REPAIR REPLACEMENT OF INTERNAL WIRING OF HANGER LIGHTS, ELECTRIC AND MECHANICAL CONNECTION OF HANGER DOORS AND OTHER CONNECTED WORK FOR HANGERS IN TECHNICAL AREA AT TEZPUR UNDER GE (AF) TEZPUR

Amount

S & F in repair for three core 1.5 sqmm FRPVC insulated & PVC round sheatehed multi core bright annealed bare copper conductor flexible cable for voltage grade up to 1100 V . Colour of cores are red,blue,yellow & yello/green for earthing and sheathed colour is black complete all as specified and directed.

S & F in repair for three core 2.5 sqmm FRPVC insulated & PVC round sheatehed multi core bright annealed bare copper conductor flexible cable for voltage grade up to 1100 V . Colour of cores are red,blue,yellow & yello/green for earthing and sheathed colour is black complete all as specified and directed.

S & F in repair for Limit switch 1 NO +1 NC, 415 Volt, 50 HZ, 1.5 A, AC15/ DC 13 thermal current 10 A/240 V AC/30 V DC rated impulse voltage 1.5 KV complete all as specified and directed.

S & F in repair for LED illuminated push button actuatorswith ultra bright LED complete all as specified and directed.

S & F repair for 3 pole contactors AC operated for controlling 3- phase motors and power circuits upto 690 V AC with auxiliary contacts 1 NO & 1 NC , 22 Amps AC1 duty and 9 Amp AC3 rating 415 V , 4 KW, with front mounted single pole add on blocks CAX-10 & CAX-01 complete all as specified and directed.

M & L for Cleaning , Oiling and greasing of penion and chain of electric motor for mechnical/electrical operated door complete all as specified and directed. Note: oil and grease are included in quoted rate.

Taking out/taking down old unserviceable, underground cable of any size and 3.5/4 core from any location , keeping in safe custody and relaying & connecting after replacement of straight through joint complete all as specified and directed. Note : (i) Excavation & earthwork & joint kit shall be measured and paid seperately (ii) cost of takingout joint is included in the unit rate of this item (iii) Using of old brick and PCC Cable Cover

Excavation in trenches,n exc 1.5 m wide and n exc 1.5 m in depth; for foundation laying of cables ,etc or for shafts,wells,cesspits,manholes,pier holes,etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/lose soil complete all as specified and directed.

Returning, filling in including spreading,levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil under floor complete all as specified and directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for sand cushioing for cable protection complete all as specified and directed.

M & L straight through joint ,heat shrinkable type suitable for LT under ground cable of size 185 sqmm to 300 sqmm 3.5 core complete all as specified and directed.

S & F in repair for MCCB four pole 125 Amp 25 KA with thermal magnetic release complete all as specified and directed.

S & F in repair for MCCB four pole 160 Amp 25 KA with thermal magnetic release complete all as specified and directed.

S & F in repair for MCCB four pole 200 Amp 25 KA with thermal magnetic release complete all as specified and directed.

S & F in repair for MCCB four pole 250 Amp 25 KA with thermal magnetic release complete all as specified and directed.

S & F in repair for MCCB 400 Amp 4 Pole , Ics=100% Icu, 50 KA,with on off lever mechanism complete all as specified and directed. . Make C&S Cat part No CSCS400EM*4P or equivelent in ABB/L&T/Legrnad Note for item NO 17&18:- The MCCB shall be procured so as to fit in the existing LT panel. No additional alteration will be permitted to the existing LT Panel.

S & F in repair for MCCB 630 Amp 4 Pole , Ics=100% Icu, 50 KA, with on off lever mechanism complete all as specified and directed. Make C&S Cat part No CSCS630EM*4P or equivelent in ABB/L&T/Legrand

S & F in repair for MCB SP 6 to 32 Amp C series complete all as specified and directed

S & F in repair for MCB SPN 6 to 32 Amp C series complete all as specified and directed

S & F in repair for MCB four pole 63 Amp C series complete all as specified and directed

S & F in repair for MCB four pole 125 Amp C series complete all as specified and directed

S & F in repair for MCB four pole 100 Amp C series complete all as specified and directed

S & F in repair for on load changeover switch -disconnector 4 Pole 630 Amp in sheet metal enclouser complete all as specified as directed.

S & F as in repairs integral LED aviation light comprising die-cast of aluminium housing with poly-carboate encloseure 302 Nos Led are provided Make:- Bajaj BGAV 302 LED or equivalent in crompton Greaves/Phillips/Wipro

S & F as in repair for 72W LED (CCT 5700-6500K), street light made of aluminium die case housing with powder coating with toughned glass, having excellent thermal management along with IP66 protection, complete all as specified and directed by Eng-in-charge. With efficiency not less than 110lm/W along with SPD of 10KV included in the quoted rate. All the LED fixtures shall be warrented for a period of 5 Years against servecibility / Performance NOTES : (i) Cost of necessary T&P items shall be deeemed to be included in the quoted rate (ii) Cost up to 1m of 3core wire for connection are included in the quoted rate.

S & F as in repair for 100 Watt LED ( CCT 5700 - 6500 K ), cradle / surface mounted Flood light made of aluminium die cast housing with power coating, having excellent thermal management along with IP 66 protection with clamp as per site requirment complete all as specified and directed by Engr-in-charge. with efficiency of 130 lm/W and lumen output of >= 11000 lumen .All the LED fixtures shall be warrented for a period of 5 Year against serviceability / Performance. NOTES : (i) Cost of necessary T&P items shall be deeemed to be included in the quoted rate (ii) The hanger/sunselter/REV/height may vary from 12m to 22m, the same shall be kept in mind before quoting rates. (iii) Cost up to 1m of 3core wire for connection are included in the quoted rate. (iv) Cost of necessary fitting and fixtures including clamps for surface mounting shall be included in the quoted rate. (v) If the clamp is not provided in the given make , it shall be the responsibility of the contractor to provide the same and the cost for the same is deemed to be included in the quoted rate. SAFETY: As the work has to be executed at height of more than 10m, the contractor shall take all necessaryprecautions while execution and shall provide safety equipments to the labour.

S & F as in repair for 150 Watt LED ( CCT 5700 - 6500 K ), cradle / surface mounted Flood light made of aluminium die cast housing with power coating, having excellent thermal management along with IP 66 protection with clamp as per site requirment complete all as specified and directed by Engr-in-charge. with efficiency of 130 lm/W and lumen output of >= 11000 lumen .All the LED fixtures shall be warrented for a period of 5 Year against serviceability / Performance. NOTES : (i) Cost of necessary T&P items shall be deeemed to be included in the quoted rate (ii) The hanger/sunselter/REV/height may vary from 12m to 22m, the same shall be kept in mind before quoting rates. (iii) Cost up to 1m of 3core wire for connection are included in the quoted rate. (iv) Cost of necessary fitting and fixtures including clamps for surface mounting shall be included in the quoted rate. (v) If the clamp is not provided in the given make , it shall be the responsibility of the contractor to provide the same and the cost for the same is deemed to be included in the quoted rate. SAFETY: As the work has to be executed at height of more than 10m, the contractor shall take all necessaryprecautions while execution and shall provide safety equipments to the labour.

S & Fas in repair for 200 Watt LED ( CCT 5700 - 6500 K ), cradle / surface mounted Flood light made of aluminium die case housing with power coating, having excellent thermal management along with IP 66 protection with clamp as per site requirment complete all as specified and directed by Engr-in-charge. with efficiency of 130 lm/W and lumen output of >= 11000 lumen .All the LED fixtures shall be warrented for a period of 5 Year against serviceability / Performance. NOTES : (i) Cost of necessary T&P items shall be deeemed to be included in the quoted rate (ii) The hanger/sunselter/REV/height may vary from 12m to 22m, the same shall be kept in mind before quoting rates. (iii) Cost up to 1m of 3core wire for connection are included in the quoted rate. (iv) Cost of necessary fitting and fixtures including clamps for surface mounting shall be included in the quoted rate. (v) If the clamp is not provided in the given make , it shall be the responsibility of the contractor to provide the same and the cost for the same is deemed to be included in the quoted rate. SAFETY: As the work has to be executed at height of more than 10m, the contractor shall take all necessaryprecautions while execution and shall provide safety equipments to the labour.

M & L as in repair Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead GI Strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including 40 mm bore GI pipe light grade pipe all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as directed. Note:-(i) Cost of this item included the excavation work,coal,salt,PCC, RCC pit cover in the unit quoted rate.

S & F as in repair Gongbells single phase 220/250 V of size 30Cm (12") with connecting wire complete all as specifide and directed. Make Kheraj or equivelent

Repair/replacement of door of floor mounted outdoor/indoor cubical type LT Feeder Pillar Box of various sizes, taking necessary shut down, by means of electric welding with suitable size of GI Sheet of thickness 2.0 mm with replacement of locking arrangement and two coats with synthetic enameled paint of existing colour complete all as specified and directed. Note: cost of Sheet approx not more than 1 sqm are including in quoted rate.

Shri A. K. Goswami

M/S Annu Electronics