Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
8 Oct 2026, 12:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEG/SEE
16 conditions · 5 needing a document upload
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor has to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will summarily be rejected.
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 'V/N'or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
As per CE/Works/HJP's letter no. ECR-HQ0ENGG(CONT)/0009/2025, dated 18.11.2025 "The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference."
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected.
"ELIGIBILITY CRITERIA:- Document required to be submitted in support of Technical Eligibility Criteria: Tenderer should have completed at least one similar single work. The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of works (as defined and approved by competent authority) for "At BJU - Provision of 750 V Power Supply for HOG testing at Newly washing pit at Coaching depot BJU." is (1) Erection of 11 KV or above voltage level sub station. (2) Erection and commissioning 11 KV or above voltage level line (over head or underground).
27 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Contractor should have to be registered with Employee Provident Fund Organization (EPFO). It is mandatory for contractor to submit PF code provided by EPFO with their tender offer. Also each contractor have to submit "UAN" of their worker with their offer and have to mention in tender document. It is mandatory. Otherwise offer will not be considered for further action and your offer will be summerisely rejected. You are also instructed to submit monthly payment challan to the person/labour engaged for execution of the work having valid UAN no with bill. This is to be followed strictly as per GCC & as per instruction of labour enforcement officer under Govt of India.
Inclusion of 'Letter of Credit' as Mode of Payment in Works Tenders or Service Tenders as per Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2016 remarks from Tenderer required.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Railway Administration reserves the right to change/Alter/Cancel the tender without any notice.
At BJU - Provision of 750 V Power Supply for HOG testing at Newly washing pit at Coaching depot BJU.
L-Open-26-27-15Dt16-09-26~ECR
L-Open-26-27-15Dt16-09-26
Open
Works - General
180 Days
Saran, Bihar
₹0
₹2.3 L
16 Sept 2026
16 Sept 2026
24 Sept 2026
33 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,14,52,997 | ||
| — | 2.00 | — | — | ||
| Description: Fabrication, Supply, erection (with foundation height should be minimum 4ft above ground level), testing, connection & commissioning of compact substation Each compact substation consisting of (a.) one no.500 KVA,11 KV/0.75 KV Transformer (Make- Schneider, Siemeans, ABB, CGL, Powerstar, Alstom & BHEL). (B) one no. RMU with one direct module and one fixed motorized VCB OF 630 A, RMU's Breaker compartment & cable compartment shall be internal arc tested for 21kA for 1 sec, VCB & ACB Make- ABB, L&T, Schneider, Siemeans (C.) One no. LT panel having 01 in-comer of 1000 A, ACB and 01 Outgoing of 630 A/750 V MCCB with suitable Digital ammeter, Digital Voltmeter, phase indicating Lamp RYB Colour Fuse, Selector Switch copper Busbar, Safety Items(Danger Board, Fire Extinguishing Rubber mat, Earthing Pole etc. Complete in all respect. CSS make- ABB, Schneider, Siemens, Powerstar & L&T. (Inspection by RITES and specification should be as per latest IS/IEC). | — | — | — | 49,80,000 | |
| — | 3.00 | — | — | ||
| Design, fabrication, supply, erection (with foundation) testing and commissioning of weatherproof, IP-55 Feeder pillar, panel enclosures to be treated through seven tank process for superior corrosion resistance and weather proofing powder/ epoxy coating to be provided for protection as well as to provide and elegant finish to the panels. Neoprene rubber gas kitting to be provided for dust proofing, wiring is to be done by multistrand, flexible copper conductor with identification ferried insulated socket, lugs, wire 5 harness/looms to be bunched and harried on saddles for mechanical protection with terminals to have ample space for case of cabling. Each component to be fully accessible for maintenance and reliability including panel inter connection nuts and bolts etc., each consisting of two no. of 400A/750V MCCB and 02 nos. female ZS coupler (01 no. on front and other on back side of panel) with suitable Digital Ammeter, Digital Voltmeter, LED phase indicator Lamp RYB colour, HRC fuse, Selector switch, copper busbar etc. MCCB Make- ABB, Schneider, L&T, Siemens, Alstom & CGL. (Inspection by RITES and specification should be as per latest IS/IEC). | — | — | — | 8,19,000 | |
| — | 1.00 | — | — | ||
| Provision, Fabrication and commissioning of 11 KV 3 phase Gang Operated Switch on the top portion of pre-erected H- pole/4 pole structure capacity 400 Amp conforming to IS: 1818 complete with drop out fuse conforming to ISS-9835 (Pt.II) of 1980 along with mounting channel/angle iron insulator etc. all respect including supply of all required material. | — | — | — | 7,400 | |
| — | 24.00 | — | — | ||
| Provision and fixing of 11 KV Pin Insulator at required site on the top of portion of pre- erected pole comp with large steel head G.I pin, nuts, washer etc as reqd. confirming to IS-731/1971 including supply of all required material for fixing with insulator. | — | — | — | 4,800 | |
| — | 12.00 | — | — | ||
| Provision and fixing of 11 KV Disc Insulator at required site on the top portion of pre- erected pole for 11KV over head lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts washers etc as required including supply of all required material for fixing with insulator (The tension clamp should be of suitable size and conform to ISI specification). Insulator Make- Kay, National Power Industries. | — | — | — | 7,200 | |
| — | 12.00 | — | — | ||
| GI pipe earthing with 4.5 M long x40mm dia. With salt & charcoal. Make of GI pipe TATA/Jindal or equivalent superior make. | — | — | — | 21,204 | |
| — | 120.00 | — | — | ||
| Supply & Laying of 6SWG GI wire as conductor earth electrode. | — | — | — | 1,440 | |
| — | 6.00 | — | — | ||
| Earthing with copper Plate earthing 600x600x3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. | — | — | — | 75,732 | |
| — | 100.00 | — | — | ||
| Supply & Laying of 25x5mm GI stripe as conductor earth electrode. | — | — | — | 24,400 | |
| — | 950.00 | — | — | ||
| Supply of 11 KV 3 core 120 mm² XLPE alluminium armored cable. | — | — | — | 13,22,400 | |
| — | 950.00 | — | — | ||
| HD D Machine for Horizontal boring of Railway across the Embankment /Road at a depth of 2.02 mtr. Below GL by contractor's own arrangement:- (450/300 mm dia hole) direction of site Engineer's in-charge at site. | — | — | — | 11,56,150 | |
| — | 12.00 | — | — | ||
| Supply and making of heat shrinkable outdoor end termination Kit for 11 KV 'E' XLPE 3 core 50 -95 mm² cable. | — | — | — | 1,28,412 | |
| — | 100.00 | — | — | ||
| Supply & fix. Of medium class GI pipe 80mm dia. Make TATA/Jindal For protection of UG cable. | — | — | — | 68,800 | |
| — | 900.00 | — | — | ||
| Supply of PVC insulated & sheathed arm. Al. conductor 1.1kV grade LT cable of size 4 x 400 sq.mm. | — | — | — | 27,36,900 | |
| — | 900.00 | — | — | ||
| Laying of cable depth of 3' partly under ground through suitable trench partly on wall, rail post through suitable clamp inclu. Excavation of cable trench either in rock/soil/concrete and covering by brick (14nos brick per mtr, sand, dressing of soil and connection to panel bd. to DB etc. as per site requirement.) | — | — | — | 94,959 | |
| — | 2.00 | — | — | ||
| Installation, testing, commissioning and supply of Polycarbonate type cable junction boxes IP65 cable size 16/25 sq.mm with metric knockouts for cable entry Box dimensions (LxBxH) (mm): 200x160x98 including other required material for fixing, Mounting and masonry work if required. Make - HENSEL, ABB, L&T & Sintex. | — | — | — | 4,200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC 2022
ATTACHMENT
GCCACS1-9.pdf
ATTACHMENT
Advancecorrectionslipno.10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
CEGEECRLetter.pdf
ATTACHMENT
Tenderdocument750VpowersupplyforHOGtesting.pdf Tender document
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
Tenderdocument750VpowersupplyforHOGtesting.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .