Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC VILLAGE GOROIMARI PO HALESWAR TEZPUR 784104 DIST SONITPUR ASSAM | SONITPUR | ASSAM | 784104 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹39.3 L+₹49,610.91 (1.28%)Rejected-Finance VILL BATABARI PO GHORAMARI DIST SONITPUR ASSAM 784105 | SONITPUR | ASSAM | 784105 | L2 | Rejected-Finance NOT L1 | |
| 3 | L3₹39.7 L+₹93,858.26 (2.42%)Rejected-Finance AIR FORCE ROAD GORAIMARI HALESHWAR TEZPUR SONITPUR ASSAM 784104 | SONITPUR | ASSAM | 784104 | L3 | Rejected-Finance NOT L1 | |
| 4 | L4₹41.1 L+₹2.3 L (5.95%)Rejected-Finance SAIKIA CHUBURI BORJHAR DEKARGAON SONITPUR ASSAM | SONITPUR | ASSAM | 784501 | L4 | Rejected-Finance NOT L1 |
Tender Value
₹38.9 L
EMD Value
₹77,800
Closing Date
24 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) TEZPUR
GE AF TEZPUR TEZPUR PO SALONIBARI DISTRICT SONITPUR ASSAM 784104
CERTAIN BR REPAIR AND REPLACEMENT WORKS IN MESS AREAS AND COOK HOUSE AND REPAIR MAINT OF VARIOUS BR WORKS IN MES INSTALLATION AND MISC WORKS AT AFS TEZPUR UNDER GE AF TEZPUR
2023_MES_590080_3
GE/AF/TEZ/8855/E8
Open Tender
Civil Works - Others
Item Rate
180 days
TEZPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TEZPUR
₹77,800
22 Aug 2023
9 May 2023
26 May 2023
9 May 2023
24 May 2023
9 May 2023
Amount
Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.
Demolition of cement concrete (unreiforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as directed.
Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed.
Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Materials and Labour for, broken bricks hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed.
Materials and labour for, plain cement concrete (1:4:8) type C-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Materials and labour for, plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Materials and labour for brick work with Sub Class ‘B’ bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:4), complete all as specified and directed.
Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fix for, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fix for, 100mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.
Supply and fix for, 100mm size, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
Supply and fix for, medium weight stainless steel butt hinges 100mm size, complete all as specified and directed.
Supply and fix in repairs for, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with and incuding necessary nails, 2nd class hard wood beading not exc.6 sqcm in cross sectional area, screw bolts and nut & bolts for MS window, complete all as specified and directed.
Supply and fix in repairs for, CP tubular towel rail 20mm dia and 450mm long, complete all as specified and directed.
Supply and fix in repars for, door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
Supply and fix in repairs for, hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement including taking down old one complete all as specified and directed.
Supply and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling CGI sheet roofing including plain GI sheets in ridges, hips, valleys and gutters, complete all as specified and directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including dismantling CGI sheet roofing including plain GI sheets in ridges, hips, valleys and gutters, complete all as specified and directed.
Material and labour for, 6mm thick non asbestos fibre cement building E-board (decorative), fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling flat or slopping including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in path/ hard standing, complete all as specified and directed.
Material and labour for 40mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for 50mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for 50mm thick plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for non skid ceramic tiles, coloured 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm conforming to IS 15622, economy class, grade B IIa on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and incuding 15mm thick screed bed in cement mortar (1:4), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Materials and labour for glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:3), including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.
Material and labour for chequered cement concrete tiles with grey cement and pigment, 20cm X 20cm X 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors and cut and polished over and including 20mm thick screed bed or bedding layer in CM (1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.
Materials and labour for, machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer of CM (1:6), including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.
Materials and labour for, machine cut kota stone slab 20-25 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick rendering in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existion old PCC in skirting and risers of stair case, complete all as specified and directed.
Material and labour for, 20mm thick granite tilts (of any type) work machine cut as in platform and floor, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including grinding and polishing and over and including screed bed or bedding 15mm thick CM (1:6) complete all as specified and directed.
Materials and labour for, 20mm thick granite (of any type) tiles machine cut, in wall lining laid over and including rendering 12 mm thick plastering in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.
Materials and labour for, rendering 5mm thick, cement plaster, in CM (1:4) mixed with water proofing compound as per manufactures instructions over and including 10 mm thick backing coat in CM (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)
Materials and labour for, rendering 5mm thick, cement plaster, in CM (1:4) mixed with water proofing compound as per manufactures instructions over and including 10 mm thick backing coat in CM (1:4) on fair faces of brick work or concrete surface in walls, including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. (Note: - Water proofing compound will be measured and paid separately)
Materials and labour for, rendering 10mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surfaces in walls and finished surfaces even and smooth without using extra cement, including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Supply only integral water proofing compound conforming to IS 2645-1975 complete all as specified.
Material and labour for, preparation of new plastered or unplastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
Supply and fix for, 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and providing and fixing new ones complete all as specified and directed.
Supply and fix for, 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
Material and labour for, preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer after applying three coats of wall putty and making the surface smooth complete all as specified and directed.
Material and labour for, preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound distemper, complete all as specified and directed.
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Material and labour for, complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 sqm on walls complete all as specified and as directed. (Note: The contractor shall furnish guarantee for the exterior acrylic emulsion paint and shall be responsible for effectiveness of the UV resistance, alkali and fungal resistance and dirt resistance of the painted areas during the guarantee period).
Material and labour for, preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
Material and labour for, preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for, preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.
Materials and labour for galvanized steel tubing, medium grade,15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down existing steel tubing, complete all as specified and directed.
Refixing the old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including taking up or down15mm galvanised steel tubing and connections, cleaning, complete all as directed.
Supply and fix in repairs for, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fix in repairs for pillar taps, cast copper alloy, with capstan heads, fency type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, complete all as specified and directed.
Supply and fix in repairs for, bib tap, fancy type, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.
Supply and fix in repairs for, 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed.
Supply and fix in repairs, for pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-110gms), complete all as specified and directed.
Supply and fix in reaprs for, 32mm bore waste coupling of PTMT (half or full threaded) (minimum weight 32mm 45gms), complete all as specified and directed.
Supply and fix for, grating doom 100mm dia of PTMT (minimum weight 25gms), complete all as specified and directed.
Supply and fix for, grating doom 125mm dia of PTMT (minimum weight 40gms), complete all as specified and directed.
Supply and fix for, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed.
Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old soil pipe with fittings, complete all as specified and directed.
Supply and fix in repairs for, 75mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed.
Supply and fix in repairs for, 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and directed.
Supply and fix for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.
Supply and fix for, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.
Supply and fix for, 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms), complete all as specified and directed.
M/S Shankar Boro
M/S Kangkans
Evergreen Firm
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .