Improvement of WSS to SC Villages Kharanal, Malghota and Nagan in Tehsil Baijnath District Kangra HP

Excavation in earth work and filling in 15 cm layers in foundation and plinths including ramming watering and consolidating upto a lead of 20 metres and lift upto a 1.5 metres complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Excavation In foundations, trenches etc., in earth work,lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in alead of 20 metres complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Boulder/stone filling behind ground floor dry hand packed tightly compelete under lean concrete to prevent the entry of surface water complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 20 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing and laying cement concrete 1:4:8 (One cement is to four sand is to eight graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including entring,shuttering,strutting and propping etc. with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing and laying cement concrete 1:5:10 (1cement:5sand: 10graded stone aggregate 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining wall/breast wall, the size of plums shall usually 150mm to 300mm as per HPWD / JSV specification complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .

Providing & laying 60mm thick interlocking paver block in Grey /Colour cement M-35 to M-40 grade as per IS 15658 - 2006 of following make Deck/ Rediron /Pooja/ NTC / Revomic / Vyara and any other approved make. 60mm thick and under layers of sand 60mm average thick complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge. 60mm

Providing and laying of double charge tiles vitrified tiles in floors antiskid water proof stain and impact resistance heavy duty Nitco or equivalent make size 600x600x10mm in flooring kerb laid over 12mm thick with cement mortar (1cement:3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing fixing Junction Box complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing fixing Celling Fan Box complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing & fixing PVC Pipe 2.0mm Thick complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing & fixing PVC Pipe Bend complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing & fixing PVC Pipe 1.0mm Thick complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Wiring for light point/Fan point/exhaust fan /Call bell point with 1.5 sq mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm HRFLRS/PVC insulated single core copper conductor cable as required :Group C.

Supplying and fixing Metal Box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 Amps. Socket outlet and 15/16 Amps. Paino type switch, connections, painting etc as required .complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing Wiring for light power plug with 2x2.5 sq.mm PVC insulted heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 1.5 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing Wiring for light power plug with 2x1.5 sqmm PVC insulted heat resistant flame retardant (HRFLR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. 4 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Providing Wiring for light power plug with 4x0.75 sq.mm PVC insulted heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 2 No. 4 Sq.mm HRFLRS/PVC insulated single core copper conductor cable for earthing as required. complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s) complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Bulk head fitting,CFL type (Category-A) complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.

Supplying and fixing brass batten/angle holder including connections etc as required. complete in all respect in all leads and lifts as per the direction and Entire so the Satisfaction of Engineer in Charge.