Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF OFFICE OF THE EXECUTIVE ENGINEER, KNNL, GRBCC, DIVISION NO-04,CHIKODI, TALUKA CHIKODI BELAGAVI DISTRICT

Karnataka Neeravari Nigam Limited

KNNL Division GRBCC Div No 4 Chikkodi | Karnataka

Amount: ₹5.0 CrCloses: 11 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published26 Sept 2024
Closed11 Oct 2024
Retendered26 Sept 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 26 Sept 2024

Tender Value

₹5.0 Cr

EMD Value

₹7.5 L

Closing Date

11 Oct 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

S S Karagar

Office Number

Work Description

CONSTRUCTION OF OFFICE OF THE EXECUTIVE ENGINEER, KNNL, GRBCC, DIVISION NO-04,CHIKODI, TALUKA CHIKODI BELAGAVI DISTRICT.

Tender Information

Tender ID

KNNL/2024-25/BD/WORK_INDENT1645

Reference Number

KNNL/2024-25/BD/WORK_INDENT1645

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KNNL Division GRBCC Div No 4 Chikkodi

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

Requiredcopy of the valid Karnataka PWD Class I & above Registration Certificate

RequiredCopy of Valid Employees Provident Fund Registration Certificate and with latest EPF Paid challan

RequiredValid GST Registration Certificate and the specimen signature of Authorized person should be enclosed.

RequiredIncome Tax PAN card and Income Tax returns filed for the Financial year 2023-24 / Assessment year 2024-25.

RequiredThe intending bidder in the last five years from 2019-20 to 2023-24 should have Satisfactory completed at least one building work of the value not less than 50percent of the amount put to tender i.e. Rs249.86 lakhs. The work done certificate issued by the an officer not below the rank of Executive Engineer..

RequiredThe intending bidder in the last five years from 2019-20 to 2023-24 should have achieved in at least two financial years a minimum financial turnover of Rs999.44 lakhs in all classes of Civil Engineering construction works only, usually not less than the estimated annual payments under this contract. Turnover certificate issued by CA should enclose UDIN Number.

RequiredLiquid assets and/or availability of credit facilities of not less than Rs136.30 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

RequiredThe intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work as per para 4.0 below.

RequiredThe intending Bidder should have executed in any one year the following minimum quantities of work usually 80percent of the peak annual rate of construction during the last 5 years ie from 2019-20 to 2023-24.Earthwork Excavation- 1351.30 cum, Concrete including PCC&RCC- 545.22 cum, Reinforcement steel bars for RCC works- 54t, Brick Work- 343.27 cum, MS Grill- 3002.4 kg

RequiredThe tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 5.00 Lakhs in any one year 2019-20 to 2023-24.

RequiredThe Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 7.50 Lakhs in any one year 2019-20 to 2023-24

RequiredTenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under - Assessed available tender capacity -AxNx1.5-B

RequiredThe contractor should attach their recent correct portal address, Phone No. mail address

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end.

A copy of the valid Karnataka PWD Class I & above Registration Certificate.

Copy of Valid Employees Provident Fund Registration Certificate and with latest Paid challan.

Income Tax PAN card and Income Tax returns filed for the Financial year 2023-24 / Assessment year 2024-25.

To qualify for award of this contract, each tenderer in his / her name should have achieved. in the last five years (2019-20 to 2023-24) should have satisfactorily completed (at least 90% of contract value of on going works) as a prime contractor, at least one building work of value not less than Rs 249.86 lakhs (usually not less than 50% of the amount put to tender under this contract). Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the Superintending Engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited.

The annual turnover from all classes of civil engineering works should be costing not less than Rs. 999.44 lakhs in any of the two financial years during the last five years (2019-20 to 2023-24). Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished. Duly mentioning UDIN on Turnover certificate (from CA). (The annual turnover of previous year shall be updated to the year of tender invitation at 10% per annum).

Liquid asset and/or availability of credit facilities of not less than Rs 136.30 lakhs. (Unconditional credit lines/letters of credits/certificates from nationalized banks) for meeting the fund requirement etc. The contractor should upload necessary documents issued by the nationalized banks as per prescribed format enclosed as Annexure XIV

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work as per para 4.0 below.

The intending Bidder should have executed in any one year, the following minimum quantities of work (usually 80% of the peak annual rate of construction) during the last 5 years (i.e., from 2019-20 to 2023-24). The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded. Earthwork Excavation- 1351.30 cum, Concrete (including PCC&RCC)- 545.22 cum, Reinforcement steel bars for RCC works- 54.00 t, Brick Work- 343.27 cum, M. S. Grill- 3002.4 kg.

Availability by owning at least 50% of the required / specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all the works provided, the relevant documents (commitment agreements etc.) for availability for this work are furnished. The following key and critical equipment for the work. Modified as per G.O. No. FD 4 PCL 2008 dated 14/10/2008, Tippers ( 3.0 to 5.0 m3)- 1 Hire & 1 Lease, JCB- 1 Hire & 1 Lease, Transmit mixer (2.0 m3) - 3 Own & 2 Hire.

The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs. 5.00 Lakhs in any one year (2019-20 to 2023-24) .Note The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the KPP- portal.

The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs. 7.50 Lakhs in any one year (2019-20 to 2023-24). Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the KPP-portal

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under - Assessed available tender capacity -AxNx1.5-B. Where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited .B-Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next i.e. N years (period of completion of the works for which Tenders are invited).Note-The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge not below the rank of an Executive Engineer or equivalent.

Corrigendum / Addendum will be published in the KPP Portal website for all modifications / Corrections if any

All duties, taxes, GST and other levies payable by the contractor under contract are for any other cause shall be including in the rates, prices and total price submitted by the tenderer. The amount put to tender is inclusive of GST.

The intending contractors should note that, if any of the lands (either in part / parts or in whole) required for the work is not yet acquired by the Department, it shall be the responsibility of the contractor to take possession of such land and start the work by consent of the owners before commencement of work at no extra cost to the Department and no claims whatsoever relating to non availability of land would be entertained.

The bidder should only submit / upload in KPP portal platform genuine certificates / documents , etc., that are as obtained from competent / concerned authorities against each required eligible criteria. Any of the submitted / uploaded certificates / documents etc., found to be fake after verification from issuing authority, then his / her EMD will be forfeited, besides proposed for making such bidders for blacklisting.

Tender will be opened in the office of the Executive Engineer Karnataka Neeravari Nigam KNNL GRBCC Division No.4 Chikodi, Belagavi District in presence of the bidders who wish to participate

The Bidder / Firm / Company is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-procurement portal due to Internet connectivity issues and technical glitches

If any of the dates mentioned above happens to be a General Holiday, the next working day will holds good.

Conditional tenders are liable to be rejected. The officer competent to accept the tenders shall have the right to reject any or all the tenders without assigning any reason whatsoever

The intending bidders are advised to visit the site of work before submitting their tenders

As per the Government order No. LT/300/LET/2006 Bangalore Dt:-18-01-2007 a sum amounting to 1% of the bill amount of the contractor will be deducted towards cess and will be credited to the Karnataka building and other Constructions labour welfare fund.

Any bidder who is otherwise technically qualified withdraws from the bidding process at any stage before a final decision is taken on the tender, the EMD of such bidder shall be forfeited, the name of such bidder shall be removed from the category list of contractors at least for a minimum period of one year in DEPARTMENT/KPWD, besides making such bidders liable for blacklisting

The detailed tender notification can be had from the website https://kppp.karnataka.gov.in. And linking to e-tender or in the office of the undersigned.

The payment of bills for these works will be made as and when letter of credit received under the same Head of Account from Govt. of Karnataka

Typo-graphical errors if any will not be the ground for any claims by the contractor

If many bidders quoted lowest same price to the work and the award of work will be done by toss/ lottery system or by obtaining no objection certificate in this regard by other contractors who have quoted the same price

The work shall be tackled and completed within prescribed tender period

The bidder should adhere all terms and conditions as mentioned in the tender notification and bid documents

The Royalty charges will be recovered as per the govt. orders issued from time to time.

No interest will be paid by Karnataka Neeravari Nigam Limited on the Earnest Money deposited

The contractor is responsible for any damages due to natural calamity the government or Nigam will not give any compensation for until the completion of maintenance period

The currency period of the tender shall be 180 days from the date of opening the tender/tenders. If delay in deciding the tender is inevitable, the consent of the tenderer agreeing to keep open his offer for a minimum further period should be obtained in advance. The minimum further period for which the tenderer is required to keep his offer open should invariably be specified before his consent is obtained

During technical evaluation, if the employer finds that any certificates / information furnished is false, such bidders will be disqualified and barred from participation in the bid

If any bidder fails to satisfy the conditions mentioned above, such bids will be rejected and their financial bids will not be opened

The Bidder shall be responsible for successful performance of the contract

The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid

Further information can be had from the undersigned during office hours on telephone No: 08338 272485.

If the percentage quoted by the contractor for the work is below ninety percent of the updated recast estimated amount put to tender, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the updated cost put to tender. In case of contractor quoting above 125% of updated cost put to tender, then the over and above 125% of the updated cost put to tender will be withheld during the progress of work. The additional performance will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per agreement. The withheld amount in the later case will be released only after entire work contracted is fully completed and so certified by the Executive Engineer. (If BG submitted while issuing fresh BG or extending any existing BG, claim period of a minimum one year from the date of expiry of validity period of BG is to be specified invariably)

The intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities, etc and shall upload along with bid with details of references for visit of different parts of the scheme in the form of photographs of site

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5 percent of contract price & Additional Security for unbalanced tenders in accordance with clausse 25.5 of ITT and clause 44 of the conditions of contract for all works.

The tender processing charges paid by the bidder/firm/company are not refundable even if the tender is cancelled

The bidder/firm/company shall send the authorization letter for their representation duly attending their signature

The Employer shall give notice to the Contractor of any Defects before the end of the Defects Liability Period, which begins at Completion and is defined in the Contract Data. The Defects Liability Period shall be extended for as long as Defects remain to be corrected

Maintenance period or the Defect liability period for this work is 24 months from the date of completion of work.

If the Employer instructs the Contractor to carry out a test not specified in the Specification to check whether any work has a Defect and the test shows that it does, the Contractor shall pay for the test and any samples. If there is no Defect the test shall be a Compensation Event

The materials used for electrical works shall confirm to relevant ISI specification

The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid.

The Bidder shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date

In case death of a contractor after execution of the agreement/ commencement of the work , his legal heir if any eligible registered contractor & willing can execute at complete the work at the accepted tender rates irrespective of the cost of the work.

The necessary certificates / documents in support of eligibility criteria to be fulfilled as stipulated shall be scanned and attached to e- tender document. The scanned copy (preferably in PDF form) of the required pre-qualification documents should be uploaded to the tender and the self-attested copies of the document of all details uploaded to the e-portal & original documents should be produced, for verification on the date of opening of Technical Bid. If failed, the tender will be treated as non-responsive bid and will be rejected.

Scanned signature of the Bidder/ Firm/ Company authorized representative shall be attached while uploading the bid document.

Incomplete tender documents will be rejected.

All materials like steel, cement etc., required for the successful completion of the above work should be procured by the contractor only. No supply of any materials shall be made by KNNL.

The Bidder/ Firm/ Company should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition Problems if any.

Further information can be had from the Office of the Executive Engineer, KNNL GRBCC DIVISION NO-4, Chikkodi, Belagavi District during office hours.

First Aid facilities at each site shall be made available by the agency at his cost.

The intending bidders should note that, if any of the land either in part/parts or in whole required from the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of the such land and start the work by consent of the land owners before commencement of work at no extra cost to the nigama and no claim what so ever relating to non-availability of land would be entertained. Further, Nigam shall co-operate in getting the required for the work by inisiating LAQ proposal as per Land Acquisition Act. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation. In case of any obstruction from the land owner during the construction period or during the maintenance period, the contractor has to make his own arrangements to get the dispute settled and to bear the extra cost, if any, on that account.

Time allowed for completion of the work from the date of Agreement to the contractor is 11(Eleven) months including monsoon period.

All Contractors must obtain Employee Compensation Act (ECA) policy for the workers engaged under the works. And this office will not be having any liabilities under the said Act provisions.

Technical Criteria

General

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Past Experience

Work Done Certificate

Capabilities of Vendor

A copy of the valid Karnataka PWD Class I & above Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

List of existing commitments and on-going works

Work Done Certificate

Others -- Bid capacity

Others -- License for water supply/ sanitary

Others -- Valid Electrical License

The intending bidder/firm/company should furnish list of Man power, machinery available with them for taking up the work as per para 4.0 below.

Others -- Man power & machinery

Financial Status

Copy of Valid Employees Provident Fund Registration Certificate and with latest EPF Paid challan

Valid EPF Certificate

Valid GST Registration Certificate and the specimen signature of Authorized person should be enclosed.

GST Registration

Income Tax PAN card and Income Tax returns filed for the Financial year 2023-24 / Assessment year 2024-25.

ITR Filed Copy (Mentioning PAN)

Line of Credit

Audited CA Certificate of Annual Turnover

Others

The contractor should attach their recent correct portal address, Phone No. mail address

Others -- Address for correspondence

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹7.5 L

Important Dates

Last Activity

26 Sept 2024

Published

26 Sept 2024

Bid Opening

14 Oct 2024

Download Ends

8 Oct 2024

Pre-Bid Meeting

4 Oct 2024

BOQ Preview

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

•

Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipp...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with ...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

•

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge with...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for doors, with styles and rails of 40mm. thick with bottom and lock raiIs 180mm wide top rail and styles 1OOmm wide a...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOCless than 50 g/L and UV resistance as per IS 15489:2004, Alkali& fungal resistance, dirt resistance exterior paint of required shade(...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The til...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm with all leads and lifts.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Door stopper 75mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mmwith all leads and lifts.

•

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

•

Construction of Granular Sub-Base of required grading as pe r design mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for se...

•

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder) to the RCC surface like bathroom, toil...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm with all leads and lifts.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Door stopper 75mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm with all leads and lifts.

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm with all leads and lifts.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm with all leads and lifts.

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm lengthwith all leads and lifts.

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm with all leads and lifts.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm with all leads and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm with all leads and lifts.

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm lengthwith all leads and lifts.

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...

•

WATER SUPPLY & SANITARY

•

Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, imcluding fixing the pipe wi...

•

Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...

•

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

•

Providing and fixing C.P. brass stop cock (concealed) of standard designand of approved make conforming to IS:8931 with all leads and lifts.

•

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g with all leads and lifts.

•

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the wall...

•

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and reparing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gr...

•

Cutting holes upto 30x30 cm in walls including making good the same : with common burnt clay F.P.S (non modular Bricks) with all leads and lifts.

•

KSRB 13-11 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 : 1996 marked with cover and suitable locking arrangements, making necessary holes of in...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore with all leads and lifts.

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing white vitreous china squatting plate urinal withintegral rim longitudinal flush pipe. with all leads and lifts.

•

Providing and fixing 100 mm sand cast Iron grating for gully trap with all leads and lifts.

•

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors : * 100 mm inlet...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box with all leads and lifts.

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box with all leads and lifts.

•

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 1-...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps one way with all leads and lifts.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 waysocket with all leads and lifts.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator with all leads and lifts.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch with all leads and lifts.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch with all leads and lifts.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket with all leads and lifts.

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board 32-40A 2 Pole with all leads and lifts.

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply with all leads and lifts.

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder with all leads and lifts.

•

Supplying & fixing of retrofit type LED bulb .... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W life greater...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 5...

•

Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w...

•

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit in brick wall with all l...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit CC floor with all leads ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip with all leads and lifts.

•

Supplying and drawing UTP-CAT 6E LAN cable with all leads and lifts.

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 4Pair with all leads and lifts.

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth with all leads and lifts.

•

Supplying fixing of Network Switches 24 port 10/100/1000 Switch with all leads and lifts.

•

Supplying & fixing of I/O socket with back box Single I/O with all leads and lifts.

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter. with all leads and lifts.

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter with all leads and lifts.

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter with all leads and lifts.

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. with all leads and lifts.

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.with all leads and lifts.

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 5...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% ...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trialpits, depositing on bank, Supplying and Displaying necessary Danger Boards and

•

Lighting, Using sigh...

•

Refilling the cable trenches with selected available earth from trenche execavation including watering ,consolidaion in Layers of 15 cms Thickeness including depositing of tehe surplus earth with ale...

•

Laying of cable in existing Trench /GI Pipe /stone ware Pipe /RCC Hume pipe using Wooden /Aluminum rollers as Directed by the departmental LT Cable 2.5 to 25 Sqmm with all leads and lifts.

•

Supplying and fixing of class B) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. (68/7.12) with all leads...

•

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

•

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. 100 mm Size with all leads and lifts.

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments size-50mm with all leads and lifts.

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments, size 50mm with all leads and lifts.

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 s...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools an...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit with all leads a...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit with all leads and ...

•

Earthing: Supplying and fixing and wiring earth electrode for groundingcircuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sal...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Appendix I Additionalities for Formwork, Centering & Scaffolding : Following additional percentage to be added to the finished rates of concrete of Buildings, Irrigation works, Water supply works, Ro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all leads and lifts.

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the directio...

•

Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and ap...

•

Providing Neat cement punning to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing comple...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 with all leads and lifts.

•

Providing ruled pointing to coursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery,...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all leads and lifts.

•

Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove...

•

Finishing walls with water proofing cement paint of required shade :Newwork (Two coats applied @ 4.84 kg/10 m²) to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, mo...

•

G.I. pipes 40 mm dia with all leads and lifts.

•

Side Table for Teak Wood Executive Table : Of size 36"x20". Teak wood Leg size 2" x 2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer. Table to be provided with one Keyboa...

•

Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet wit...

•

Teak Wood Officer Table : (Accounts Officer Table) Of size 7'x3'x30". Made out of 2.25"x2.25" Teak Wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm Commercial ply with 1mm l...

•

Computer Table: Of size 4' x 2' made out of PLPB. Table should consist of 1 Keyboard, Right side 1 Drawer with 1 Cupboard inner side one shelf with all leads and lifts.

•

Office Table MDF ( Suprident Table, Size 6'X3' ) : Of size 6'x3' or 5'x3'. Made out of 18mm MDF one key boardand 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. Ha...

•

Teak Wood Raton Bottom Chair : (Seat with cushion & back with teakwood Patti) leg size 2"x1.5" with front and back legs of size 37"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Se...

•

Teak Wood Revolving Chair : Chair upper construction seasoned teak wood with melomon polish, Stain less steel 5 caster wheel legs, Hydraulic height adjustment. The Chair shall be neatly finished and p...

•

Teak Wood 'S' Model visitor chair: Front & Back legs made of 2" x 1.5" section along with design . Seat made of 3x 1.25" frames , Handles made of 2.5" x 1.5" section. Seat with 1.5" x 3/4" pattis. Alo...

•

Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin with all leads and lifts.

•

Computer Work Station of size 4' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB. Each work station should be of size 3'x2'. (W...

•

Wooden Rack : (Teak Wood) Of size 6' x 3' x1.5'. Made out of teak wood frame of section 2.25"x2.25" and supporting patties of thickness 3"x1.25". Panel to be made out of 12mm plywood with veneer on th...

•

Notice Board : Of size 5'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outersi...

•

Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provi...

•

Teak Wood Dias Table : Of size L-6'xW-36"xH-30". Made out of Teak wood Dias Table leg size-3"x3". Table Top patti- 4"x1.25" and bottom portion shall be 2"x1". The top of the Table shall be provided wi...

•

Auditorium Chair : Push back. Supply and installation floor/Riser Mounted seating system comprising common upright support assemblies of high strength steel construction and powder coated finish, Auto...

•

Teak Wood Sunrise Cot Double : Of size 6.5'x5' (without side box) Head side -5'x3"x2"-02 Nos. Panels 5'x32"x1.5"-01 No. Average. Leg side-1.5'x3"x2"-02 Nos. Panels - 5'x18"x1.5"-01 No.- Average. Base ...

•

Teak Wood Nagin Teapoy : Of size 3'x2'. Made out of Teak Wood leg size 3"x3" with carving. Top glass frame of size 3"x1.1/4" & 2"x 1.5" with 8mm tinted glass. Bottom magzine shelf required with 1.5'x3...

•

Wooden Rack : (Teak Wood) 4' x 3' x1.5'. Made out of teak wood frame of section 2"x2" and supporting patties of thickness 3"x1.25". Panel to be made out of 8mm plywood with veneer on the outer side . ...

•

Teak Wood Damaru Sofa Set : 1+3+1 with teapoy and cushion, front and back 4"x4" with turning. Sofa side bars 3.5'x1.25". Handle support patti 4"x1.25" and 2"x3", handle 6"x1.25". Seat and back support...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing & Fixing in position Acoustical wall panelling with Integral Densified Square Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels tiles with fabricated galvanised mi...

•

RAIN WATER HARVESTING

•

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

•

Supplying, filling, spreading &leveling gravels of size range 5 mm

•

to 10 mm, in the recharge pit, over the existing layer of boulders, in

•

required thickness, for all leads & lifts, all complete as per...

•

Supplying, filling, spreading &leveling coarse sand of size range 1.5

•

mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engin...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

STATUE, TC, GENERATOR, KEB DEPOSIT

•

Casting, Supply, Erectinig and fixingof 12 feet height Bronze statue of ltittur Rani Chanriamma, Shri. Sangoli Rayaiina Dr. Baba Saheb Ambedkar Standing posture , Mahatama Gandhiji 25 ft in sitting p...

•

Add 0.8% for preparing DPR & structural design

•

External electrical works (TC)+ Generator

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Line of Credit Circular 22.08.22 (1).pdf

Instructions to Tenderers • 0.44 MB

New_Royalty_Circular.pdf

Technical Information / Worksheet • 1.09 MB

Building SPecification.doc

Technical Information / Worksheet • 0.40 MB

Office Building Draft notfn.docx

Instructions to Tenderers • 0.06 MB

gst circular new.pdf

Tender Submission Guidelines • 1.82 MB

KW-4 Office Building.docx

Tender Document • 10.93 MB

electrical_tech_specifications.pdf

Technical Information / Worksheet • 0.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF OFFICE OF THE EXECUTIVE ENGINEER, KNNL, GRBCC, DIVISION NO-04,CHIKODI, TALUKA CHIKODI BELAGAVI DISTRICT

Karnataka Neeravari Nigam Limited

KNNL Division GRBCC Div No 4 Chikkodi | Karnataka

Amount: ₹5.0 CrCloses: 11 Oct 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published26 Sept 2024
Closed11 Oct 2024
Retendered26 Sept 2024