REPAIRING TO PLUMBING , PLASTERING , RECTIFICATION OF SEEPAGE AND ALLIED B/R WORKS IN OTM AND MD ACCN AT PANGODE MIL STATION TRIVANDRUM

Amount

Repairs to leakage of water in Bib tap, pillar tap stop cock, single valve of any description by changing the washer etc all as specified and directed.

Removal of air lock/blockage of water in GI / PVC tubing 15 mm/20 mm bore including cleaning the pipe or fittings etc and refixing the same in position etc all as specified and directed.

S&F in repairs 15 mm dia Bib tap brass chromium plated crutch or butterfly handle screwed down, screwed for iron/pvc pipe or for brass ferrule and fixed etc all as specified and directed..

All as per item No.3 here-in-before but of fancy type chromium plated.

S& F in repair 15 mm bore sizeBib tap of standard of PTMT any colour screwed for Iron/ PVC pipe etc all as specified and directed.

S&F in repair Pillar taps 15mm dia brass chromium plated , fancy type with long screwed shanks and fly nuts screwed for 15mm dia bore of pipe etc all as specified and directed.

S&F in repair Pillar tap size 15mm dia of PTMT any colour screwed for iron/PVC pipe etc all as specified and directed.

S&F in repairs chromium plated angle cock / stop valve cast copper alloy, screwed down, high pressure, screwed both ends for 15mm dia bore of pipe pvc/ iron pipe or for unions and fixed. all as specified.

All as per item No.8 here-in-before but angle/stop valve fancy type, chromium plated

S&F in repairs 32mm dia bore PVC waste pipe for WHB 60 cm long with union etc all as specified and directed.

All as per ser item Nos 10 here-in-before but 40mm dia for sink

S&F in repair Health faucet with push button flexible PVC pipe with steel lining of 1 mtr long PVC chromium plated suitable for 15mm pipe bore of pipe etc all as specified and directed.

S&F in repairs viterous china wash hand basin, white flat back size 550 mm x 400 mm including brackets and waste pipe including cutting for and pinning in ends of brackets or erecting stand etc all as specified and directed.

S&F Fixed in repair of viterious china wash down water closet pan (padestal pattern), superior fancy type white (excl flushing cistern and flush type) incl connection to drain (or outgoing pipe) and to flushing pipe, anti shyphonage etc with seat cover complete etc all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32 mm mm dia for wash hand basin,glazed ware sinks etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc all as specified and directed.

All as per Ser item No.15 here-in-before but 40 mm dia for stainless steel sink all as specified.

S&F in repairs15mm dia bore UPVC tubing ASTM 1784 Sch 80 class III fixed complete to walls, ceiling or in floors etc, including taking down existing pipe, etc in(Upto four storey building) including using of necessary scaffolding etc all as specified and directed.

All as per item ser No.17 here-in-before but 20mm dia bore

All as per item ser No 17 here-in-before but 25mm dia bore

Repairs/adjustment to washer/syphone float /valve etc for high level or low level flushing cistern and making functional etc all as specified and directed.

S&F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete etc all as specified and directed.

S&F in repairs of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete etc all as specified and directed.

S&F in repairs PVC syphone with handle with internal fitting complete for low level flushing cistern etc all as specified and directed.

S&F in repair brass CP Grating doom 125 mm dia with waste hole and making good to floor all as specified.

All as per item No.24 here-in-before but in square shape and fancy type size100mmx 100mm .

S&F in repairs PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc complete etc all as specified and directed.

S&F in repairs vitreous china squatting pan , 'orissa' pattern, size 580 X 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including connection to trap, and to flushing pipe ,antisyphonage pipe, etc. complete includig making good to floor etc all as specified and directed.

S&F 110mm dia bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls including Taking down cast iron pipes/ PVC pipe including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipe laid in trenches floors or fixed to walls all as directed including earth work. Demoltion of PCC/Brick work and making good to match with existing surfaces (upto four storey building) including necessary scaffolding etc all as specified and directed.

.All as per item ser No. 29 here-in-before but 75mm dia

.All as per item ser No.29 here-in-before but 160mm dia

.All all as per item ser No.29 here-in-before but 50mm dia

S&F in repair PVC (SWR) branch piece, (Single Y or T ) equal or un equal 110mm dia of pipe etc all as specified and directed.

.All as per item ser No.33 here-in-before but 75mm dia of pipe.

S&F in repair PVC (SWR) bends any radius 110mm dia of pipe etc all as specified and directed.

.All as per item ser No.35 here-in-before but 75mm dia of pipe.

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and removing old trap and making good etc all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement etc all as specified and directed.

S&F in repairs stainless steel curtain rod with fixing brackets 25 dia pipe, etc all as specified and directed.

S&F in repairs chromium plated brass shower roses 125 mm size with or without swivel joints including fixing to steel/ pvc pipe or union etc all as specified and directed.

S&F in repair worn out wooden pelmet boxes or cup board shutter of 18/19 mm thick block boards, grade 2 quality interior grade, commercial type fixed with MS clips,screws and 2nd class hardwood plugs 30x30x40mm embedded in wall with cement mortar (1:3) complete etc all as specified and directed.

S&F in repair Aluminum handle, cast type anodised 75 mm size fixed with screw complete etc all as specified and directed.

Taking down cement plaster of any descripttion incl hacking out of joints, racking for key, scrubbing down with water etc all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of concrete/brick surfaces finished fair and smooth without using extra cement etc all as specified and directed.

.All as per item ser No.44 here-in-before but 15mm thick in CM 1:4

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling finished fair and smooth without using extra cement (Upto four storey building) etc all as specified and directed.

M & L for applying three coats of white wash including preparation of new plastered surfaces on ceiling complete (Upto four storey building) etc all as specified and directed.

M&L for applying two coats of oil bound distemper on preparation of new surfaces on walls complete etc all as specified and directed.

M&L for Applying two coat of acrylic exterior emulsion paint on surfaces evenly on externals walls (up to four storey bldg) as per manufactures instructions

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with steel staple or wooden bead etc all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from wooden/ steel frame glazed with putty for fixed with wooden beads etc all as specified and directed.

M&L sheet glass ordinery quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane etc complete all as specified and directed.

M&L Figured glass, Pin head type 3mm thick and glazing with oil putty or wooden beads n.exc. 0.50 sqm in each pane etc all as specified and directed.

S&F in repairs corner glass fancy type with stainless steel frame (200 mm x 200 mm)chromium plated screwed down for fixing to walls with screws all as specified and directed.

S&F in repairs toilet paper holder fancy type brass chromium plated screwed down for fixing to walls with screws complete etc all as specified and directed.

S&F in repairs brass chromium plated fancy type hand shower including fittings screwed down for fixing walls with screw complete etc all as specified and directed.

S&F in repairs fancy type plastic cabinets ivory colour fixing to walls complete 300 mm x450x 100 mm fixed to walls complete etc all as specified and directed.

S&F in repair towel rail 20 mm dia, D type 60 cm long of brass Chromium plated etc all as specified and directed.

S & F in repair for Aluminium alloy anodised ,sliding door bolt 300 mm long with haps staples (bolt type) and fixing clip of sheet , cast or extruded section and fixing bolt and sliding bolt of extruded sections or cast alluminium alloy complete etc all as specified and directed.

S & F in repair for Door closer hydralulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed using aluminium extruded section all as specified and directed.

S & F in repair for Aluminum anodised, barrel tower bolts of extruded section and fixed of 200mm long etc all as specified and directed.

M&L for 19-20 mm thick granite slab in any size in black colour, machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including cutting and polishing laying on 15 mm thick screed bed in CM 1:4 including demolition of existing finish / slab complete etc all as specified and directed.

Demolition of cement concrete (unreinforcement) as in ground floors or paving n. exc 15cm thick below or above ground level complete etc all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregateas in flooring, pavings finished even and smooth without using extra cement complete etc all as specified and directed.

M&L for glass dividing strips 3mm thick 38mm wide complete etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete etc all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces for backing of tiles (Upto four storey building) complete etc all as specified and directed.

M&L for glazed ceremic coloured tiles of size 300x200x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match complete etc all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces finished even and smooth (without using extra cement) complete etc all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 in two layer (10+5mm) finishing coat and mixed with water proofing compound as per manufacturers instruction or 3%by wt of cement on fair faces of concrete surfaces finished even and smooth (up to eight story Bldg) without using extra cement etc complete all as specified and directed. Note: Cost of water proofing compound will be measured and paid separately

Supply only liquid water proofing compound.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed by Engr-in-charge.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed .

S&F Aluminium anodised, Butt hinges 100mm long complete all as specified and directed .

S&F Aluminium handles, cast type, anodised of size 125 mm long, complete all as specified and directed by Engr-in-charge.

S&F Aluminium, anodised, barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed by Engr-in-charge.

Roughening of surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brrushing neat cement slurry with 3 kg of cement per sq metre.

M&L rendering in CM 1:3, 10 mm thick mixed water proofing compound @ as per manufacturers instructions or 3% by weight of cement finished even and smooth without using extra cement. Note : Water proofing compound will be measured and paid seperately.

M&L for APP modified water proofing membrane thickness not less than 4mm and weighing not less than 4.50 Kg/ Sqm reinforced with non-woven polyster, matt black finished ( wt not less than 150 gms / sqm), laying by torch application including minimum 100mm overlap over compatible primer @ 0.40Lit/sqm and finishing with solar refelective Bituminous aluminum paint 100 gms /sqm including dismantling and removal of exisiting unserviceable membrane etc complete all as specified.

Demolition of cement concrete (unreinforcement) as in roofs,floor (other then ground floors),beams,staircase,landings,chajjas and similar suspended work all as per specified and directed.

M&L for PCC 1:2:4 type B0 with 12.5mm graded granite stone aggrigate 25mm thick over RCC roof etc complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frame) etc complete all as specified and directed.

Taking down Shutters of any description n exc 1sq. m each etc complete all as specified and directed.

Taking down Shutters of any description exc 1sq. m n.exc 2sqm each etc complete all as specified and directed.

S&F second class hardwood plane, solid, straight chowkats and frames, wrought framed rebated on the solid,n rounded or chamfered, put togther with glue pinned at joints, supplied and fixed etc complete all as specified and directed.

S&F Glazed and skeleton shutters 35mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and directed.

S&F glazed skelton shutters 30 mm thick of 2nd class hard wood open rebated and prepared to receive glass/guage etc and rebated sash bar any number divided into squares, with plain chamfered or rounded, mitred beads for securing glass etc; sizes of members of shutters in SSR part-I,section 8,clause 8.24 (b) supplied and fixed to chowakhats complete etc complete all as specified and directed.

S&F Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed.

S&F mild steel flats as in hold fasts, grill support to windows etc complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specified and directed.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 100mm long etc complete all as specified and directed.

All as per Sl No 92 here-in-before but 150mm long

All as per Sl No 92 here-in-before but 200mm long

S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long etc complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium with galvanised MS hinge pin, anodised and fixed Type B-21 etc complete all as specified and directed.

All as per item 96 here-in-before but 75mm long Type C-21

S&F Extruded aluminium alloy handles, fabricated type, anodised,125 mm long etc complete all as specified and directed.

All as per item 98 here-in-before but 75mm long

Supply and Fix mild steel work for window guard bar , plain, let in and fixed independtly in wooden frame conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enemel paint over a coat of prink primer etc complete all as specified and directed.

Demolition of Brick work or stone/boulder masonarybuilt in cement mortor including all quoins, arches, pillarsetc complete all as specified and directed.

M&L for walling of Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortor 1:6 etc complete all as specified and directed.

S&F in repairs butt hinges, medium weight cold rolled mild steel, 100mm long etc complete all as specified and directed.

All as per item 104 here-in-before but 75mm long

S&F in repairs floor door stopper of aluminium alloy body and tongue with hard drawn steel spring 140 mm long etc complete all as specified and directed.

Repairs of WC joint and fitting with white cement and wet set (M seal) epoxy putty of pidilite to stop leakage and finished properly etc complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes & pipes includings bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm etc complete all as specified and directed.

All as per item 108 here-in-before but without drainage board size overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repair Stainless steel plate rack of size 90x78x23cm using 1mm thick sheet standard pattern etc complete all as specified and directed.

Taking down WHB or sink of any size and refixing the same by using new rack bolt/ brackets etc complete all as specified and directed.

AKASH CONSTRUCTIONS

DJ GROUP