Underground Cable Scanning, Cable Laying/ Rerouting/ Dismantling and Associated Electrical Works for Preparation of Site for HBF Installation in PA Plant, FACT-CD, AMBALAMEDU

Underground Cable Scanning, Cable Laying/ Rerouting/ Dismantling and Associated Electrical Works for Preparation Installation in PA Plant, FACT-CD.

Conducting Subsurface Utility Engineering survey as per the Scope of work and Technical specifications as mentioned in Document No: TPS NO: TPS-PAP-USG-0625 at the proposed location of New Horizondal Belt Filter (HBF) in Phosphoric Acid Plant premises and other locations in FACT-CD using GPR for Underground Scanning to map underground utility and service lines such as PVC pipes, Rebar mesh, Iron pipes, electric and instrument cable, drain lines, pipes, etc., as per the instructions by Engineer in charge at a depth upto 5m from the level surface, providing instruments/ equipments, all accessories, arrangements for conducting survey and manpower etc. complete and preparing the findings in the format of layout and submitting drawings in AutoCAD format as required, Drawing with details shall be submitted in soft copies and FIVE sets of hardcopies.

Excavation in all types of soil including soft and hard strata (excluding rock requiring blasting), up to a maximum depth of 3.00 meters using mechanical excavator for the purpose of searching, identifying, and exposing underground utilities such as cables, pipes, or other services including back filling of the soil.

Demolishing and removing existing RCC flooring of maximum depth of 1 feet (plain or reinforced, as found) using mechanical equipment or manual tools, as needed, to locate and expose underground utilities such as cables, pipes, and ducts.

Laying/ rerouting of power/ control/ earth cable. The scope of work includes dismantling the existing LT power/ control/ earth cables of different sizes upto 3X185sq.mm, Armoured Aluminum Cable from old cable rack after removing the clamps and positioning the same on newly fabricated cable tray/ clamping through the walls. The cables shall be laid back, positioned, dressed and tied firmly on to the new racks. The cables shall be tied at an interval of 50 cm using 3 mm nylon rope. If cables are clamped through wall, clamping shall be done with SS/ Aluminum Clamps at an interval of 50 cm. Necessary material for tying/clamping of the cable shall be brought by the contractor.

Disconnection and dismantling of old and damaged Power/ Control/ Earth cables The scope of work includes disconnection and dismantling the existing LT power/ control/ earth cables of different sizes upto 3X185sq.mm, Armoured, Aluminum Cable from old cable rack after removing the clamps and Transportation of removed cables to scrap yard/ cable yard, as instructed by the Engineer in Charge.

Relocation of electrical utilities mentioned hereunder in Old Concentration Section Area to new location as instructed by Engineer In Charge. The scope of work includes relocation of (1) Lighting Auto Changeover Load Centre, (2) TPN for Load Centre, (3) Control Panel of Hoist above Filter Feed Pump Area, (4) Cable Junction Boxes ( 2 Nos.) in the Consentration Section Building of PA Plant to the new location within 20 meters. The work also includes disconnection of cables, fabrication of support structures for mounting the above facilities, minor chipping, drilling, masonry works, painting of the fabricated structures, glanding and termination of cables, etc.

Supply of LED Streetlight Fittings. Scope of work includes supply of 150W LED Street Light fitting with below given specifications. Construction: Pressure Die Cast Aluminium Housing with inbuilt tilting angle lenses Ingress Protection: IP66 or superior Luminous Efficacy: >110 Lumens Per Watt. Warrantee: 3 Years onsite replacement warrantee by the OEM. Contractor shall submit warrantee certificate from OEM and the local contact details for reporting complaints. Acceptable Makes: Havells/ Philips/ CG/ Bajaj/ Surya/ LT

Installation and commissioning of LED Light fittings. The work includes replacement of existing HPSV/HPMV/ MH light fittings in Phosphoric Acid Plant and installation and commissioning of light fittings. The mounting supports if required for installation shall be fabricated and supplied by the contractor.The scope of work also includes minor chipping, drilling, welding, masonry works, etc.

LAMOS TECHNOLOGY SOLUTIONS PVT LTD (BID ID -3254788)