REPAIR TO WATER PROOFING SUNKEN FLOOR, REPLACEMENT OF INTERNAL WATER SUPPLY PIPE LINE AND SANITARY FITTINGS IN MD AND OTM ACCN AT PRC, MES, TEMPLE LANE AND MINOR UNITS AT RAMGARH CANTT

Amount

Dismantling old broken floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L coloured ceramic glazed tiles 350 mm X 250 mm X 7mm / 450mm X 350 mm x 7 mm thick, as in vertical surface such as dado/skirting etc over & including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L for joint free non skid coloured tiles 7mm to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc., over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for 9-10 mm thick light shade/coloured virtrified ceramic tiles polished area of each tile not exceeding 0.36 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mmm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles polished area of each tiles not exceeding 0.36 sqm laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:4,set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Uprooting of tree, trunk / plants ( girth not exceeding 30cm) from walls, roofs and slabs of any position and any location or any height in the building including cutting of bricks or concrete work etc, in position not exceeding 1 sqm in area & up to full depth of roots and making good the disturbed surface with PCC 1:2:4 type B-0( using 12.5 mm graded crushed stone aggregate) complete all as specified and directed.

M&L for demolition of cement concrete (un reinforced ) in ground floor, terrazo tiles floor & paving of exceeding 15cm thickness (above or below ground level ) by mechanical tools and removing excavated material outside of MoD land, complete all as directed by Engr-in-Charge.

M & L for PCC (1:5:10), type E-2 (using 40 mm graded brick aggregate) as in sunken portion, sub-base, etc., complete all as specified and as directed.

S &F in repair 50mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, etc complete all as specified and as directed.

M& L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.20 kg per sqm in sunken portion including cleaning of surfaces complete.after treatment the same shall be tested for leakage/seepage/dampness by ponding with water for 72 complete all as specified and as directed. hours

Taking down existing complete roof /parapet treatment any thickness including mud phuska, plastering, leaping plaster of any thickness cuting & up rooting tree roots/Vegitable growth & removing the debris from the premises upto 500m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M & L for brushing neat cement slurry (@ 3 Kg of cement per Sqm) for bonding of old concrete surface to new concrete, complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 ,type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement as in padding, benching, sunken portion etc., on roof surface for correcting/making proper slope on roof, etc.,complete all as specified and directed .(Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

M & L for application of water proofing treatment using APP modified roof membrane over non accessible/ non approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly with wire brush & applying 10 mm thick plaster /rendering in cement mortar (1:3)mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement (b) Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying two coat of bituminious based Aluminium Paint @ 0.3 Kg /sqm over APP Membrane.

Supply only liquid water proofing compound ISI marked. complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each, complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Forming jambs, etc, in CM 1:6 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed

S & F 100mm size butt hinges medium weight cold rolled stainless steel (SS) complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 150 mm long aluminium alloy handles of extruted section type, anodised complete all as specified & directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth in brick wall complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .

Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .

Cutting holes with superficial area not exceeding 150 sq.cm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate)as required etc complete all as specified and directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

S & F in repair stop valve of 15mm bore, chromium plated and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S & F in repair, 15mm bore bib taps ( weight not less than 400 gm) cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium plated long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

M&L vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device including plastic seat cover & taking down existing pan & making good disturbed surface complete all as specified & directed.

S & Fin repair health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F in repair vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F in repair Vitreous China urinals bowl flat back of size 465x355x265mm, complete including providing and fixing plugs,waste coupling, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm baw/size 410 mm x 330 mm x 160 m and including 38/40mm dia waiste pipe complete all as specified and directed

S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing 60cm long complete set complete all as specified and directed.

S&F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S & F in repair for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specified and directed.

S&F in repair for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F in repair for PVC (SWR) bends 110 mm bore of any radius complete all as specified & directed.

S&F in repair PVC (SWR) bends 75 mm bore of any radius complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 110mm bore provided with access door complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 75mm bore provided with access door complete all as specified & directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified & directed..

M&L for 75mm outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole including taking down existing trap complete all as specified and directed.

S & F in repair 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down of existing tank complete all as specified and directed.

Disconnecting existing tanks exceeding 250 ltr but not exceeding 500 Ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting ,if required reconnecting and re-fixing in position. complete all as specified. Note : Ccleaning ,repairing, etc measured & paid separately under respective items of BOQ .

Disconnecting existing tanks exceeding 500 ltr but not exceeding 1000 Ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting ,if required reconnecting and re-fixing in position. complete all as specified. Note : Ccleaning ,repairing, etc measured & paid separately under respective items of BOQ .

Cleaning and removing all scale and dirt ,etc from tanks exceeding 250 ltr but not exceeding 500 Ltr capacity and from mouths of circulating pipes etc complete all as specified and directed.

Cleaning and removing all scale and dirt ,etc from tanks exceeding 500 ltr but not exceeding 1000 Ltr capacity and from mouths of circulating pipes etc complete all as specified and directed.

S & F in repair for 25 mm dia ball valve, high pressure of PTMTwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight -455 gms) complete all as specified and directed.

S & F in repair for 20 mm dia ball valve, high pressure of PTMTwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight -210 gms) complete all as specified and directed.

M&L for 18 mm to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick rendering in cement mortar(1:4) etc including dismantling of exsting slab complete all as specifed and as directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work with sub class bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.(Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

M & L for rendering 10 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed..

M&L for applying three coats of white wash on newly plastered surfaces on wall including preparation of surfaces complete all as specified and directed.

M&L for preparing the newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M/S Bhushan Kumar Jain (BID ID -3077650)

ranjit singh (BID ID -3088507)

M/s Ramgarh Raj Construction Pvt Ltd (BID ID -3080935)

simplex infra project (BID ID -3082335)

M/s Ray construction (BID ID -3077954)

Modernage Constructions Pvt. Ltd. (BID ID -3085557)

M/S KAMLESHWAR SINGH (BID ID -3084404)