Electrical works

Amount

Schdule A : Extension of HT line by 3 core 6.35/11 KV ,95 sq mm XLPE insulated Power Cable and installation of 1X100 KVA,11/0.433 KV Sub-station to provide power supply to Apartment of Smt.Namita Saha at Dhaleshwar road No.07, under ESD-I,Agartala

Supply of 3- Phase, 3-core, 6.35/11 KV, 95 sqmm, FRLS type, XLPE insulated, Armoured , Aluminium Conductor Power Cable as per IS 7098/II/1985 with upto date amendments.

Supply of HDPE Pipe, PE - 100 Grade, PN 8 (SDR 17) , 110 mm Outer Dia, Wall thickness : minimum- 6.5 mm, maximum: 7.3 mm

Supply of GI strip 50X6 mm for DTR earthing

Supply of Centrifugal Cast Iron Earthing Electrode, 50 mm Diameter, 3.5 mm Thickness with clamp (32X6 mm) and furne with long GI nuts and bolts in middle, perforated holes,tapper and cuts.

Supply of Earth enhancing compound/ Back fill Compound(25 Kg)

Supply of M.S. Nuts & Bolts in/c Washer of assorted size ISI marked machine made

Laying of 11 KV XLPE insulated cable by Manually digging / Machine drilling horizontally or diagonali direction for road crossing / Water supply line / Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia Gl /HDPE pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering ln Charge.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-1200mm Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks Upto 120 sq. mm

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 C X 95 Sqmm, XLPE aluminium conductor cable of 11 KV grade as required.

Supplying and Making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 C X 95 Sqmm, XLPE aluminium conductor cable of 11 KV grade as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Coiling of excess Single/3core/3.5 Core, upto to 400sqmm, HV/MV, XLPE insulated, armoured power Cable direct into earth including excavation of earth upto a depth of 1500mm (Size pit should be 2250mmX2250mm or as per site requirement.) including 1st class brick protection of two layer flat brick soling , 300 mm. Fine sand (Local quary) for cushioning/bed and refilling and ramming the excavated soil as per direction of Engineer in charge.

Supply, transportation , loading, unloading , delivery at worksite, installation and commissioning of outdoor type, floor mounted , 11 KV, 3 phase,630 A, LBS Panel with earth switch , indicator lamps, Trip push button, Spring assisted mechanism, manual operated with HRC fuse.

Erection of 9 mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Grouting of Steel Tubular pole with CC work of ratio1:2:4 ( one cement: two sand: four Jhamma Bricks) aggregate of 20 mm nominal size includung supply of cement, sand and brick aggregate complete with excavation,reffiting of earth ramming along with centering and shuttering as [email protected] cum/pole as per direction of Engg-in-Charge.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Laying & Stringing of ACSR 6/1/3.35 mm dia 'RABBIT' including hoisting & binding etc. Complete as required.

Earthing with Cast Iron Electrode 50 mm dia, 3.5 mm thickness including excavation, refilling with earth enhancing compound

lnstallation and Positioning of 11/ 0.43 KV, 3-phase , 100 KVA Distribution Transformer with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Fitting fixing of coutouts (set of 3 nos.) on wooden plank incl. cable connections and supply of wooden plank , clamp ,nut & bolts etc. as required

Carriage of 11/0.430 KV, 3-Phase 100KVA by Mechanical Transport from the Site /Store/Worshop to ESD stack yard including loading, unloading and placing , as required,

Carriage of 11/0.430 KV , 3-Phase 100KVA by Mechanical Transport from ESD Stack yard to working site including loading, unloading and placing on base, as required,

Carriage of line materials such as G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Division / Site /Store to working site , including loading, unloading and stacking as required

Schdule B : Extension of HT line by 3 core 6.35/11 KV ,50 sqmm XLPE insulated Power Cable and installation of 1X63 KVA,11/0.433 KV Sub-station for providing power supply to Kuntal Debbarama near Capital Gas agency under ESD -I, Banamalipur Agartala.

Supply of 3- Phase, 3-core, 6.35/11 KV, 50 sqmm, FRLS type, XLPE insulated, Armoured , Aluminium Conductor Power Cable as per IS 7098/II/1985 with upto date amendments.

Supply of HDPE Pipe, PE - 100 Grade, PN 8 (SDR 17) , 110 mm Outer Dia, Wall thickness : minimum- 6.5 mm, maximum: 7.3 mm

Supply of GI strip 50X6 mm for DTR earthing

Supply of Centrifugal Cast Iron Earthing Electrode, 50 mm Diameter, 3.5 mm Thickness with clamp (32X6 mm) and furne with long GI nuts and bolts in middle, perforated holes,tapper and cuts.

Supply of Earth enhancing compound/ Back fill Compound(25 Kg)

Supply of GI bracket Clamp 50X6 mm

Supply of fabricated MS Angle (65X65X6)mm

Supply of M.S. Nuts & Bolts in/c Washer of assorted size ISI marked machine made

Laying of 11 KV XLPE insulated cable by Manually digging / Machine drilling horizontally or diagonali direction for road crossing / Water supply line / Telcomunication line/Gas Pipe line etc. including Laying of 64 to 200mm dia Gl /HDPE pipe direct into the earth at a depth of minimum 1100mm below the ground surface with out effecting the existing road including excavation earth for entry pit as per site condition and direction of Engineering ln Charge.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-1200mm Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks Upto 120 sq. mm

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 C X 50 Sqmm, XLPE aluminium conductor cable of 11 KV grade as required.

Supplying and Making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 C X 50 Sqmm, XLPE aluminium conductor cable of 11 KV grade as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Coiling of excess Single/3core/3.5 Core, upto 400 sqmm, HV/MV, XLPE insulated, armoured power Cable direct into earth including excavation of earth upto a depth of 1500mm (Size pit should be 2250mmX2250mm or as per site requirement.) including 1st class brick protection of two layer flat brick soling , 300 mm. Fine sand (Local quary) for cushioning/bed and refilling and ramming the excavated soil as per direction of Engineer in charge.

Erection of M.S.Angle Cross-Arm, 1.0 to 2.5 Mtr. Long 65 x65 x 6 mm

Erection of 11 KV Pin insulator along with Pin.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Earthing with Cast Iron Electrode 50 mm dia, 3.5 mm thickness including excavation, refilling with earth enhancing compound

lnstallation and Positioning of 11/ 0.43 KV, 3-phase , 63 KVA Distribution Transformer with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Fitting fixing of coutouts (set of 3 nos.) on wooden plank incl. cable connections and supply of wooden plank , clamp ,nut & bolts etc. as required

Carriage of 11/0.430 KV, 3-Phase 63 KVA by Mechanical Transport from the Site /Store/Worshop to ESD stack yard including loading, unloading and placing , as required,

Carriage of 11/0.430 KV , 3-Phase 63 KVA by Mechanical Transport from ESD Stack yard to working site including loading, unloading and placing on base, as required,

Carriage of line materials such as G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Division / Site /Store to working site , including loading, unloading and stacking as required

Schdule C: Construction of 11/0.43 KV,3 phase,100 KVA Pole mounted Distribution S/S for extension of load to the O/O The CMO(west), Palace Compound, Agartala under the jurisdiction of ESD-II, Banamalipur

Supply of 3- Phase, 3-core, 6.35/11 KV, 50 sqmm, FRLS type, XLPE insulated, Armoured , Aluminium Conductor Power Cable as per IS 7098/II/1985 with upto date amendments.

Supply of HDPE Pipe, PE - 100 Grade, PN 8 (SDR 17) , 63 mm Outer Dia, Wall thickness : minimum- 3.7 mm, maximum: 4.2 mm

Supply of fabricated MS Channel (75X40X40X6)mm

Supply of fabricated MS Channel (100X50X50X6) mm

Supply of 2.5 mtr. long 40 mm dia, GI pipe Make: TATA/ JINDAL

Supply of 60 Kg Salt & 55 Kg Charcoal ( for 1 pit)

Supply of fabricated clamps assorted size of MS flat ( 50x6 mm) with double coat of red oxide primer coating

Supply of M.S. Nuts & Bolts in/c Washer of assorted size ISI marked machine made

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 3 C X 50 Sqmm, XLPE aluminium conductor cable of 11 KV grade as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup of Pipe with pole by the help MS Flat Clamp as required.

Laying of one number PVC insulated and sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required Upto 120 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-350mm, Hieght-750mm ,Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer Bricks . Above 35 sq. mm upto 95sqmm

Erection of M.S. Channel Cross-Arm, 1.3 to 2.8 Mtr. Long 75 x40 x40x 6 mm

Erection of M.S.Angle Cross-Arm, 0.6 to 2.8 Mtr. Long 100x 50x50 mm

Erection of 9mtrs length of Steel Tubular POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Grouting of Steel Tubular pole with CC work of ratio1:2:4 ( one cement: two sand: four Jhamma Bricks) aggregate of 20 mm nominal size includung supply of cement, sand and brick aggregate complete with excavation,reffiting of earth ramming along with centering and shuttering as [email protected] cum/pole as per direction of Engg-in-Charge.

Erection of 11 KV DOF unit set of three nos. including necessary connection complete as per technical specification.

Erection of 11 KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification.

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Earthing with G. I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.l.Pipe, Salt & Charcoal, Gi wire, nuts &bolts, etc. as required)

Laying of 8 SWG GI wire at 300mm below the ground level for earthing of Sub-Station equipments from the earth electrode

lnstallation and Positioning of 11/ 0.43 KV,3-phase , 100 KVA Distribution Transformer with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Fitting fixing of coutouts (set of 3 nos.) on wooden plank incl. cable connections and supply of wooden plank , clamp ,nut & bolts etc. as required

Positioning of cable drum, removing of cable from drum and Laying, hoisting & drawing of AB Cable 3X35-50+1x16-25+1x35-50sqmm of 1.1 KV grade as per direction of Engineering ln-Charge.

Carriage of 11/0.430 KV, 3-Phase , 100 KVA by Mechanical Transport from the ESD Site /Store/Worshop to working site including loading, unloading and placing , as required.

Carriage of. of 9.0 mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site required.

Carriage of line materials such cable, AAC,ACSR,GI, insulators ,etc., by Mechanical Transport from the Electrical Sub-Division / Site /Store to working site , including loading, unloading and stacking as required

M/S SAJAL DAS (BID ID -169312)