARI BAGH BUILDERS PVT. LTD. (BID ID -435557)

A S ENTERPRISE (BID ID -435504)

UNIPRO (BID ID -435595)