Electrical Work-CSPZ

Amount

Provision of New Distribution panels

OD7169/2023-2024:S,I,T,C of MV cubical type Panel suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC supply system fabricated in compartmentalised design from CRCA sheet steel of 2mm thick ( 1375 X1900 X 400 mm approx.) for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing floor mounted complete with 7 tank process for powder coating in approved shade, having 300 Amps capacity extensible type FP Aluminium Alloy bus bars of high conductivity DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 75mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switch gears. INCOMER 250A FP 36KA MCCB With Thermal Magnetic base O/L, S/C protection Release - 1 no Extended Rotatory Handle, Spreader- 1 no 6A SP 10KA MCB - 4 no Digital Multifunction Meter with Rs485 no Port EM6436- 1 no R,Y,B Phase Indicating Lamps - 3 no CT's 250/5A class-1.0 15VA - 3 no BUS BAR 300A TPN, ALUMINIUM BUS BAR OUTGOING 160A FP 25KA MCCB With Thermal Magnetic base O/L, S/C protection Release- 5 no Extended Rotatory Handle, Spreaders - 5 no Aux. Contact + TAC - 5 no 6A SP 10KA MCB - 5 no ON/OFF/TRIP Indication Lamps -10 no

OD7170/2023-2024:S,I,T,C of MV cubical type Panel suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC supply system fabricated in compartmentalised design from CRCA sheet steel of 2mm thick ( 1575 X1900 X 400 mm approx.) for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing floor mounted complete with 7 tank process for powder coating in approved shade, having 300 Amps capacity extensible type FP Aluminium Alloy bus bars of high conductivity DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 75mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switch gears. INCOMER 250A FP 36KA MCCB With Thermal Magnetic base O/L, S/C protection Release-1 no Extended Rotatory Handle, Spreaders- 1 no 6A SP 10KA MCB - 4 no Digital Multifunction Meter with Rs485 Port EM6436- 1 no R,Y,B Phase Indicating Lamps- 3 no CT's 250/5A class-1.0 15VA- 3 no BUS BAR 300A TPN, ALUMINIUM BUS BAR OUTGOING 125A FP 25KA MCCB With Thermal Magne tic base O/L, S/C protection Release -6 no Extended Rotatory Handle, Spreaders -6 no Aux. Contact + TAC- 6 no 6A SP 10KA MCB - 6 no ON/OFF/TRIP Indication Lamps- 18 no 160A FP 25KA MCCB With Thermal Magnetic base O/L, S/C protection Release- 2 no Extended Rotatory Handle, Spreaders- 2 no Aux. Contact + TAC- 2 no 6A SP 10KA MCB - 2 no ON/OFF/TRIP Indication Lamps- 6 no

OD7171/2023-2024:S,I,T,C of MV cubical type Panel suitable for 415 Volt, 3 Phase, 4 wire, 50Hz AC supply system fabricated in compartmentalised design from CRCA sheet steel of 2mm thick ( 2175 X2400 X 400 mm approx.) for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing floor mounted complete with 7 tank process for powder coating in approved shade, having 800 Amps capacity extensible type FP Aluminium Alloy bus bars of high conductivity DMC/SMC bus bar supports, with short circuit with stand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 75mm x 50mm x 5mm thick, fabrication shall be done in transportable section, entire panel shall have a common copper earth bar of suitable size at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sqmm PVC insulated copper conductor single core cable, cable alleys, cable gland plates in two half, i/c providing and fixing following switch gears. INCOMER 630A 4P 36KA MCCB Thermal Magnetic Base O/L, S/C Protection Release - 1 no Extended Rotatory Handle, Spreaders- 1 no 6A SP 10KA MCB - 4 no Digital Multifunction Meter with Rs485 Port EM6436- 1 no R,Y,B Phase Indicating Lamps- 3 no CT's 630/5A class-1.0 15VA- 3 no BUS BAR 800A TPN, ALUMINIUM BUS BAR OUTGOING 125A FP 25KA MCCB With Thermal Magnetic base O/L, S/C protection Release- 12 no Extended Rotatory Handle, Spreaders - 12 no Aux. Contact + TAC- 12 no 6A SP 10KA MCB -12 no ON/OFF/TRIP Indication Lamps - 36 no 160A FP 25KA MCCB With Thermal Magnetic base O/L, S/C protection Release - 2 no Extended Rotatory Handle, Spreaders- 2 no Aux. Contact + TAC- 2 no 6A SP 10KA MCB -2 no ON/OFF/TRIP Indication Lamps- 6 no

Kamal Electricals

Bidder Name

DEV ENGINEERS

Kamal Electricals