Construction of public toilet and cow catcher with gate in ADO Campus, Baliguda

Earth work in excavation of foundation in all kinds of soil including moorum, stony earth mixed with boulders (except sheet rocks and boulders requiring blasting) with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the works etc. complete as directed by the Engineer-in-charge.

Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will betaken on finished compacted section only).

C.C.( 1:4:8) in foundation and floors using 4cm (1½”) size HGCB metal with all labour,cess and T&P required for the work etc. complete in all respect.

Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and excluding GST of all materials with labour, cess and T&P etc. required for the work complete.

R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including cost, conveyance, royalties and excluding GST and cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as directed by the Engineer – in charge. (a) Column base, frustum, plinth band

(c) Column and beam

(d) Sun shade, loft and Chajja

(e) Roof Slab

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance and excluding GST of all materials with labour, cess and T&P etc. required for the work complete.

Supplying of 4 inch outer to outer nominal size dia. G.I. pipe conforming to IS:1239.1:2004 (medium) including cost, carriage etc.

Suppllying & fixing of iron beam in cow catcher with all cost of labour materials etc.

Suppllying & fixing of M.S Flat in cow catcher with all cost of labour materials etc.

Fly Ash brick masonry in cement mortar (1:6) in Plinth & Foundation work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.

Fly Ash brick masonry in cement mortar (1:6) in Super strucutre work using fly ash bricks of 23cm x 11cm x8cm size having a crushing strength of not less than 75kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similarsuch type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for thework complete in all respect in all floors.

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc. complete.

12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect.

2.5 cm thick grading concrete [1:2:2 ] on roof slab with 6 mm size chips including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

Fixing Ceramic tiles in Floors, Treads on steps & landing on 25 mm thick bed of cement mortar [1:1] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

Fixing Ceramic tiles in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete

Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint.

Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors.

Painting two coats with approved paint over the surface including cost of paint

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 5A ,25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/ Great White/HPL) Group-B L.P-3 F.P- 2 C.B.P-

Group-C L.P- 1 F.P- C.B.P-

S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .

Exhaust fan 9"/10" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent).

Supply and Fittings of 9 watt LED Bulb

Laying of 110mm nominal diameter UPVC sewer line including cost of materials.

110 mm PVC SWR Plain bend 87.5

Supplying, fitting and fixing of 500 liter capacity water storage tank along with construction of appropriate staging for fixing of the same as per specification and direction of engineer in charge.

Providing & Fixing to walls/floor the following nominal diameter pipe, fittings including cost of pipe, making good the damage, etc. 25mm dia PVC pipe in ground floor

20mm dia PVC pipe in ground floor

15mm dia PVC pipe in ground floor

Cutting holes through the brick or laterite masonary wall for taking S.C./PVC Soil waste pipe and making good the damage in ground floor and first floor

Supply, fitting and fixing of CP concealed screw down stop cock of 15mm diameter in ground floor and first floor

Supply, fitting and fixing of chromium plated brass towel rail 25mm diax450mm long complete including cost of all materials in ground floor and first floor

Supply, fitting and fixing of brass or G.M.fullway valve of following nominal diameter etc. complete including cost of all materials. 25mm dia

Supply, fitting and fixing of Pillar Cock of 15mm diameter in ground floor and first floor

Supply, fitting and fixing of C.P. screw down bib cock (tap) of 15mm diameter in ground floor and first floor

Supply, fitting and fixing of wash hand basin with hole (size 550x400mm) including fixing CP brass waste, fixing of 32mm PVC waste pipe, fixing 15mm dia CP pillar cocks, fixing 12mm dia connection pipe & water connection etc. complete including cost of all materials in ground floor and first floor as per specification and direction of engineer in charge.

Fitting and fixing of Orissa type water closet squatting pan, Size 580x440mm in CC(1:5:10)using 40mm size cbhg metal including cost of materials in ground floor and first floor as per specification and direction of engineer in charge as per specification and direction of engineer in charge.

Supply, fitting and fixing of Parryware make PVC low level 10l capacity cistern with complete fixtures, all complete in ground floor and first floor as per specification and direction of engineer in charge.

Supplying all materials, labour,T&P and fixing 600mm x 125mm plate glass shelf with brackets and guard rail complete fixed to wooden plugs with CP screw as per specification and direction of Engineer in charge.

Supplying all materials, labour, T&P and fixing mirror of 600mmx450mm size superior glass mounted on 6mm thick A.C. Sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per the specification and direction of Engineer in charge.

Supplying all materials,labour,T&P , fitting and fixing of CP soap holder of appproved quality all complete as per the specification and

Supply, fitting and fixing of following components at proper places, all complete in ground floor and first floor as per specification and direction of engineer in charge. 110mm single junction with door

110mm plain tee with door

110mm pipe clip

110mm PVC vent cowl