Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta.Jhagdia , Valia and Netrang of Bharuch District for One Year.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with

latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Jhagadia, Valia and

Netrang of Bharuch District for One Year.

Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board, Surat.

Jal bhavan,Adajan, Surat -395009

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Jhagadia,

Valia and Netrang of Bharuch District for One Year.

Schedule showing the material to be supplied from the store of GWSSB for the work

contracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. Rate Rs. Unit Place of

No. Delivery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled material

satthe rate of current SOR from contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Jhagadia,

Valia and Netrang of Bharuch District for One Year.

Particulars Qty Rate Per Amount

Providing light commercial (medium) four wheeler

Diesel vehicle on rental basis for one day

(particularly for H.P repairing works) with Driver &

1 POL(Per day) (The vehicle shall be fully insured 18 99242 Team

with fitness certificate & PUC) with 01 Semi skilled

Labour (Per day) & 03 Unskilled Labour (Per day)

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with

A-1 Hexa.Nut M-12x1.75 & Washer 4mm thick 1250 5.56 Set

A-2 Hex. Bolt M10x1.50x40 mm long 300 2.58 No

A-3 Nylock Nut M10x1.50 300 1.72 No

A-4 Handle Axle(Stainless Steel) 250 73.92 No

A-5 Washer (4 mm thick) for Handle Axle 150 1.29 No

A-6 Bearing (No.6204-Z) 650 27.63 No

A-7 Spacer(for pump Head) 10 4.26 No

A-8 Chain with Coupling 450 68.32 No

A-9 Bolt for front cover M-12x20 mm long 200 2.27 No

A- Pump Head Assly.Consi.of Item No.(1) to (7)

10 as per Fig.3.1

(B) SPARES FOR CYLINDER

B-1 Pump Bucket 1000 4.63 No

B-2 Sealing Ring 1000 3.00 No

B-3 Upper Valve Assly comp. consi.of item as 200 357.50 Set

Volume III: Price bid Page

per fig 3.6 A (Part no 1 to 4 & 8 to 9)

Lower Valve Assly comp.consi.of item as per

fig 3.6 B (Part no 5 to 7 & 10)

WATER TANK consi.of item as per fig 3.6 B

Cylinder With Brass Liner consi.of item (a)

(E) REDUCER CAP 300 69.54 No

(F) Spares for Conne. Rods

F-1 Hexagonal Coupler M-12 x 1.75 x 50mm 100 6.61 No

(G) UPPER VALVE ASSEMBLY SPARES

G-1 Upper Valve Seating 200 1.53 No

G-2 Plunger Yoke Body 0 111.25 No

G-3 Bucket Spacer 0 86.25 No

G-4 Follower 0 104.88 No

G-5 Plunger Rod (S & S) 50 87.58 No

G-6 Upper Valve (Guide) 200 47.50 No

(H) LOWER VALVE ASSEMBLY SPARES

H-1 Check Valve Seat 0 80.66 No

H-2 Check Valve 50 66.25 No

H-3 Check Valve Seating 200 2.29 No

H-4 Rubber Seat Retainer 0 36.63 No

Handle Bar consisting of Item no (1) & (3) as

Cylinder Assly Comp.consisting of Item no

(1) to (7) as per Fig

Conn. Rod Electro Galva.consisting of Item

no (1) to (3) as per Fig

Special Tool Kit for I. M.-II Handpump Consi.

(L) Item (1) to (11) as per IS 15500 0 6249.60 Set

Part-8 with tool box

Standerd Tool Kit for I. M.-II Handpump

(M) Consi. Item(1) to (16) as per IS 15500 0 6340.32 Set

Part-8 with tool box

Third plate consisting of Item (1) & (2) as per

Spares for deep well Hand pump-Extra

Cylinder Body with Brass Liner consisting of

O-1 Item no (1) for body fig 5.2 & (2) 0 525.60 Set

for brass linear Fig 6.1 B

Handle Bar consisting of Item no (1) to (3)

O-3 Upper Valve Assembly complete consisting 0 570.00 Set

Volume III: Price bid Page

of Item no (1) to (11) as per Fig

O-4 Follower as per Fig 6.7 0 161.25 No

O-5 Bucket Spacer-Lower as per Fig 6.5 0 75.21 No

(P) Pedestral of Telescopic Stand Assembly 20 1613.76 No

Manufacture Supply & Delivery of ISI Marked

mm dia medium quality galvanized mild steel

tubes (Continuously welded electric resistance

welded (ERW)/high frequency induction weled

(HFIW) /Hot finished welded (HFW) type screwed

at both ends to IS:554/ 1985 for pipe suitable for

water and gas application, socket on one end and

other end protected with plastic thread protector

in approximate length of 3 mtrs conforming to

IS:1239 (Part-I) 2004 With latest amendment and

socket to conforming to IS:1239 (Part-II)

With latest amendment

3.1 32mm Dia GI Coupling 50 24.15 No

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 33,20,644.90 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Executive Engineer,

Signature of Contractor P.H. Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with

providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,

Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS

with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Jhagadia,

Valia and Netrang of Bharuch District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page