Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹13.0 LAdmitted-Finance | -15.00% | ₹13.0 L | L1 | Admitted-Finance |
| 2 | L1₹13.0 LAdmitted-Finance KOTHI NO 6 CIVIL LINES OPP TB TOWER DISTRICT MORADABAD UTTAR PRADESH | MORADABAD | UTTAR PRADESH | 244001 | -15.00% | ₹13.0 L | L1 | Admitted-Finance |
| 3 | L1₹13.0 LAdmitted-Finance 4 4 VIKAS NAGAR LUCKNOW U P | LUCKNOW | LUCKNOW | UTTAR PRADESH | -15.00% | ₹13.0 L | L1 | Admitted-Finance |
| 4 | L1₹13.0 LAdmitted-Finance | -15.00% | ₹13.0 L | L1 | Admitted-Finance |
| 5 | L1₹13.0 LAdmitted-Finance | -15.00% | ₹13.0 L | L1 | Admitted-Finance |
Tender Value
₹15.3 L
EMD Value
₹1.5 L
Closing Date
14 Sept 2026, 12:00 pmClosed
EE CD PWD RAMPUR
Office of EE CD PWD RAMPUR
Road Signage Work on NH-24 to Chamraua via Bhamraua Road ch. 0.000 to 2.350 in district Rampur
2026_CEMBD_1182837_2
1147/E-Tender/26-27 Date 20.07.2026
Open Tender
Civil Works - Water Works
Percentage
180 days
Rampur
As per NIT, T-1, Prahari
2 documents required · 2 mandatory
₹854
₹1.5 L
Yes
17 Sept 2026
7 Sept 2026
14 Sept 2026
7 Sept 2026
14 Sept 2026
7 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) | 1 | Cum | - | - |
| 1.1 | Cautionary Sign- T-Junction/X-Junction Sign & zebra etc (90 cm equilaterial triangle with diffination platesize 20 cm x 60 cm) | 6 | Nos | 4,069 | ₹24,414 |
| 1.2 | Stop Sign Board (90 cm hight Octagonal) | 6 | Nos | 4,824 | ₹28,944 |
| 1.3 | Speed Limit (60 cm circular) | 4 | Nos | 3,818 | ₹15,272 |
| 1.4 | 60 x 60 cm square with diffination plate (20x 60 cm) | 4 | Nos | 4,106 | ₹16,424 |
| 1.5 | Direction and Place Identification Signs (90 cm equilaterial triangle) | 6 | Nos | 6,289 | ₹37,734 |
| 1.6 | Hazard Sign Board (30 cm x 90 cm rectangular) | 8 | Nos | 3,321 | ₹26,568 |
| 2 | Cat Eyes (raised pavement marker).
Supply & fixing of moulded cats eye without shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type 'H' and complying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufacture's recmmendation including site clearence etc. and complete as per direction by E/I. | 150 | Nos | 195 | ₹29,250 |
| 3 | Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area. Thickeness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes. | 772.5 | Sqm | 618 | ₹4,77,405 |
| 4 | Solar Power road marker (Solar Studs)
The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm it shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperrature range of -40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all.complete as per direction of the Engineer-in-Charge | 30 | Nos | 2,695 | ₹80,850 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
Tendernotice_2.pdf
PDF • 0.27 MB
2T-1.pdf
Tender Documents • 2.08 MB
BOQ_2224279.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .