SPECIAL REPAIR TO ROOF OF NP 3 BLDG AT CAMP AREA AT AHMEDABAD CANTT

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 by using old sized bricks complete all as all as specified and directed.

M & L brick work with sub class "B"brick (old size) straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M & L for rendering 15mm thick on fair faces of brick/ concrete surfaces in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instruction finishing the surface fair and even without using extra cement complete all as specified and directed. (WPC measured and paid seperately).

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of exterior emulsion paint with anti algal properties (Apex ultima or equivalent) with white exterior wall care putty on over one coat of primer on walls complete all as specified and directed.

M & L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant priming paint with 02 mm wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over with 2mm wall care putty with priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface of walls and for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces for any height of building with necessary scaffolding with saftey measures complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi-corrugated etc.) sheets in roof covering complete all as specified.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws complete all as specified.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling timber scantlings 40sq. cm and over in section, in any position as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.

M & L Rolled steel sections as in main and cross beams,iron flats, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etc Fe-290 (Gde E-165) as required complete all as specified.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified.

M&L for preparation of old painted wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or grith and applying two coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane complete all as all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete all as specified and directed

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.

M&L 20MM thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

All as per item no above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 all as per complete

M&L for Glazed ceramic tiles coloured (450x350mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed

S&F forex panel board, prelaminated both side with decorative choice lamination fixed in wall complete all as specified and directed.

M & L for complete removal of existing treatment of old steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S & F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

(a) One light point controlled by one switch.

(b) One ceiling/ex/Wall fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

(e) One bell point controlled by one bell push.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 2/3 pin combined 2 module all as specified and directed

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as specified and directed

S&F bell multi music type, AC, 240 volts complete. Make-Anchor or SSK or Havells Reo as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

(a) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

S & F LED fixtures,Decorative mirror light, 14 watt including connection aving a nominal system lumen output of 1200 lumens at a minimum system efficacy of 100+ lumens per watt and it should have a color temperature of 3000K(warm white), CRI>80, THD < 10% ,PF > 0.95 and surge protection upto 4 kV complete.

S&F In repair energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm, warm white ,3000K ,color PVC insulated & sheathed three core flexible multistranded copper conductor cable, complete all as specified and directed.

S&F in replacement existing UNSV LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 3000K(Warm white), CRI>80, THD < 10% and PF > 0.95 complete.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent complete.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.

S&F fully transparent meter box suitable for three phase prepaid energy meter made of polycarbonate/ high grade engineering plastic to permit clear view of display and can be sealed in such way that the entire meter is accessible only after breaking the seal.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Supply & fix exhaust fans AC single Phase 230/240 V of size 450 mm sweep with louver, metal body.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

r s corporation

Shree Builders

ALBA AC AND REF SERVICES

GIRNAR CONSTRUCTION

Marudhar construction company

DMA PROJECTS

RISING ELECTRICALS