1. Construction of Seed Storage Godown at RARS, Chintapalle 2. Construction of Threshing, Drying floor at RARS, Chintapalle

Construction of Seed Storage Godown and Threshing cum drying floor with RCC Slab at RARS, Chintaplle.

Seed Storage Godown Items

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with coarse sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete corresponding 1:4:8 as per IS 456 equivalent to 1:4:8 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 40mm Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level, curing concrete etc., and complete for finished item of work. (APSS No. 402)

Footings: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Pedestals: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Plinth Beam: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Rat proof Projection 100 mm thick: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Flooring Concrete: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Columns: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Tie beam at 2.10 m level: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Roof beams: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Roof slab 125 mm thick: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and complete for finished item of work. (APSS No. 901 & 903).

VDF (Vacuum Dewatered concrete Flooring) of 75 mm thick laid in panels of size 4m x6m or as per (internal floor area) M20 grade design mix for using 6mm to 20mm size SS5 graded machine crushed hard blasted granite metal including cost and conveyance of all materials like cement, fine, coarse aggregate etc., to site and excluding cost of seigniorage charges, machine mixing all centering charges, laying concrete, vibratng lift charge, curing including cost of cutting grooves by saw and filling with polysuplhide solution etc., as directed by the department (including labour charges for finishing CC flooring with vaccum dewatering process as per standard specificaton as directed by the department, etc., complete for finished item of work.

Plain Cement Concrete corresponding to M15 Grade as per IS 456 equivalent to 1:2:4 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 20mm Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level, curing concrete etc., and complete for finished item of work. (APSS No. 402) - Belt concrete

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-2008) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc.,and complete for finished item of work. (APSS No.126)

Refilling with useful available excavated earth (excluding rock) with a lead of 50 min trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work (APSS NO.309&310)

Filling with carted Gravel for foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc., complete including cost and conveyance of Crusher dust for finished item of work.

Basement: Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Super structure: Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer in charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904)

Basement: Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work. (SS 901,903 & 904)

Super structure: Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work. (SS 901,903 & 904)

Ornamental ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work. (SS 901,903 & 904)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work as per special spn: 1108

Providing and fixing RCC Jalies 50mm thick including all labour charges for fixing etc., complete for finished item of work.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new walls with two coats of acrylic emulsion paint of approved brand & shade over a coat of water based cement primer of interior grade I making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For internals walls.

Painting to new walls with two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) less than 50 grams/litre for exterior walls of approved brand & shade over a coat of water based cement primer of EXTERIOR gradell making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For Externals walls.

Supply & application White washing three coats with white cement paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials for:-White wash - White washing 3 coats with white cement

Threshing floor items

Earth work excavation for foundations (Manual means) of buildings, septic tank,sump,compound wall in ordinary soilsand depositing on bank for all lifts and with an initial lead of 10m and depth upto 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with coarse sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work(APSS NO.309&310)

Filling with carted Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and complete for finished item of work. (APSS No. 402)

VRCC M-20 Nominal mix (using 400kgs of cement)(1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDINGcost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) flooring concrete

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-2008) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work. (APSS No.126)

Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement/lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqem. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Refilling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work (APSS NO.309&310)

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer in charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904)

Supply & application White washing three coats with white cement paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials for:-White wash - White washing 3 coats with white cement

Supply and Fixing of ISI 25mm dia 1.8mm thick surface medium grade with IS:9537 part 3 FRLS regid P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar/Polycab /Anchor/ Polyline/ Orbit /AKG /Beljin /Vasavi /DEC/MODI’S.

Wiring with run of 2 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size PVC box with cover frame including cost and conveyance of all material and all labour charges etc., complete for light points in Non Residential Buildings complete for finished item of work. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/ Million/APAR (Anushakthi) Accessories Makes: Legrand(Myrius/Lyncus)/ Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ (Indoasian (Shynora)

Wiring with run of 3 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size PVC box with cover frame including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in Non Residential Buildings complete for finished item of work. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR (Anushakthi)/ Sudhakar/ Orbit / Batra Henlay Accessories Makes: Legrand(Myrius/ Lyncus)/ Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (Shynora)

Supply of 2 Module Modular type, electronic step type Fan Regulator ISI marked complete for finished item of work. Makes: Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (Shynora)

Supply and fixing of 6A 3pin wall plug socket with 6A MODULAR switch control on a common switch board with earth continuity including wire leads, connections along with all labour charges etc., complete for finished item of work. Makes: Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (Shynora)

Supply and fixing of 16A 3pin wall plug socket with 16A MODULAR switch control with suitable PVC box with earth continuity including wire leads, connections along with all labour charges etc.,complete for finished item of work. Makes: Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (Shynora)

Supply and run of 3 of 36/0.3mm (2.5 sq mm) PVC FRLS/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of complete for finished item of work. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi)/ Sudhakar/orbit/Batra Henlay

Supply and run of 3 of 54/0.3mm (4.0 sq mm) PVC FRLS/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of complete for finished item of work. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/ Million/ APAR (Anushakthi)/ Sudhakar/orbit/Batra Henlay

Supply and fixing of 20-24W, not less than 1100mm length LED batten lightwith PVC body, input voltageAC 220 - 260 Volts with PF>0.9,Surge protection: 2KV,THD<15%,with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete complete for finished item of work. a) LUMINAIRE MAKE : Phillips / GE- Venture /Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/ HPL/GM / GreenLites / Gold Medal/ Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG/ Everlight

Supply and fixing 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator. including wire connection and labour charges etc. Makes: Crompton (HS Decora/Aura) / Bajaj Regal Star / Havells Festiva / Orient Ornamental Shine /Halonix(Halo) /Polycab(Aerobliss)/G.M. (Air Wave Premium) /Goldmedal (Flora)/RJP(Aroma Super)/ Million ( Max400Deco).

Supply and transportation of and fixing of 90W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. , with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Valmont (Supernova) Greenlites(HI-Lux) / Capart(Premium) /Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Arrt (Leaf) / Rhino(GPSL06)/Orient (Fiesta Plus) /Bee-lite(Gritty) /Ecolink(Durastreet Gen-II) /Pro-Lite(GLM) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Supply and transportation of and fixing of 45WLED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. , with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj Edge) / Halonix(Lumos - Super) / Havells (Endura Series)/Valmont(Supernova) /Capart(Premium) /Greenlites(Hi-Lux) /Polycab /Keselec/ HPL(City Vision)/ Jaquar(Premium) /Eveready/ Surya (Lexon) / FortuneArrt (Leaf) / Rhino(GPSL04)/Orient(Fiest Plus)/Bee-lite(Gritty)/ Ecolink(Durastreet Gen II) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

Supply and fixing of 12 Way SPN DB with IP 43, Protection suitable for 40A, 2 Pole, 30mA RCBO as incommer and 8 no's of 6-32 A SPMCB as outgoings etc complete as per IS 8623;IS 13032;IEC61439-3 including labour charges etc complete surface. Makes: Legrand(Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS MCB make: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus)/ABB-SB200

Supply and transportation of 10 Sq mm X 2 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells /Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt/KEC Asian Cables/Orbit/Avocab /Gemscab/Batra Henlay.

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply and laying of 8 SWG Copper wire(0.1155Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/ surface/ Recess including, revitting, soldering, saddles, making connection etc as required complete for finished item of work.

Providing independent earthing by excavating a trench to a deapth of 2.1m in all soils, as per size specified in the data using 40mm dia b-Class GI pipe of 2.5mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of slat and charcoal in layers and all labour charegs etc., complete. for small quarters complete for finished item of work.