PROVN OF DEDICATED TRANSFORMER OF 160 KVA CAPACITY ALONGWITH SERVICE CABLE 440V FOR INSTALLING 04X COMBAT WEAPON TRAINING SIMULATOR FOR TRG RECT (AGNIVEER) AT RAMGARH CANTT

Amount

Supply, installation, commissioning and testing transformer copper wound winding, step down, out door type, complete with all standard fitting of capacity 160 KVA, AC 3 phase, 3 wire primary, 4 wire secondary, 50 C/S type HT-11 KV, 3PH, LT-433 V oil immersed naturaly cooled with external cooling tube and having off load tap changing gear, hand operating, with tapping for voltage adjustment on primary side to vary secondary side voltage as per IS-2026, 4 wire 50 C/S with off load tap changing hand operted having tapping at (+/-) 2.5%, (+/-) 5% ,(+/-) 7.5%and (+/-) 10 % of rated voltage, with and incl first filling of transformer oil of suitable di-electric strength incl standard accessories as per IS and making connection on HT & LT side, mounted on PCC platform complete all as directed. Note : PCC foundation will be measured and paid seperately.

Supply and laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored electric power cables (heavy duty) with aluminum conductor 11000 Volt (earthed) grade cross sectional area 95 sqmm 3 core complete all as directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of following sizes complete all as directed.

3.5 core x 120 Sqmm (From Transformer to Prop LT Panel)

3.5 core x 185 Sqmm (Prop LT Panel to 3 TC CWTS OH line pole)

3.5 core x 95 Sqmm (Prop LT Panel to 5 TC CWTS)

3.5 core x 35 Sqmm (Prop LT Panel to 2 TC )

Excavation, in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for laying cable/pipes and getting out in hard/dense soil, complete all as directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick, complete all as directed.

Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the staring point, complete all as directed.

M & L,for Supplying and laying Un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as directed.

Ditto, but class HV, Type 1, flat, size 300mmx180mm x 40mm.

Supply and laying clean and dry sand free from sharp material (unwashed) in trenches around the cable for cushioning complete all as directed.

Supply and fix, danger notice plate of size 25 cm x 20 cm x 1.6 mm thick mild steel sheet vitreous enameled white, with letter, figures and conventional skull and bones in singal red colour and fixed with M.S clamps bolts and nuts of approved size for HT complete all as directed.

M & L for transformer Foundation for the size 3x3x1.5m after consisting of the following sequence: -(a) excavation in trenches in any type of soil.(b) Returning filling /Removing of surplus materials/soils.(c) 150 mm thick PCC 1:4:8 as in trenches.(e) brick work above ground level 1.00 mtr below ground level 300 mm(f) 15 mm plaster on side walls in 1:4 CM incl two coats of white wash (g) PCC coping 1:2:4 type B-2 complete all as directed.

M & L for chain link fencing all around transformer platform area with the following works for Size 3x3x1.5 mtr and providing one wicket gate.(a) post holes in any type of soil (b)PCC 1:2:4 type B-2 (c) Angle iron 65x65x6 mm flat iron 50x6 mm for post/support/wicket gate etc. (d) chain link fencing of size 25 mmx25mm of 3mm GI wire complete four side.(e) two coat synthetic enamel paint over a coat of red oxide primer complete all as directed.

Earthing complete with galvanized iron earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge earth plate not less than 1.5m below GL using galvanised iron strip 32×6mm as earthing lead to earth plate electrode by means of nuts, bolts and washers made of galvanized iron or steel earth wire protected by 40mm bore light grade GI pipe and connected for body earthing of feeder pillar box all as specified with & including PCC (1:3:6) type C1 pit and precast RCC (1:2:4) type B1, cover slab of size 300x300x50mm, with handle GI funnel, wire mesh, 40mm dia GI pipe medium grade for watering, charcoal and salt in alternate layer including necessary earth work on any type of soil and removal etc, complete all as specified and shown in electrical plate No 5 of SSR Part I complete all as directed. Note :- Earth wire up to 7.5 meter connected to earth point shall be deemed to be included in unit rate.

Supply and fix cable termination jointing kit for 11 KV grade cable, Heat shrink type complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 sqmm, outdoor type complete all as directed.

Supply and fix cable termination jointing kit for 11 KV grade cable, Heat shrink type complete with jointing material and accessories suitable for 3.5 core X 120 Sqmm XLPE, armoured, Aluminium conductor cable outdoor type complete all as directed.

S & F in repair cross arms bracing supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coat of aluminium paint over one coat of zinc chrome primer complete all as directed.

M & L Steel tubular swaged poles complete with MS base plate Continuously welded to pole, finial taper plug, bolts, nuts & screws as specified type 410 SP- 55 (11 metres long) includind two coat of black bituminous paint internally throughout and externally upto embedded portion and including applying two coats of synthetic enamel paint over a coat of red oxide primer with Red and Yellow strip of 30 cm each upto 1.5 m height and two coats of aluminium paint over a coat of red oxide primer externally on remaining exposed surface after eraction in position incl prepration of surface, etc complete all as directed. (Note :-Earth work ,PCC and copping will be measured and paid for separately under respective item.

Supply & installation HT 11 KV outdoor type gang operated air-break switch suitable for horizontal or vertical mounting with drop out fuse having 12 insulators of rating 200 Amps complete all as directed.

Supply and fix for HT 11 KV, lightning arrestor explusion type complete with all fittings, transmission class, discharge capacity 65 kilo amps complete all as directed.

M & L for cement concrete for coping of poles using B-1 1:2:4, 20 mm graded aggregate, smooth finishing without using extra cement complete all as directed.

M & L for cement concrete for foundation fillings and mass conctere type C-2 1:3:6 using 40 mm graded aggregate complete all as specified and directed.

M & Laying cement concrete for foundation fillings and mass conctere type D-2 1:4:8 using 40 mm graded aggregate complete all as directed.

Supply, install, commissioning and testing in provn of plinth mounted LT panel board outdoor type factory made CPRI approved, fabricated out of 3.15mm thick CRCA sheet ,dust and vermin proof ,totally enclosed metal clad ,single door ,accessible from front side with locking arragement, 3 phase 4 wire system at AC 440V,50 Hz with color coded copper bus bar of rated current capacity 300 Amps complete powder coated with two coat of synthetic enamel paint over a coat of anti corrosion primer and mounted on angle iron of size 40x40x5mm grouted in PCC foundation including earth work and excavation complete suitable to accommodate the following accessories:- (i) Multifunction meter 0-200 Amps ,digital type 01 Nos (ii) Panel indicating lamp LED type (Red,yellow & Blue) with holder and fuse holder 230/240 Volts ,AC- 01 set (set of three) (iii)Panel instrumental wiring with FRLSH 4 sqmm copper counductor cable single core of required length -01 Job INCOMER (iv)Four pole MCCB 200 Amps ,50 Hz,415V with rupturing capacity 25 KA ,adjustable thermal magnetic type -01 No OUTGOING (v) Four pole MCCB 160 Amps ,50 Hz,415V with rupturing capacity 16 KA , adjustable thermal magnetic type -04 No NOTE :- (a) The height of panel should be 0.60 mtr from ground level with PCC foundation. (b) Cost of construction of platform for pane of brick masonry work in CM 1:6 with foundation PCC 1:4:8 ,type D-2, including plaster in 1:4,PCC coping 1:2:4 (20mm thick stone aggregate ) deemed to be included in the item rate .No extra payment wiil be made.

arics infrastructure (BID ID -3355026)

MONA GENERATOR SEVICES PVT. LTD. (BID ID -3363330)

HUMERS INFRATECH (BID ID -3361198)

AKSHITA ELECTRICAL (BID ID -3354310)