Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC VIKASH NAGAR GAUSHALA RAMGARH CANTT 829122 RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 829122 | L1 | Accepted-AOC AOC ACCEPTED | |
| 2 | L2₹17.3 L+₹78,240 (4.75%)Rejected-AOC | L2 | Rejected-AOC AOC NOT ACCEPTED | |
| 3 | Rejected-Technical | - | Rejected-Technical MES enlistment criteria not fulfilled by the firm. |
Tender Value
₹20.0 L
EMD Value
₹39,800
Closing Date
21 Feb 2022, 6:00 pmClosed
GE RAMGARH CANTT
GE RAMGARH CANTT JHARKHAND PIN 829122
REPAIRING OF DEEP FREEZER REFRIGERATOR AC AND WATER COOLERS GEYSERS AT MH PRC SRC ASC DAD AND MDC AT RAMGARH CANTT UNDER GE RAMGARH
2022_MES_502387_1
8300/3091/E8
Open Tender
Civil Works
Item Rate
330 days
GE RAMGARH
Class E Cat b(i)
7 documents required · 7 mandatory
₹500
Yes
GE RAMGARH CANTT
₹39,800
Yes
26 Mar 2022
20 Jan 2022
23 Feb 2022
20 Jan 2022
21 Feb 2022
7 Feb 2022
Amount
Taking down defective split type Acs/Window type AC Units, shifting to work shop, taking out the defective compressor of capacity 1.5 Ton capacity from unit, replacing the compressor with new compressor, cleaning refrigeration system with Carbon Tetra Chloride (CTC) thoroughly, leak testing with refrigerant gas, testing at workshops, shifting to location, reinstalling in its original position, connecting up all electrical connections, testing and commissioning complete all as specified and as directed by Engr-in-charge. Note: Rate quoted is deemed to be inclusive of cutting, brazing, sealing the refrigeration tubing, replacement of strainer, cost of CTC, refrigerant gas and CO2 etc., required for the job including transportation. Make: Carrier/LG/Samsung/Sriram/Voltas/Kirloskar/Techamsa/ Bluestar.
Taking down defective split type ACs/Window type AC Units, shifting to work shop, taking out the defective compressor of capacity 2 Ton capacity from unit, replacing the compressor with new compressor, cleaning refrigeration system with Carbon Tetra Chloride (CTC) thoroughly, leak testing with refrigerant gas, testing at workshops, shifting to location, reinstalling in its original position, connecting up all electrical connections, testing and commissioning complete all as specified and as directed by Engr-in-charge. Note: Rate quoted is deemed to be inclusive of cutting, brazing, sealing the refrigeration tubing, replacement of strainer, cost of CTC, refrigerant gas and CO2 etc., required for the job including transportation. Make: Carrier/LG/Samsung/Sriram/Voltas/Kirloskar/Techamsa/ Bluestar.
M & L for replacement of rusted body portions of split type AC unit of 1.5/2.0 Ton capacity with same gauge/size materials like MS sheet, iron similar to the existing one by removing existing, foam pad and components and scraping out old paint on complete body, cleaning surface throughly, applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer, fixing of new foam pad not less than 3mm thick, refixing of all components, testing and installation in original position, connecting up all electrical connections, testing and commissioning all as specified and as directed.
M & L for condenser fan blade set for 1.5/2.0 Ton capacity of any type of Acs, suitable for makes of Carrier/Voltas/Amtrex/BlueStar rotation in the casing testing including taking out the defective condenser fan blade all as specified and as directed. Make: Kirloskar/Crompton/Jyoti/ABB/BCH or equivalent as approved.
Scrapping the existing painted surface of split type A/C and window type AC, cleaning the surface thoroughly and apply two coats of approved synthetic enamel paint over a coat of red oxide primer for any capacity of Acs, complete all as specified and as directed.
M & L for Single Pole contactor for 1.5/2.0 Ton capacity of split type Acs, complete all as specified and as directed.
Renewal of thermal insulation for 1.5/2.0 Ton split type Acs, complete all as specified and as directed.
Taking out the burnt out fan motor of evaporator unit and rewinding the motor with appropriate gauge copper wire including varnishing and replacement of worn out shaft, bushes, bearings, reassembling, testing and fixing to the split type AC unit of capacity 1.5/2.0 Ton complete all as directed by Engr-in-Charge.
All as per item No. 8 here-in-before but outdoor unit of capacity 1.5/2.0 Ton split type AC, complete all as directed.
M & L for Thermal overload relay for 1.5/2.0 Ton capacity of any type of Acs including taking down unserviceable thermal over load relay, complete all as specified and directed.
S & F for running capacitor of 25/36 MFD suitable for 1.5/2.0 Ton capacity split type AC/Window type AC including taking down unserviceable capacitors, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/Universal/Zeco/ Bluestar/Carrier or equivalent as approved by GE.
S & F starting capacitor 80/100/120 mfdsuitable for 1.5/2.0 Ton Capacity Split type AC/window type AC including taking down of old unserviceable starting capacitor, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/Universal/Zeco/Bluestar /Carrier or equivalent as approved by GE
M & L for Fine Filter for 1.5/2.0 Ton split type AC including taking down unserviceable fine filter, complete all as specifed and as directed.
M & L for drain connection and drain trap for 1.5/2.0 Ton capacity of split type aCs in repairs, complete all as specified and as directed.
Taking down the unserviceable wiring kit, suplly and fix new wiring kit suitable for 1.5/2.0 Ton capacity of split type AC/window type Acs, complete all as specified and as directed.
M & L for evaporator fan blower motor of suitable capacity duly ISI marked, double inlet, double width centrifugal type suitable for 1.5/2.0 Ton capacity split type AC including taking down the unservicable damaged blower complete all as specified and as directed.
M & L for capillary tybe set suitable for 1.5/2.0 Ton capacity of split type AC including taking down the unserviceable defective capillary tube set, complete all as specified and as directed.
M & L for MS stand suitable for mounting outdoor unit split type AC complete including taking down existing rusted mild steel stand, complete all as specified and as directed.
M & L for servicing carefully any type of AC of capacity 1.5/2.0 TR from site and removing power connection and front PVC grills, air filters, cleaning, washing, removing dirt, cleaning, servicing including chemical wash of cooling coil of indoor cooling unit and condenser coil of outdoor unit and cleaning refrigeration system with CTC (Carbon Tetra Chloride) throughly, leak testing with refregerant gas and re-assembling the dismantled components and fixing its original position all as specified and as directed.
M & L for shifting of Split AC 1.5/2.0 TR capacity including removing indoor cooling machine, copper piping, drain pipe and thermal sleeve, lifting angle with necessary refixing arrangement on wall surface, copper piping of suitable gauge for suction and delivery with insulation, including re-surfacing to disturbed and testing and commissiniong all as specified. Note: The copper pipe additional required will be measured against relevant items in this schedule.
S & F in repair industrial metal plug and socket enclosure with socket out let with plug top 20 Amp, 240 Volts with MCB SP 20-32 'C' series Amp controlled all as specified and as directed. Make: LEGRAND/L&T/HAVELLS.
M & L for cleaning/flushing out the refrigeration system thoroughly with CTC, leak testing with CO2/N2 locating and rectifying out the leaks by brazing with silver/copper rod, pressure testing, vacuuminising and charging with refrigerant gas and topping up compressor oil, testing and commissioning of split type ACs of 1.5/2.0 Ton capacity. Note: Refrigerant gas will be measured and paid separately.
Removal of the unservicable temperature sensor probes and supply and fix new temperature sensor probes in the main circuit of split type AC , complete all as specified and as directed.
S & F Printed Circuit Board for split AC suitable for 1.5 TR to 2.00 TR, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/ Videocon /LG/National aircon/Bluestar/Carrier as approved by GE
S & F Printed Circuit Board for window type AC suitable for 1.5 TR to 2.00 TR, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/ Videocon /LG/National aircon/Bluestar/Carrier as approved by GE
S & F remote controller unit suitable for split type Acs/window type AC unit of 1.5/2.0 Ton capacity including taking out old and unserviceable remote controller complete all as specified and as direced. Make : Voltas/ Videocon /LG/National aircon/Bluestar/Carrier as approved by GE
M & L for PVC drain pipe of 20 mm dia with suitable clamps on walls and ceiling, complete all as specified and as directed.
M & L for gas charging with refrigerator gas (R-22R /R-134/R-32A/R410A) in new sealed unit of compressors Acs/Water Cooler/Deep Freezer unit of any type and size including testing, complete all as specified and as directed by Engineer-in-charge.
S & F cooling coil of 1.5/1/2 ton AC including necessary welding/brazing of copper pipes line, testing of leakage, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/LG/Godrej/Carrier or equivalent as approved by GE
S & F cooling motor for walk in cooler, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/Videocon/Bluestar/Carrier as approved by GE
S & F new air filter for AC of any size, complete all as specified and as directed by Engineer-in-charge. Make : Kirloskar/Tenacity/Athelete or equivalent as approved by GE
M & L for PVC cable 3 core 4 Sqmm unsheathed multi stranded copper conductor, complete all as specified and as directed by Engineer-in-charge. Make : Havells/Polycab/Finolex/Plaza/Anchor.
S & F new strainer filter for AC, complete all as specified and as directed by Engineer-in-charge. Make Voltas/LG/Godrej/Bluestar/Kirloskar/Carrier or equivalent as approved by GE.
S & F copper pipe as per existing size including necessary welding/brazing/making threading required length, complete all as specified and as directed by Engineer-in-charge.
S & F air grill for split AC as existing size & make, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/Videocon/LG/National aircon/Bluestar/Carrier as approved by GE
Taking down unserviceable water cooler from site and transporting the same for repair, removing the unserviceable burnt sealed unit (compressor) from the water cooler and S&F factory overhauled compressued duly charged with compressor oil including welding in position and testing on required pressure and transporting the water cooler at site in its original location of capacity 40/80 Ltr. Make:Usha/Arco/Sidhwal. Note:Gas Charging shall be measured and paid for separately under relevant items.
Supply and replacement of running capacitor for water cooler 40/80 Ltr capacity.
Supply and replace starting relay for water cooler 40/80 Ltrs.
Taking down old defective overload protector and Supply and fixing new suitable for 40/80 Ltr water cooler. Make: Renutral/Techno Mech.
S & F starting capacitor for 40/80 Ltrs water cooler. Make: Asian/Unistar/Arvind.
Taking out old unserviceable internal wiring and rewiring the same gauge and size with flexible copper conductor single core with terminal clips etc including screws, washers etc., required for fastening with body complete.
Taking out rusted black body MS cover and supply and fixing new 2mm thick MS plate cover of duly painted to match the existing of water cooler.
All as per item No. 42 here-in-before but front panel.
Replacement of unserviceable water connection pipe with new 15mm dia PVC pipe including MS clamp.
Replacement of unserviceable float valve with new PVC ball suitable for 15mm dia GI pipe. Make: Prayag.
Taking out old unserviceable water tap 15mm dia and supply and fixing new self closing chromium plated push cock 15mm heavy duty, complete all as specified and as directed.
Taking out old unsesrviceable fan motor and supply and fixing new fan motor suitable for water cooler 40/80 Ltr. Make: Cool/EME/Crompton.
M & L for cleaning water cooler complete internally and externaly including scraping and removing all scales and dirt etc., applying two coats of synthetic enamel tone paint over a coat of red oxide primer and writing of SM/MES No. in 3 cm, complete all as specified and as directed.
Taking down unserviceable refrigerator of capacity 250 Ltr to 310 Ltr from site and transporting the same to workshop for repair/removing unserviceable burnt sealed unit (compressor) and supply and fix factory overhauled compressor duly changed with compressor oil including welding in position and testing on required pressure and transporting back to its site and fix in original location complete all as specified and as directed by Engr-in-Charge. Note Gas charging shall be measured and paid for separately against relevant item.
All as per item No. 49 here-in-before but of 165 Ltr to 190 Ltr capacity. Make: Kelvinator/Alwyn.
Replacement of freezer door (Plastic) complete with tension spring as per original.
Replacement of unserviceable tray with new one as per original.
Replacement of fruit vegetable tray as per original.
Replacement of PGMY lamp (bulp) as per existing.
Replacement of door liver (Plastic) as per the original.
Replacement of door magnetic gasket as per original make for any capacity of refrigerator.
Replacement of unservicable relay box type of any type and capacity of regrigerator.
Replacement of unserviceable over load protection with new one for any type and any capacity of refrigeration. Make: Renutral/Shriram.
Labour for opening of refrigerator of any capacity and refixing the same after flushing out and removal blockage, brazing replacement of liquid line filter and rechanging the refrigeration gas R-22 to obtain the desired cooling complete all as specified and as directed.
M & L for spray painting of refrigeration with synthetic enamel paint over a coat of red oxide primer after preparation of surface or surface of refrigeration capacity 310/286/165 Ltr of any make/model.
Taking out deep freezer 300 litre capacity for repair/servicing including transporting from workshop and to site, complete all as specified and as directed by Engineer-in-charge. Note : Spare parts shall be measured and paid for separately, spare parts shall be of similar make of deep freezer or as appoved by GE.
S & F new sealed unit compressor for deep freezer as per existing size & capacity as approved by GE. Make : Voltas/LG/Godrej/Buestar/Kirloskar/Carrier or equivalent as approved by GE.
S & F running capacitor 10 MFD including taken out capacitor, complete all as specified and as directed by Engineer-in-charge. Make : Voltas/Universal/Zeco/Bluestar/ Carrier of equivalent as approved by GE
S & F fan motor for deep freezer, complete all as specified and as directed by Engineer-in-charge. Make : Kirloskar/Crompton/Jyoti/ABB/KSB /NGF/ BCH or equivalent as approved by GE.
S & F relay 40/60 amp of deep freezer as per sample, complete all as specified and as directed by Engineer-in-charge.Make : Voltas/LG/Godrej/Buestar / Kirloskar /Carrier or equivalent as approved by GE.
M & L for Body patching including denting at certain place of deep freezer and then spray painting complete over one coat of primer, complete all as specified and as directed by Engineer-in-charge.
Repair to voltage stabilizer of any make phase with input voltage 135-190 V and output voltage 200-240 Volts, capacity upto 5 KVA by dismantling and taking out burnt main transformer and rewinding with suitable gauge super eanmelled copper wire, varnishing, etc., complete including replacement of unserviceable/defective volt meter, (0-300 Volts), complete all as specified and as directed. Make: AE/PRIMER or its equivalent as approved.
S & F in replacement of voltage stabilizer, copper wound of 5 KVA capacity digital display type having I/P Correction Range of 140-280 Volt, compelte all as directed. Make: SINETRAC/TOTALINE/V-GUARD.
S & F heating element including rubber gasket and washer etc., of capacity 1.5 KW suitable for existing make and shape, complete all as specified and as directed.
S & F heating element including rubber gasket and washer etc., of capacity 2 KW suitable for existing make and shape, complete all as specified and as directed.
S & F thermostat including rubber/PVC gasket to be set to a temperature not higher than the range of 70 degree centigrade suitable for existing geysers of capacity 25/35/50 Ltrs. Including taking down existing unserviceable thermostat, complete all as specified and as directed.
S & F fusible plug melting at 90-100 degrees centigrade including taking down existing unserviceable fusible plug, complete all as specified and as directed.
S & F high pressure valve with dead weight suitable for 25/40 Ltrs capacity geysers including taking down existing unserviceable high pressure valve, complete all as specified and as directed.
M & L for preparation of surface of geyser 25/50 Ltrs Capacity by scrapping and applying one coat of synthetic enamel paint of approved colour over a coat of zinc primer including tinkering and welding if required at site, complete all as specified and as directed.
S & F PVC connecting ppe 18" long with brass adopters for hot and cold water and connecting up with complete for 25/35/50 Ltrs capacity geysers including taking down existing unserviceable PVC connecting pipe, complete all as specified and as directed.
S & F bottom covers (set of two halves) duly painted made out of Aluminium /MS sheet of 18 SWG for 25/35/50 Ltrs capacity geysers including taking down unserviceable bottom covers, complete all specified and as directed.
S & F base assembly complete with inlet, outlet, themostat pipes, drain plug and screws for fixing the element suitable for any make and capacity geysers complete with nuts, bolts and rubber gasket including taking down existing unserviceable base assembly, complete all as specified and as directed.
M & L for repairs to water heater inner vessel including brazing, welding, testing for a pressure of 3 Kg/Sq cm, re-assembling of any capacity geysers, complete all as specified and as directed.
M & L for repairs to geyser cell cover of any capacity by cutting the existing rusted sheet and replacing with MS sheet by brazing or welding as required to match the existing all as specified and as directed.
S & F indicator lamp for 25/35/50 Ltrs capacity geysers including taking down old existing unserviceable indicator lamp, complete all as specified and as directed by Engineer-in-charge.
S & F PVC insulated copper cable 3 core of size 2.5 Sqmm to any capacity geysers as required length, complete all as directed.
Labour for rectification of leakages in connecting pipes and minor complaints of any capacity geyser.
Servicing of geysers of any capacity by opening of entire geysers and cleaning all the sledges, blockages, dusts, etc., complete all as specified and as directed.
om suppler
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .