Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.8 Laccepted-aoc | ₹5.8 L | accepted-aoc |
Tender Value
₹5.8 L
EMD Value
₹5,836
Closing Date
20 May 2026, 4:00 pmClosed
GUDIVADA MUNICIPALITY
Gudivada
Supply and erection of new pump sets, Pipelines materials for Rapid filling to Old SS tank under Summer Action plan 2026 in Gudivada Municipality Est:6,90,000/- Fund: General
933389
171-2025-26-GDV-Gen
OPEN - NCB
Water Supply
KRISHNA
6 documents required · 6 mandatory
₹207
₹5,836
4 Aug 2026
13 May 2026
13 May 2026
Supply and delivery of 7.5HP mono block pumpset with Suc X Del (mm):150 X 150 mm., RPM:1420, Frequency/Phase: 50Hz/3phase Make: Texmo, Taro, Lubi,Kirloscar model no. KS-1012+ Liquid Type:Raw Water, Flow (LPS): 72.5 to 30 LPS, Head (mtr.): 14.0 mtr Including cost of MS Tralley with wheels for transporatation and also 150mm dia D/F MS bend, welding with 32mm dia Gl bend with pve ball valve at delivery side of the pump set inluding cost and conveyance of all materials and transportation ete complete as directed by the departmental Authorities(Quotation)
Supply of 3 Core 4.0 Sq mm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / Polycab / Havells / KEI/Gloster SSR2024-25,ELEC-1.6.3 MAT-02796
Fabrication ,transportation and and supply of wall mounted control panel board suitable sintex box for cable entry fabricated , lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.Makes: As per list of recommended brands .Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.Single phase preventor of suitable range - 1No.32 A TP, 10KA MCB. - 1NoIndication lamps (R-Y-B) with switch control - 1setVoltmeter & Ammeter selector switch - 2 NosSupply and fixing of ISI Mark suitable capacitorUpto 10 HP with DOL Starter of
Supply and delivery of bolts and nuts with double washers including conveyance etc., complete, but excluding taxes. (1/2" to 1") ssr 2024-25 mat-08262
Supply and delivery of 150mm dia Rubber packings for Flange joints Including cost of all taxes etc,. Complete
But Jointing charges for 160mm di OD HDPE pipe using with jointing machine(Heater) including cost of machine hire chargs and wages of Hdpe jointer and helper As directed by the departmental authorities
Manufacture, Supply, & Delivery of MS Flanges in various sizes for welding to MS pipes including transportation to anywhere in A.P. Excluding all taxes.SSR 2024-2025,MAT-07496 and MAT-07498 a) 150mm dia 12mm thick MS flanges
Supply and delivery 150mm dia PVC Foot Valve including cost and conveyance of all materials labour charges etc., as directed by the departmental authorities.
Supply and Delivery of 150 mm dia CI Hose Collers (Screw type with out flang) including cost of materials and transportation charges etc., complete as directed by the departmental authorities
Supply and Delivery of 150 mm dia Hose Clamps ncluding cost of materials and transportation charges etc., complete as directed by the departmental authorities
Supply and delivery of 150mm dia (6") canoflex pipe As per directed by the departmental authorities Quotation (5 no'S X 6 Rmt)
Manufacturing and supply of circular MS screen(Tirulu) for fixing around the foot valves of size 150/200 mm dia for stopping the water hyacinth etc,. Including cost and coveyence at the site of the work etc,. Complete.
Supply and delivery 150mm dia PVC Foot Valve washers including cost and conveyance of all materials labour charges etc.,complete.
Supply of Hydraulic Excavator Ex-200 Proclianer on hire basis for earth work excavation and loading to vehicles and also levelling of earth as directed by the departmental authorities including all fuel charges wages of driver helper and fuel charges and including all taxes etc complete.
one time Transportation charges for Hydraulic Excavator Ex-200 Proclainer from existing place to workspot etc,. Comlete. as directed by the departmental authorities
Manufacture, Supply, & Delivery of HDPE Pipes 160MM dia ,6kg/sq cm conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)MAT07268
Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.Outer Dia. of pipes in 160 MM
Supply and delivery of 150 MM Dia screw type CI Flanges
Supply and delivery of 150MM X 0.10 mtrs Long CI D/F Pipes
Supply and delivery of 150MM X 0.25 mtrs Long CI D/F Pipes
Supply and delivery of 150MM DiaX 90 degree MS short Bends
Supply and delivery of SERVO 140 Gear oil(C-OIL)
Supply,delivery and fixing of PVC Green mesh in canal for protection of weed to ,moter foot valves including cost of PVC green mat and fixing labour charges and necessary specials i.e GI wire and coconut rope etc.
Supply and delivery of Plastic net for fixing around the MS tirulu for protection to foot valves from weed and naachu etc.. Complete.
Supply and delivery of Plastic tarpalins with asize of 3.00mts X3.00mts
Supply,delivery and fixing of casurina ballies in canal ,with a size of top 50MM dia bottom 75MM dia each ballies consists 3 Mtrs long ,using for protection for foot walls from weed and naachu including cost of ballies and fixing labour charges etc.. complete
Supply and delivery of Bamboos bundles (each bundles consits 10 bamboos with a length of 3 mtrs ) using for fixing of PVC green mat in canal for support fixing with casurina ballies including cost of baboos and transportation charges etc.. Complete
Supply and delivery of 150MM dia X0.15mtrs Long GI nipples
Supply and delivery of 10MM&12MM Packing rope of hindustan make (fysax brand )
Supply and delivery of Shalloke botteles
Supply and delivery of Thereds
Laying Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stiching charges and labour charges with 13.615 % overhead charges and contractors profits. (sand rate for filling is considered)
Supply and delivery of 150mm dai CI hose coller As per directed by the departmental authorities Quotation
Supply and delivery of 150mm dai (6") PVC foot valve screw type with approved make As per directed by the departmental authorities Quotation
Supply and delivery of 150mm dia (6") dai GI B class long bends As per directed by the departmental authorities Quotation
Supply and delivery of 40mm X 300MM dia long GI nipples As per directed by the departmental authorities Quotation
SUPPLY AND DELIVERY OF 3mm/6mm RUBBER PACKING INCLUDING CONVEYANCE ETC., COMPLETE, BUT EXCLUDING TAXES As per directed by the departmental authorities Sor2025-26,item No. MAT-08261
Supply and delivery of 150mm dia rubber washers of approved make and incedental responsibility bearing by agency as Per directed by departmental authorities Quotation
Labour charges for fixing of 7.5HP mono block pumpset motor starters and laying cables using with PVC pipes, fixing of fuse carrier board giving connections etc., complete As per directed by the departmental authorities Quotation
Supply of 40 amps 3 pole Isolator. Makes: As per list of recommended brands as category I.MAT03097
stage.html
html • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.01 MB
BOQ - New Pumpsets for Rapid Filling.xlsx
TENDER_DOCUMENT • 0.11 MB
NIT - New Pumpsets for Rapid Filling.xlsx
TENDER_DOCUMENT • 0.03 MB
SHEDULE - New Pumpsets for Rapid Filling.xlsx
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .