Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC | ₹43.3 L Quoted ₹43.8 L | L1 | Accepted-AOC BEING LOWEST AND REASONABLE BIDDER |
| 2 | L2₹43.9 L+₹5,991.40 (0.14%)Rejected-Finance | ₹43.9 L+₹5,991.40 (0.14%) | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
| 3 | L3₹44.8 L+₹1.0 L (2.34%)Rejected-Finance 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | ₹44.8 L+₹1.0 L (2.34%) | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
| Sl No | Description | Qty | Unit | Badri Electricals L3 | Dighard Electricals L2 | shivalay corporation L1 |
|---|---|---|---|---|---|---|
| 1.00M&L for repair and rectification of external LT electric supply complaints on 1100 Volts grade, over head/underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:- | ||||||
| 1.01 | Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.
Note:- Single phase/two wire or 3 phase/4 wire system will be considered as one job for payment purpose. | 10 | EACH | 200 ₹2,000 | 155 ₹1,550 | 100 ₹1,000 Lowest |
| 2.00Taking out existing cable of following sizes from Junction boxes/overhead lines/LT Pannels/Poles/PCC Coping and cut out the worn out/burnt portion of cable, extend the cable from loop including excavation and re-fixing the same after providing new lugs using crimping tools, providing heat shrinkable end termination joint of suitable size as required and as directed by Enr-in charge:- | ||||||
| 2.01 | 3.5 Core 16 Sqmm to 50 Sqmm | 300 | EACH JOB | 120 ₹36,000 | 155 ₹46,500 | 50 ₹15,000 Lowest |
| 2.02 | 3.5 Core 70 Sqmm to 240 Sqmm | 120 | EACH JOB | 150 ₹18,000 | 240 ₹28,800 | 60 ₹7,200 Lowest |
| 2.03Note :- (i) Aluminium lugs, LT end Jointing Kits, Cable protection Pipe, Excavation, Returning Filling, Removing, Sand , tape roll and PCC copying of poles if required at site will be measured and paid separately under relevant items. (ii) Taking out old Bricks/cover will be re-used as cable protection. (iii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes.Repairs of PCC coping shall be measured and paid saperatly. | ||||||
| 3.00Supply and fixing aluminium cable lugs ( lugs are made from 99.5% pure aluminium) as per IS of following Size;- | ||||||
| 3.01 | 240 Sq mm | 20 | EACH | 120 ₹2,400 | 122 ₹2,440 | 100 ₹2,000 Lowest |
| 3.02 | 185 Sq mm | 30 | EACH | 80 ₹2,400 | 76 ₹2,280 Lowest | 80 ₹2,400 |
| 3.03 | 120 Sq mm | 80 | EACH | 50 ₹4,000 Lowest | 55 ₹4,400 | 50 ₹4,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Aug 2026, 6:00 pmClosed
GE (AF) BARODA
GE (AF) BARODA ,DARJIPURA , GUJARAT-390022
REPAIR, REPLACEMENT AND DAY TO DAY MAINTENACE OF LT DISTRIBUTION SYSTEM, LT POLES AND CONNECTED ITEMS AT DARJIPURA AT AFS VADODARA
2026_MES_780504_1
8201/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE (AF) BARODA, DARJIPURA, GUJARAT-390022
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (AF) BARODA
₹90,000
Yes
7 Sept 2026
24 Jul 2026
24 Aug 2026
24 Jul 2026
22 Aug 2026
8 Aug 2026
25 Jul 2026 - 1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1M&L for repair and rectification of external LT electric supply complaints on 1100 Volts grade, over head/underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:- | |||||
| 1.01 | Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.
Note:- Single phase/two wire or 3 phase/4 wire system will be considered as one job for payment purpose. | 10 | EACH | - | - |
| 2Taking out existing cable of following sizes from Junction boxes/overhead lines/LT Pannels/Poles/PCC Coping and cut out the worn out/burnt portion of cable, extend the cable from loop including excavation and re-fixing the same after providing new lugs using crimping tools, providing heat shrinkable end termination joint of suitable size as required and as directed by Enr-in charge:- | |||||
| 2.01 | 3.5 Core 16 Sqmm to 50 Sqmm | 300 | EACH JOB | - | - |
| 2.02 | 3.5 Core 70 Sqmm to 240 Sqmm | 120 | EACH JOB | - | - |
| 3Supply and fixing aluminium cable lugs ( lugs are made from 99.5% pure aluminium) as per IS of following Size;- | |||||
| 3.01 | 240 Sq mm | 20 | EACH | - | - |
| 3.02 | 185 Sq mm | 30 | EACH | - | - |
| 3.03 | 120 Sq mm | 80 | EACH | - | - |
| 3.04 | 95 Sqmm | 80 | EACH | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
8201PS.pdf
Tender Documents • 0.64 MB
BOQ_874295.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .