Construction of New Crew Lobby at Koraput under the jurisdiction of ADEN/KRPU in KK line Waltair Division.

A-Execution of items of works covered by CPWD-2023. The items of

B-Execution of items of works covered by CPWD-2023 (Supply of Steel).

C-Execution of Horticulture items of works covered by CPWD-2020. The

D-Execution of items of Electrical General works are shown in Schedule-

shown in Schedule-A.

Item- 1 Execution of items of works covered by CPWD-2023.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5

2.6 m in width as well as 10 sqm on plan)

including getting out and disposal of

excavated earth lead upto 50 m and for all

lift, as directed by Engineer-in-charge.

2.25 Filling available excavated earth (excluding cum 225 196 44100

rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20

cm in depth, consolidating each deposited

layer by ramming and watering, lead up to

50 and for all lift.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work

up to plinth level :

derived from natural sources : 4 graded

stone aggregate 20 mm nominal size

derived from natural sources)

derived from natural sources : 6 graded

stone aggregate 40 mm nominal size

derived from natural sources)

derived from natural sources : 8 graded

stone aggregate 40 mm nominal size

derived from natural sources)

Centering and shuttering including

4.3 strutting, propping etc. and removal of form

6 4.3.1 Foundations, footings, bases for columns Sqm 86.4 392.15 33881.76

4.3.2 Retaining walls, return walls, walls (any Sqm 208.8 842.5 175914

thickness) including attached pilasters,

buttresses, plinth and string courses fillets,

kerbs and steps etc.

4.3.3 Columns, piers, abutments, pillars, posts Sqm 799.57 961.3 768626.64

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

WALTAIR DIVISION-ENGINEERING/ECOR

Reinforced cement concrete work in walls

(any thickness), including attached

pilasters, buttresses, plinth and string

courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. above

plinth level up to floor five level, excluding

cost of centering, shuttering, finishing and

reinforcement :

III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

5.3 Reinforced cement concrete work in beams, cum 61.94 11505.5 712650.67

suspended floors, roofs having slope up to

15 degree landings, balconies, shelves,

chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above

plinth level up to floor five level, excluding

the cost of centering, shuttering, finishing

and reinforcement with 1:1.5:3 (1 cement :

1.5 coarse sand(zone-III) derived from

natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural

6.0 MASONRY WORK

6.1S General

Brick work with common burnt clay F.P.S.

6.1 (non modular) bricks of class designation

7.5 in foundation and plinth in:

Brick work with common burnt clay F.P.S.

(non modular) bricks of class designation

7.5 in superstructure above plinth level up

to floor V level in all shapes and sizes in :

8.0 CLADDING WORK

8.20S STONE WORK DRY CLADDING

8.31 Providing and fixing Ist quality ceramic Sqm 70.8 1267.95 89770.86

glazed wall tiles conforming to IS: 15622

(thickness to be specified by the

manufacturer), of approved make, in all

colours, shades except burgundy, bottle

green, black of any size as approved by

14 Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in

white cement mixed with pigment of

matching shade complete.

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing wood work in frames of doors,

windows, clerestory windows and other

frames, wrought framed and fixed in

9.1 position with hold fast lugs or with dash

fasteners of required dia & length (hold fast

lugs or dash fastener shall be paid for

WALTAIR DIVISION-ENGINEERING/ECOR

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)

decorative type, core of block board

construction with frame of 1st class hard

wood and well matched teak 3 ply

veneering with vertical grains or cross

bands and face veneers on both faces of

9.20.1 35 mm thick including ISI marked Stainless Sqm 8 3473.85 27790.8

Steel butt hinges with necessary screws

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing aluminium sliding door

bolts, ISI marked anodised (anodic coating

9.96 not less than grade AC 10 as per IS : 1868),

transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts,

ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or

shade, with necessary screws etc. complete

Providing and fixing aluminium hanging

floor door stopper, ISI marked, anodised

(anodic coating not less than grade AC 10

as per IS : 1868) transparent or dyed to

required colour and shade, with necessary

screws etc. complete.

9.105S GYPSUM BOARD PARTITIONS

9.141 Providing and fixing PVC Door Frame of size Metre 4 573.45 2293.8

50x47 mm with a wall thickness of 5 mm (

+/- 0.2 mm), made out of single piece

extruded PVC profile, with mitred cut joints

and joint with 2 nos of PVC bracket of size

190 mm x 100 mm long arms of cross

section size 35 x 15 mm & self driven self

taping screws, the vertical door profiles to

be reinforced with 40x20 mm M.S.

rectangular tube of 0.8 mm , including

providing EPDM rubber gasket weather seal

throughout the frame, including jointing 5

mm PVC frame strip with PVC solvent

cement on the back of the profile. The door

frame to be fixed to the wall using 8 x100

mm long anchor fasteners complete, all as

per manufacturer's specification and

direction of Engineer -in- charge.

WALTAIR DIVISION-ENGINEERING/ECOR

35 mm thick factory made Solid panel PVC

Door shutter, made out of single piece

extruded solid PVC profiles, 5 mm ( +/- 0.2

mm) thick, having styles & rails (except

lock rail) of size 95 mm x 35 mm x 5 mm,

out of which 75 mm shall be flat and 20 mm

shall be tapered (on both side), having one

side thickness of 15 mm integrally extruded

on the hinge side of the profile for better

screw holding power, including reinforcing

with MS tube of size 40 mm X 20 mm x 1

mm, joints of styles & rails to be mitered cut

& joint with the help of PVC solvent cement,

self driven self tapping screws & M.S.

9.142 rectangular pipes bracket of size 190 mm X

100 mm of cross section size 35 mm x 17

mm x 1 mm at each corner. Single piece

extruded 5 mm thick solid PVC Lock rail of

size 115 mm x 35 mm, out of which 75 mm

to be flat and 20 mm to be tapered at both

ends, having 15 mm solid core in middle of

rail section integrally extruded, fixing the

styles & rails with the help of solvent and

self driven self tapping screws of 125 mm x

11 mm, including providing 5 mm Single

piece solid PVC extruded sheet inserted in

the door as panel, all complete as per

manufacturer's specification and direction

of Engineer-in-charge.

22 9.142.2 Decorative finish (wood grained finish) Sqm 4 4713.05 18852.2

Providing and fixing factory made uPVC

glazed/wire mesh windows/ doors

comprising of lead free uPVC multi-

chambered frame, sash and mullion/coupler

(where ever required) extruded profiles

having minimum wall thickness of 1.70 mm

for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to

EN: 12608 in any shape, colour and design

duly reinforced with galvanized mild steel

section made of required shape & size as

per CPWD Specification, uPVC extruded

glazing beads, interlocks and Inline sash

adaptor (where ever required) of

appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of

minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6

grade sleeve for fixing frame to finished

wall as per IS 1367 : Part 1 to 14, plastic

9.147 packers, plastic caps and necessary

stainless steel screws etc. Profile of frame,

sash & mullion (if required) shall be mitred

cut and fusion welded/mechanically jointed

duly sealed at all corners, including drilling

of holes for fixing hardware and drainage of

water etc. After fixing frame the gap

between frame and adjacent finished wall

shall be filled with weather proof silicon

sealant over backer rod of approved size

and quality, all complete as per approved

drawing conforming to CPWD specification

& direction of Engineer-in-Charge. Section

of steel reinforcement and cross sections of

uPVC profiles to be as per design approved

by Engineer-in-Charge. Wire mesh / Glazing

of plain/ toughened/ laminated/ double

glass unit with / without high performance

coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be

paid separately.

WALTAIR DIVISION-ENGINEERING/ECOR

Three track three panels sliding window

with two glazed & one wire mesh panels

with Aluminium channel for roller track,

wool pile, nylon rollers with SS 304 body.

above) x (40 mm & above) & both glazed

and fly screen sash (25 mm & above) x (50

mm & above) with zinc alloy (zamak)

powder coated touch locks with hook.

(Height upto 1.2 metre).

10.0 STEEL WORK

10.1S General

10.2 Structural steel work riveted, bolted or Kg 1200 133.7 160440

welded in built up sections, trusses and

24 framed work, including cutting, hoisting,

fixing in position and applying a priming

coat of approved steel primer all complete.

Steel work welded in built up sections/

framed work, including cutting, hoisting,

10.25 fixing in position and applying a priming

coat of approved steel primer using

structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, Kg 975 172.6 168285

railings, brackets, gates and similar works

11.0 FLOORING

11.37S CERAMIC GLAZED TILES

11.38 Providing and laying Ceramic glazed floor Sqm 398.88 1315.3 524646.86

tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st

quality conforming to IS : 15622, of

approved make, in all colours, shades,

except White, Ivory, Grey, Fume Red

Brown, laid on 20 mm thick bed of cement

mortar 1:4 (1 Cement : 4 Coarse sand),

jointing with grey cement slurry @ 3.3 kg/

sq.m including pointing the joints with white

cement and matching pigments etc.,

11.39 Providing and laying rectified Glazed Sqm 44.16 1330 58732.8

Ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the

manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in colours

27 White, Ivory, Grey, Fume Red Brown, laid

on 20 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and

matching pigments etc., complete.

12.0 ROOFING

12.37S RAIN WATER SPOUT AND PIPE

Providing and fixing on wall face

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes.

Providing and fixing unplasticised -PVC pipe

clips of approved design to unplasticised -

PVC rain water pipes by means of 50x50x50

mm hard wood plugs, screwed with M.S.

screws of required length, including cutting

brick work and fixing in cement mortar 1:4

(1 cement : 4 coarse sand) and making

good the wall etc. complete.

WALTAIR DIVISION-ENGINEERING/ECOR

12.50 Providing and fixing precoated galvanised Sqm 75 738.65 55398.75

iron profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-

charge) of total coated thickness 0.50 mm

(base metal of minimum 0.45 mm thickness

with total coating thickness of 0.05 mm)

with zinc coating 120 grams per sqm as per

IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the

sheet and polyester top coat 15-18

microns. Sheet should have protective

guard film of 25 microns minimum to avoid

scratches during transportation and should

be supplied in single length upto 12 metre

or as desired by Engineer-in-charge. The

sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with

EPDM seal, complete upto any pitch in

horizontal/ vertical or curved surfaces,

excluding the cost of purlins, rafters and

trusses and including cutting to size and

shape wherever required.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.3 20 mm cement plaster of mix :

13.4S CEMENT PLASTER (IN COARSE SAND)

13.6 20 mm cement plaster of mix :

13.20S PEBBLE DASH PLASTER

13.26 Providing and applying plaster of paris Sqm 951.12 262.7 249859.22

putty of 2 mm thickness over plastered

surface to prepare the surface even and

smooth complete.

13.37S INTERIOR FINISHING

Colour washing such as green, blue or buff

to give an even shade :

13.39.1 New work (two or more coats) with a base Sqm 624 53.3 33259.2

coat of white washing with lime

13.44S EXTERIOR FINISHING

Finishing walls with Premium Acrylic Smooth

13.47 exterior paint with Silicone additives of

required shade:

13.47.1 New work (Two or more coats applied @ Sqm 221.76 171.1 37943.14

1.43 ltr/10 sqm over and including priming

coat of exterior primer applied @ 0.90

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Distempering with 1st quality acrylic

distemper, having VOC (Volatile Organic

Compound ) content less than 50 grams/

13.81 litre, of approved brand and manufacture,

including applying additional coats

wherever required, to achieve even shade

Applying priming coats with primer of

approved brand and manufacture, having

low VOC (Volatile Organic Compound )

WALTAIR DIVISION-ENGINEERING/ECOR

13.85.3 With water thinnable cement primer on wall Sqm 828.93 73.95 61299.37

39 surface having VOC content less than 50

17.0 SANITARY INSTALLATIONS

17.1S General

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush

17.1 pipe, with manually controlled device

(handle lever) conforming to IS : 7231,with

all fittings and fixtures complete, including

cutting and making good the walls and

floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. Each 2 6767.4 13534.8

40 pan of size 580x440 mm with integral type

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including

17.2 flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with

all fittings and fixtures complete, including

cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic Each 2 6515.55 13031.1

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.7.4 White Vitreous China Flat back wash basin Each 4 1879.2 7516.8

42 size 550x 400 mm with single 15 mm C.P.

brass pillar tap

Providing and fixing P.V.C. waste pipe for

17.28 sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

17.32 and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing :

17.71 Providing and fixing PTMT liquid soap Each 4 168.35 673.4

container 109 mm wide, 125 mm high and

112 mm distance from wall of standard

shape with bracket of the same materials

with snap fittings of approved quality and

colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail

complete with brackets fixed to wooden

17.73 cleats with CP brass screws with concealed

fittings arrangement of approved quality

17.73.2 600 mm long towel rail with total length of Each 4 708.95 2835.8

46 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

WALTAIR DIVISION-ENGINEERING/ECOR

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings and fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

18.8 pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of Engineer

in Charge. Concealed work, including

cutting chases and making good the walls

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply

including all CPVC plain & brass threaded

18.9 fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints

complete as per direction of Engineer in

Charge. External work

C.I. SLUICE VALVES/ FIRE HYDRANTS &

18.48 Providing and placing on terrace (at all floor Per Litre 4000 11 44000

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable

50 locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but

without fittings and the base support for

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass long nose

bib cock of approved quality conforming to

IS standards and weighing not less than 810

Providing and fixing C.P. brass angle valve

18.53 for basin mixer and geyser points of

approved quality conforming to IS:8931

18.54S PTMT FITTINGS

Providing and fixing PTMT grating of

approved quality and colour.

18.58.1 Circular type

Schedule B-Execution of items of works covered by CPWD-2023 (Supply of Steel). The items of work

details are shown in Schedule-B.

Item- 1 Execution of items of works covered by CPWD-2023 (Supply of Steel).

S No. Item No Description of Item Unit Qty Rate Amount

5.0 REINFORCEMENT CEMENT CONCRETE

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all complete

upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Kg 3200 107.85 345120

Fe-500D or more.

WALTAIR DIVISION-ENGINEERING/ECOR

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all complete

above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 8450 107.85 911332.5

Fe-500D or more.

Schedule C-Execution of Horticulture items of works covered by CPWD-2020. The items of work

details are shown in Schedule-C.

Item- 1 Execution of Horticulture items of works covered by CPWD-2020.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 HORTICUTURE AND LANDSCAPING

2.2 Supplying and stacking of good earth at site cum 80 515.6 41248

including royalty and carriage upto 5 km

lead complete (earth measured in stacks

will be reduced by 20% for payment).

Supplying and stacking at site dump manure

f r o m approved source, including carriage

2.4 upto 5 km lead complete (manure

measured in stacks will be reduced by 8%

2.4.1 Screened through sieve of I.S. designation cum 30 254.15 7624.5

2.8 Spreading of sludge, dump manure and/or cum 110 52.35 5758.5

good earth in required thickness as per

3 direction of officer-in-charge (cost of

sludge, dump manure and/ or good earth to

be paid separately).

2.9 Mixing earth and sludge or manure in the cum 130 36.55 4751.5

4 required proportion specified or directed by

the Officer-in-charge

3.0 FOLIAGE AND SHADE LOVING PLANTS

3.28 Providing and displaying of Croton baby Each 250 41 10250

golden variety having ht.30 cm and above,

well developed with full of fresh and

healthy leaves in 20 cm size of Earthen

pot/Plastic pot & as per direction of the

officer-in-charge.

3.52 Providing and displaying of Dracaena rosea Each 20 45.1 902

having ht. 30 cm & above with 8 to10

6 leaves, well developed, fresh and healthy in

20 cm size of Earthen pot/Plastic pot & as

per direction of the officer-in-charge.

4.0 SEASONAL PLANTS

4.1S Winter Seasonal plants

4.45 Providing and Displaying Ornamental Kale Each 20 54.35 1087

Hybrid variety in full bloom with fresh &

healthy foliage well developed in 25 cm

Earthen Pot or in 20 cm Earthen Pot/Plastic

Pot and as per direction of the officer-in-

4.90S ROSE PLANTS

4.90 Bush Rose in different colour 2 to 3 healthy Each 20 25.65 513

branch 30 cm and above ht. well developed

8 with 8 or more flowers / flower buds in 20

cm Earthen pot /Plastic pot as per direction

of the officer-in-charge.

5.0 ORNAMENTAL PLANTS

5.16 Providing and Displaying Cyprus Golden 30 Each 50 379.25 18962.5

to 45 cm ht. well developed good Golden

9 colour foliage, Conial Shape in 25 cm

Earthen Pots as per direction of the officer-

7.0 TREE PLANTS

WALTAIR DIVISION-ENGINEERING/ECOR

7.5 Providing and stacking of Azadirachta indica Each 5 65 325

( Neem ) of height 120-130cm in big

polybag of size 25 cm as per direction of

the officer-in-charge.

7.19 Providing and stacking of Cassia nodosa of Each 10 65 650

height 120-150 cm. in big poly bags of size

25 cm as per direction of the officer-in-

7.39 Providing and stacking of Fishtail palm of ht. Each 50 200 10000

150-180 cm bottom girth 15- 20 cm well

developed in big poly bags of size 25 cm as

per direction of the officer-in-charge.

7.53 Providing and stacking of Mangifera indica Each 20 55 1100

(Mango-grafted ) of height 60-75 cm. in big

poly bag of size 25 cm as per direction of

the officer-in-charge.

7.57 Providing and stacking of Millingtonia Each 30 70 2100

hortensis of height 150-165 cm. in big poly

bag of size 25 cm as per direction of the

officer-in-charge.

Schedule D-Execution of items of Electrical General works are shown in Schedule-D. Note: Defective

Schedule supply items (Electrical) should be attended for rectification and/or replacement during warranty

period for various supply items as per their explanatory notes.

Item- 1 Execution of items of Electrical General works.

S No. Item No Description of Item Unit Qty Rate Amount

1 1 Supply, erection, testing and commissioning Numbers 20.00 201.68 4033.60

of 20W 1150mm LED batten fitting. The

price also covers the cost of Supply,

erection, testing and commissioning of 20W

1150mm LED batten fitting. Price includes

necessary wiring from ceiling rose to light to

commissioning of 20W led batten fitting in

all respect.The price shall cover the cost of

all materials required for the above work

including labour charges.

2 2 Supply, erection, testing and commissioning Numbers 8.00 1750.39 14003.12

of 36W, 2'X2' recess mounting Indoor LED

fitting, IP-20, 50000 burning hours, PF=

>/=0.90, Beam angle: >/=120 degree,

Color=6000K, 120 lumens/w (minimum),

protection from short circuit, over load,

over voltage and surges of reputed make:

Philips, Bajaj, CG, Eveready, Wipro, Jaquar

with a minimum warranty period of 2 years

[Price includes supply & installation etc. of

fittings on ceiling with required hardware

and fasteners and making electrical

connection to make the light functional but

except point wiring]. The price also covers

the cost of supply, erection, testing and

commissioning of 36W, 2'X2' recess

mounting Indoor LED fitting, IP-20, PF=

>/=0.90, Beam angle: >/=120degree, Color

4500-6000K, 120lumens/w (minimum) of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] The

price shall cover the cost of all materials

required for the above work including

labour charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

3 3 Supply, erection, testing and commissioning Numbers 24.00 1305.84 31340.16

of 18W, 1'X1' recess mounting Indoor LED

fitting, IP-20, 50000 burning hours, PF=

>/=0.90, Beam angle: >/=120 degree,

Color=6000K, 100lumens/w (minimum),

protection from short circuit, over load,

over voltage and surges of reputed make:

Philips, Bajaj, CG, Eveready, Wipro, Jaquar

with a minimum warranty period of 2 years

[Price includes supply & installation etc. of

fittings on ceiling with required hardware

and fasteners and making electrical

connection to make the light functional but

except point wiring]. The price also covers

the cost of supply, erection, testing and

commissioning of 18W, 1'X1' recess

mounting Indoor LED fitting, IP-20, PF=

>/=0.90, Beam angle: >/=120degree, Color

4500-6000K, 100lumens/w (minimum) of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] The

price shall cover the cost of all materials

required for the above work including

labour charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

4 4 Supply, erection, testing and commissioning Numbers 4.00 626.09 2504.36

of 12W round recess mounting Indoor LED

fitting complete of 100 lumens/w for 6000K,

IP-20, 50000 burning hours, beam

angle>/=120, PF >/=0.90, protection from

short circuit, over load, over voltage and

surges of reputed make: Philips, Bajaj, CG,

Eveready, Wipro and Jaquar with a

minimum warranty period of 2 years [Price

includes supply & installation etc. of fittings

on ceiling with required hardware and

fasteners and making electrical connection

to make the light functional but except

point wiring]. The price also covers the cost

of supply, erection, testing and

commissioning of 12W round recess

mounting Indoor LED fitting complete of

100lumens/w for 4500-6000K, IP-20, 50000

burning hours, beam angle >/=120, PF

>/=0.90, protection from short circuit, over

load, over voltage and surges of reputed

make: Philips, Bajaj, CG, Eveready, Wipro

and Jaquar with a minimum warranty period

of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring]The

price shall cover the cost of all materials

required for the above work including

labour charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

5 5 Erection, testing and commissioning of Numbers 25.00 68.68 1717.00

BLDC Ceiling fan 1200mm sweep with

regulator (remote controller). The price

shall cover the cost of Erection, testing and

commissioning of BLDC Ceiling fan 1200mm

sweep, 5-Star. Erection price also covers

supply of required length down rod as per

site requirement, if warranted. Price

includes necessary wiring from ceiling rose

to fan to commission the fan in all respect.

The price shall cover the cost of all

materials required for the above work

including labour charges.

Commissioning of Metal Bulkhead Fitting

10W, normal white similar to Jaquar Model

No. ILO-BLK-LBLK03X010XN for corridor

lighting as per approval of Railways. The

price also covers the cost of supply,

Erection, Testing and Commissioning of

Metal Bulk Head Fitting 10W, normal white

similar to Jaquar Model No. ILO-BLK-

LBLK03X010XN for corridor lighting of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] as

per approval of Railways. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

Commissioning of Metal Bulkhead Fitting

10W, normal white similar to Jaquar Model

No. ILO-BLK-LBLK02X010XN for Toilet,

Bathroom, Dressing Room, Washing Area

Corridor lighting as per approval of

Railways. The price also covers the cost of

supply, Erection, Testing and

Commissioning of Metal Bulk Head Fitting

10W, normal white similar to Jaquar Model

No. ILO-BLK-LBLK02X010XN for Toilet,

Bathroom, Washing Area Corridor lighting of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] as

per approval of Railways. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

8 8 erection, testing and commissioning of Numbers 4.00 68.68 274.72

300mm exhaust fan for bathrooms etc. The

price also covers the cost of Erection,

testing and commissioning of 300mm

exhaust fan. Price includes necessary wiring

from ceiling rose to fan point and

commissioning 300mm exhaust fan in all

respect. The price shall cover the cost of all

materials required for the above work

including labour charges.

WALTAIR DIVISION-ENGINEERING/ECOR

Commissioning of 2 Light Opal Globe Glass

with Nickel Finish Wall Lamp with E27 LED

7W x 2 lamps similar to Jaquar Model No.

DWL-NKL-WLBPGG002E27 for lighting of

reception concourse area, dining halls, hand

wash area as per approval of Railways. The

price also covers the cost of Supply,

Erection, Testing and Commissioning of 2

Light Opal Globe Glass with Nickel Finish

Wall Lamp with E27 LED 7W x 2 lamps

similar to Model No. DWL-NKL-

WLBPGG002E27 for lighting of reception &

its lobby area, dining halls, concourse area,

yoga room, recreation room of reputed

make: Philips, Bajaj, CG, Eveready, Wipro,

Jaquar with a minimum warranty period of 2

years [Price includes supply & installation

etc. of fittings on ceiling with required

hardware and fasteners and making

electrical connection to make the light

functional but except point wiring] as per

approval of Railways. The price shall cover

the cost of all materials required for the

above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

10 10 Supply & fixing of 3-line track 1 Meter Black Numbers 6.00 781.12 4686.72

similar to Jaquar Model No. ACI-BLK-

LTRK3L1MTRBL for fixing of track lights with

connectors. The price also covers the cost

of Supply & fixing of 3 line track 1 Meter

Black similar to Jaquar Model No. ACI-BLK-

LTRK3L1MTRBL for fixing of track lights with

connectors of reputed make: Philips, Bajaj,

CG, Eveready, Wipro, Jaquar with a

minimum warranty period of 2 years [Price

includes supply & installation etc. of fittings

on ceiling with required hardware and

fasteners and making electrical connection

to make the light functional but except

point wiring]. The price shall cover the cost

of all materials required for the above work

including labour charges. Before supply of

materials, contractor has to take approval

from Sr. DEE(G)/WAT or his authorized

11 11 Supply & fixing of 3-line Track Connector L Numbers 18.00 247.48 4454.64

Shape Black similar to Jaquar Model No.ACI-

BLK-LTRCBL3LLSHP for connecting track

and track light. The price also covers the

cost of Supply & fixing of 3 line Track

Connector L Shape Black similar to Jaquar

Model No.ACI-BLK-LTRCBL3LLSHP for

connecting track and track light of reputed

make: Philips, Bajaj, CG, Eveready, Wipro,

Jaquar with a minimum warranty period of 2

years [Price includes supply & installation

etc. of fittings on ceiling with required

hardware and fasteners and making

electrical connection to make the light

functional but except point wiring]. The

price shall cover the cost of all materials

required for the above work including

labour charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

Commissioning of Track Light Black Finish

10W warm white similar to Jaquar Model No.

IRL-BLK-LTRLB1R010XW for lighting of

Concourse Area etc. as per approval of

Railways. The price also covers the cost of

Supply, Erection, Testing and

Commissioning of Track Light Black Finish

10W warm white similar to Jaquar Model No.

IRL-BLK-LTRLB1R010XW for lighting of

Concourse Area etc. of reputed make:

Philips, Bajaj, CG, Eveready, Wipro, Jaquar

with a minimum warranty period of 2 years

[Price includes supply & installation etc. of

fittings on ceiling with required hardware

and fasteners and making electrical

connection to make the light functional but

except point wiring] as per approval of

Railways. The price shall cover the cost of

all materials required for the above work

including labour charges. Before supply of

materials, contractor has to take approval

from Sr.bDEE(G)/WAT or his authorized

Commissioning of Orelli Slim 24° Round, 7W

warm white magnetic light similar to Jaquar

Model No. IRL-BLK-LORLS24R07XW for

lighting in concourse area etc. as per

approval of Railways. The price also covers

the cost of Supply, Erection, Testing and

Commissioning of Orelli Slim 24° Round, 7W

warm white magnetic light similar to Jaquar

Model No. IRL-BLK-LORLS24R07XW for

lighting in concourse area etc. of reputed

make: Philips, Bajaj, CG, Eveready, Wipro,

Jaquar with a minimum warranty period of 2

years [Price includes supply & installation

etc. of fittings on ceiling with required

hardware and fasteners and making

electrical connection to make the light

functional but except point wiring] as per

approval of Railways. The price shall cover

the cost of all materials required for the

above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

14 14 Erection, testing and commissioning of 2- Numbers 8.00 1125.91 9007.28

ton split AC unit, 5-Star, Inverter type. The

price also covers the cost of erection,

testing and commissioning of hot and cold

2.0-ton split AC unit, 5-Star, Inverter type.

The price shall cover the cost of all

materials required for the above work

including labour charges.

15 15 erection, testing and commissioning of hot Numbers 3.00 817.78 2453.34

and cold 1.5 ton split AC unit, 5-Star,

Inverter type. The price also covers the cost

of erection, testing and commissioning of

hot and cold 1.5 ton split AC unit, 5-Star,

Inverter type. The price shall cover the cost

of all materials required for the above work

including labour charges.

WALTAIR DIVISION-ENGINEERING/ECOR

16 16 PVC concealed wiring of light/fan/call bell Point 126.00 646.02 81398.52

point with 1.5 sq.mm copper wire (Modular

Type). Supply of materials, testing &

commissioning with single core FRLS PVC

insulated multi stranded copper conductor

of size 1.5 sq. mm 1100V grade confirming

to IS 694/1990 each for phase & neutral and

1.0 Sq.mm FRLS PVC insulated copper wire

for earth continuity conductor. The rate

includes concealed wiring of light/Ceiling

fan/Exhaust Fan/Air circulator in any type of

wall complete with supply of materials,

testing & commissioning with single core

FRLS PVC insulated multi stranded copper

conductor of size 1.5 sq. mm (1100V grade)

each for phase & neutral and 1.0 Sq.mm

FRLS PVC insulated copper wire for earth

continuity conductor drawn inside suitable

size of PVC pipe of 2mm thick. The wiring

shall be in Loop method where the

phase/Live wire shall be looped at Switch

and Neutral only. No joints shall be allowed.

In case of angular lamp holder, it should be

fixed properly on 4"x4" size GI box

concealed in the wall. In case of FL light

point and fan point, connection is to be

terminated in a Poly carbonate three

terminal ceiling rose fixed on top of the

suitable size GI box fixed inside the wall /

ceiling. The control shall be of 6 amps 250V

grade modular type switch shall be

supplied and fixed by contractor on suitable

size of GI flush box to accommodate

number of switches in that sub circuit and

as decided by the site in-charge with

modular cover plate. The cost includes

fixing of the board with required material

and fasteners etc. on the wall. The location

of the board shall be decided by the site in

charge. The number of switches in the

Switch board will depend on number of

points in that sub circuit or as decided by

the site in-charge. The cost of wiring point

includes supply of Fasteners, PVC Sleeves,

Elbow, Tee of appropriate size of PVC

conduit pipe, flush box, cover other items

required for completion of work with

contractor manpower and material and as

directed by site in charge. The cost also

includes connection of wires on both sides.

The price also covers groove cutting in the

wall and makes it the original position

cement plastering with contractor's labour,

materials and tools as directives of

engineer in-charge at site. Before supply of

material the make and specifications shall

be as per Annexure.

WALTAIR DIVISION-ENGINEERING/ECOR

17 17 PVC concealed wiring of 6A socket point Point 20.00 1082.01 21640.20

with 2.5 sq.mm copper wire (Modular Type)

for separate point. The rate includes

concealed wiring of 6A capacity socket

point in any type of wall, complete with

supply of materials, testing &

commissioning with single core FRLS PVC

insulated multi stranded copper conductor

of size 2.5 sq. mm 1100V grade confirming

to IS: 694/1990 each for phase & neutral

and 1.0 Sq.mm FRLS PVC insulated copper

wire for earth continuity conductor drawn

inside suitable size PVC conduit pipe of

suitable size of 2mm thick. The circuit shall

be drawn from sub service main/nearest

Switch board for phase and neutral and

shall be terminated on the socket. The

concealed wiring shall be in loop in loop out

method. No joints shall be allowed. The

control switch and socket shall be of 6

amps capacity 5 pin socket modular type

fitted on the separate metal flush box with

modular cover plate. The cost includes

fixing of the board with required material

and fasteners etc. on the wall. The location

of the board shall be decided by the site in

charge. The cost of wiring point includes

supply of Fasteners, PVC Sleeves, Elbow,

Tee of appropriate size of PVC conduit pipe,

and other items required for completion of

work with contractor manpower and

material and as directed by site in charge.

The cost also includes connection of wires

on both sides. The cost also includes, Fixing

of socket, switch and making connection

with three wires (Phase, Neutral & Earth).

The price also covers groove cutting in the

wall and makes it in the original position

cement plastering as directives of Engineer-

In-Charge at site. Before supply of material

the make and specifications shall be as per

WALTAIR DIVISION-ENGINEERING/ECOR

18 18 PVC concealed wiring of 16A socket point Point 10.00 1424.43 14244.30

with 4 sq.mm copper wire (Modular Type).

The rate includes concealed wiring of 6A

capacity socket point in any type of wall,

complete with supply of materials, testing &

commissioning with single core FRLS PVC

insulated multi stranded copper conductor

of size 2.5 sq. mm 1100V grade confirming

to IS: 694/1990 each for phase & neutral

and 1.0 Sq.mm FRLS PVC insulated copper

wire for earth continuity conductor drawn

inside suitable size PVC conduit pipe of

suitable size of 2mm thick. The circuit shall

be drawn from sub service main/nearest

Switch board for phase and neutral and

shall be terminated on the socket. The

concealed wiring shall be in loop in loop out

method. No joints shall be allowed. The

control switch and socket shall be of 6

amps capacity 5 pin socket modular type

fitted on the separate metal flush box with

modular cover plate. The cost includes

fixing of the board with required material

and fasteners etc. on the wall. The location

of the board shall be decided by the site in

charge. The cost of wiring point includes

supply of Fasteners, PVC Sleeves, Elbow,

Tee of appropriate size of PVC conduit pipe,

and other items required for completion of

work with contractor manpower and

material and as directed by site in charge.

The cost also includes connection of wires

on both sides. The cost also includes, Fixing

of socket, switch and making connection

with three wires (Phase, Neutral & Earth).

The price also covers groove cutting in the

wall and makes it in the original position

cement plastering as directives of Engineer-

In-Charge at site. Before supply of material

the make and specifications shall be as per

19 19 PVC concealed sub-sub main wiring with Running 200.00 117.46 23492.00

4Sq.mm copper wire (Sub-main wiring with Metre

Phase, Neutral & Earth). The rate includes

PVC Pipe wiring of concealed wiring from

distribution board to the sub distribution

board or for AC point in any type of wall,

complete with supply of materials, testing &

commissioning with single core PVC FRLS

insulated multi stranded copper conductor

of size 4 sq mm 1100V grade confirming to

IS: 694/19902 wire. The copper conductor

shall draw inside of suitable size of PVC

Pipe. 2.5 sq mm copper wire is to be drawn

as earth wire. 1 meter length consists of

two wires of 4 sq mm and one wire of

2.5sqmm (Phase, Neutral Earth). The price

also covers groove cutting in the wall and

makes it in the original position cement

plastering with contractor's labour,

materials and tools as directives of

Engineer-In-Charge at site. Before supply of

material the make and specifications shall

be as per Annexure.

WALTAIR DIVISION-ENGINEERING/ECOR

20 20 PVC concealed wiring with 6sq.mm copper Running 50.00 155.28 7764.00

wire (Sub-main wiring with Phase, Neutral & Metre

Earth). The rate includes PVC Pipe wiring of

sub main wiring (concealed) from

distribution board to the sub main board in

any type of wall, complete with supply of

materials, testing & commissioning with

single core PVC FRLS insulated multi

stranded copper conductor of size 6 sq.mm

1100V grade confirming to IS: 694/1990, 2

wire. The copper conductor shall drawn

inside of suitable size of PVC Pipe.

Connection is to be tapped off from the

Distribution board. 2.5 sq mm copper wire

is to be drawn as earth wire. 1 meter length

consists of two wires of 6 sq.mm and one

wire of 2.5sqmm (Phase, Neutral Earth).

The price also covers groove cutting in the

wall and makes it in the original position

cement plastering with contractor's labour,

materials and tools as directives of

engineer incharge at site. Before supply of

material the make and specifications shall

be as per Annexure.

21 21 PVC concealed sub-sub main wiring with Running 100.00 108.39 10839.00

2.5Sq.mm copper wire (Sub-main wiring Metre

with Phase, Neutral & Earth). The rate

includes PVC Pipe wiring of concealed

wiring from distribution board to the sub

distribution board or for AC point in any

type of wall, complete with supply of

materials, testing & commissioning with

single core PVC FRLS insulated multi

stranded copper conductor of size 2.5 sq

mm 1100V grade confirming to IS:

694/19902 wire. The copper conductor shall

drawn inside of suitable size of PVC Pipe.

1.5 sq mm copper wire is to be drawn as

earth wire. 1 meter length consists of two

wires of 2.5 sqmm and one wire of

1.5sqmm (Phase, Neutral Earth). The price

also covers groove cutting in the wall and

makes it in the original position cement

plastering with contractor's labour,

materials and tools as directives of

Engineer-In-Charge at site. Before supply of

material the make and specifications shall

be as per Annexure.

22 22 Provision for modular wiring on board 6A Numbers 30.00 505.30 15159.00

plug point with 2.5 sq.mm. copper wire. The

price shall covers the cost of Provision for

modular wiring on board 6A plug point with

2.5 sq.mm. copper wire. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

23 23 Supply, fixing of modular type motor starter Numbers 11.00 970.09 10670.99

switch with socket, 25 amps including

encloser (AC Point). The price shall covers

the cost of supply, fixing, testing and

commissioning of modular type motor

starter switch (25 Amps) with socket (25

Amps) complete with all accessories & all

required materials including connection

(connection to made vide Item No.2) with

contractor's labour and tools as directed by

Engineer in charge of work. The motor

starter switch & socket are to be fix in a

suitable enclosure. The motor starter switch

& socket are to be fix separately if required

as per site conditions. Modular Motor

Starter Switch & Socket shall be of reputed

make Anchor/Havells/Legrand or of any

other make approved by Railway. The price

shall cover the cost of all materials required

for the above work including labour

charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

24 24 Supply & erection of occupancy sensor of Numbers 4.00 1842.54 7370.16

reputed make for interior lighting control

etc. The price shall cover the cost of Supply

& erection of occupancy sensor of reputed

make approved by Railway for interior

lighting control etc., The price shall cover

the cost of all materials required for the

above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

25 25 Master controller switch 20A modular Numbers 7.00 345.03 2415.21

outside of room or at specified location for

switch on/off of supply. The price shall

cover the cost of Supply, erection &testing

of Master controller switch 20A modular

outside of room or at specified location for

switch on/off of supply. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

26 26 Supply and fixing of PVC circular box/RJ box Numbers 10.00 45.15 451.50

/square junction box on wall/roof/truss. The

price shall cover the cost of supply and

erection of PVC circular box/ round junction

box/ square junction box conforming to IS:

9537-3 of 1983 or GI square junction box as

and when required on the roof/wall/truss

with contractor's tools & labours. The price

shall cover the cost of all materials required

for the above work including labour

WALTAIR DIVISION-ENGINEERING/ECOR

27 27 Modular light/fan/ex fan/call bell point Point 10.00 435.67 4356.70

wiring (without supply and laying of pipe)

with (2x1.5+1x1) Sq.mm FRLS PVC

insulated flexible copper conductor 1100V

grade. The price shall cover cost of supply &

modular point wiring (without supply and

laying of pipe)with(2x 1.5) Sq.mm 1100V

grade PVC insulated flexible copper

conductor cable(for phase and neutral) and

( 1 x1) sq.mm 1100V grade PVC insulated

flexible copper conductor cable(for earth)in

t h e concealed/surface PVC conduit

pipe/casing & caping with 6A flush modular

type switch ,supply of 6A flush modular

type switch (Legrand Model No:6755 02 for

two way switch and Legrand Model No:6755

01 for one way switch similar as per

approved list)where ever required , ceiling

rose and modular type plate cover to switch

control box .The price excludes supply &

laying of PVC conduit pipe/casing & caping.

The price shall cover the cost of all

materials required for the above work

including labour charges.

28 28 Concealed/surface wiring with Running 50.00 75.05 3752.50

(2x2.5+1x1.0sqmm) FRLS copper wire Metre

1100-volt grade (without supply and laying

of pipe) on truss/roof/wall. The price shall

cover cost of supply &concealed/surface

wiring (without supply and laying of pipe)

for separate plug point 6A 250V modular

type long run with (2x2.5 )Sq.mm1100V

grade PVC insulated flexible copper

conductor cable (for phase and neutral )

and (1 x 1) sq.mm1100V grade PVC

insulated flexible copper conductor

cable(for earth)with supply of Modular

Switch 6A,250V AC, Modular Socket

6A,250V AC on 3 way module metal box

and 3way module white plate. The price

excludes supply & laying of PVC conduit

pipe/casing & caping. The price shall cover

the cost of all materials required for the

above work including labour charges.

approval from Sr. DEE(G)/WAT or his

authorized official before execution of work

29 29 Supply & laying of PVC rigid Conduit pipe Metre 50.00 68.53 3426.50

25mm outer Dia (Heavy) on truss with

proper saddles/GI clamps. The price also

covers the cost of Supply & laying of PVC

rigid Conduit pipe 25mm outer Dia (Heavy)

on truss with proper saddles/GI clamps. The

price shall cover the cost of all materials

required for the above work including

labour charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

30 30 Supply, erection, testing and commissioning Numbers 3.00 6991.15 20973.45

of 8-way Main DB Double door along with

IC-63A MCB TPN, O/G-32A SP MCB-4Nos.,

16A SP MCB-4Nos. The price also covers the

cost of Supply, erection, testing and

commissioning of 8-way Main DB Double

door along with IC-63A MCB TPN, O/G-32A

SP MCB-4Nos., 16A SP MCB-4Nos. The price

shall cover the cost of all materials required

for the above work including labour

charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

31 31 Supply, erection, testing and commissioning Numbers 5.00 2208.18 11040.90

of 8-way Sub-Main DB Double door along

with 16A to 32A MCB DP - 01No. on I/C and

6A to 16A MCB SP-04Nos on O/G. The price

also covers the cost of Supply, erection,

testing and commissioning of 8-way Sub-

Main DB Double door along with 16A to 32A

MCB DP - 01No. on I/C and 6A to 16A MCB

SP-04Nos on O/G. The price shall cover the

cost of all materials required for the above

work including labour charges. Before

supply of materials, contractor has to take

approval from Sr. DEE(G)/WAT or his

authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

32 32 Design, fabrication, Supply, erection, Numbers 1.00 167278.49 167278.49

testing and commissioning of LT panel

board, IP:54 minimum with incoming side

consisting of 1x200A MCCB 4P

(Icu=Ics=25KA), 1set of LED type indication

lamp (RYB), 3Ph Digital Voltmeter 0-500V,

3Ph Digital Ammeter 0-400A, 6Nos. MCB-6A

with multifunction meter with 200/5A CTs,

300A capacity EC grade copper busbar and

Outgoing side consisting of 160A capacity

EC grade copper busbar with 4x100A MCCB

4P (Icu=Ics=25KA) with 1No. of 63A 4-Pole

AC-1 Duty Power Contactor with Digital

Time Switch with Astronomical Function. All

MCCBs shall be thermal magnetic release

provided with spreader and rotary handle.

The panel board shall be fabricated with

2mm thick CRCA sheet steel powder coated

with siemens grey, FRP coated etc. as per

detailed specification. The panel board shall

have required provisions for future

installation of 2x100A MCCBs on outgoing

side. Cu-Al bimetallic strips are to be

provided wherever required for connecting

aluminium cables. Switchgear Make:

Legrand, ABB, Siemens, C&S and L&T. Price

also cover required concrete/brick work for

erection of panel board. The price shall

cover the cost of Design, fabrication,

Supply, erection, testing and commissioning

of LT panel board, IP:54 minimum with

incoming side consisting of 1x200A MCCB

4P (Icu=Ics=25KA), 1set of LED type

indication lamp (RYB), 3Ph Digital Voltmeter

0-500V, 3Ph Digital Ammeter 0-400A, 6Nos.

MCB-6A with multifunction meter with

200/5A CTs, 300A capacity EC grade copper

busbar and Outgoing side consisting of

160A capacity EC grade copper busbar with

4x100A MCCB 4P (Icu=Ics=25KA) with 1No.

of 63A 4-Pole AC-1 Duty Power Contactor

with Digital Time Switch with Astronomical

Function. All MCCBs shall be thermal

magnetic release provided with spreader

and rotary handle. The panel board shall be

fabricated with 2mm thick CRCA sheet steel

powder coated with siemens grey, FRP

coated etc. as per detailed specification.

The panel board shall have required

provisions for future installation of 2x100A

MCCBs on outgoing side. Cu-Al bimetallic

strips are to be provided wherever required

for connecting aluminium cables.

Switchgear Make: Legrand, ABB, Siemens,

C&S and L&T. Price also cover required

concrete/brick work for erection of panel

board. The price shall cover the cost of all

materials required for the above work

including labour charges. Before supply of

materials, contractor has to take approval

from Sr. DEE(G)/WAT or his authorized

WALTAIR DIVISION-ENGINEERING/ECOR

33 33 Single Cable Laying Along the road/Track. Metre 250.00 369.75 92437.50

The price shall cover the cost of

transporting the UG cable from stores of

work InCharge office, or other premises as

directed by work InCharge to work site&

laying of cable shall be completed with

contractors men & materials and laying

after excavation of earth in any type of soil.

The dimension of trench number of bricks,

sand bedding etc., shall be confirmed to the

CEE/ECoR/BBS drawing No. CEE/GS/Cable

Trench/01 (mod-01) or latest. Price is also

inclusive of refilling levelling and dressing

of earth to be done contractors labour, tools

and materials. The IR values of cable is to

be measured before and after laying of the

34 34 Single Cable Laying Across the road/track. Metre 20.00 631.79 12635.80

The price shall cover the cost of

transporting the UG cable from stores of

work InCharge office, or other premises as

directed by work InCharge to work site. &

laying of cable shall be completed with

contractors men & materials. The cable

laying shall be in accordance with

CEE/BBS's latest drawing No. CEE/GS/Cable

trench/01 (mod-01). Price is also inclusive

of refilling levelling and dressing of earth to

be done contractors labour, tools and

materials. The IR values of cable to be

measured before and after laying of the

35 35 Laying of Cable in open air. The unit price Metre 30.00 31.11 933.30

shall cover for fixing of the cable on

plinth/structure/ column/culvert to be done

by GI Clamp of suitable size as per site

requirement. The distance of each clamp

should not be more than 1 meter. The work

should be completed with contractors'

materials, tools & plants etc.

36 36 Cable Laying Through HDPE Pipe. The price Metre 90.00 28.72 2584.80

includes laying of cable through HDPE Pipe

to be done by the contractor and the work

shall be completed as per the direction of

Engineer in Charge of work at site. The IR

values of cables shall be tested jointly

signed by Rly representative and authorized

contractors representative prior to laying,

after laying and just before charging the

WALTAIR DIVISION-ENGINEERING/ECOR

37 37 Laying of Railway supplied UG Cable of Metre 20.00 410.42 8208.40

different size: Along the Road double Cable.

The price shall cover the cost of

transporting the UG cable from stores of

work InCharge office, or other premises as

directed by work InCharge to work site &

laying of double cable shall be completed

with contractors men & materials. Double

cable laying along the road/track after

excavation of earth in any type of soil. The

dimension of trench, number of bricks, sand

bedding etc., shall be confirming to the

CEE/ECoR/BBS latest drawing No.

CEE/GS/Cable Trench/01 (Mod-1). The cost

is also inclusive of refilling of earth,

levelling of earth to be done by contractors'

labour, tools and materials. The work is to

be completed with the contractors' labour,

tools and all required materials including

erection, testing and commissioning. Price

is also inclusive of refilling levelling and

dressing of earth to be done contractors

labour, tools and materials. The IR values of

cable to be measured before and after

laying of the cable.

38 38 Laying of Railway supplied UG Cable of Metre 10.00 1045.81 10458.10

different size: Across the Road/Track double

cable. The price shall cover the cost of

transporting the UG cable from work in-

charge office, store, other premises as

directed by work in-charge to work site &

laying of double cable across the track/hard

soil with contractors' men &material. The

double cable laying shall be in accordance

with CEE/BBS's latest drawing No. CEE/GS/

Cable trench/01 (mod-01). Price is also

inclusive of refilling levelling and dressing

of earth to be done contractors labour, tools

and materials. The work is to be completed

with the contractors' labour, tools and all

required materials including erection,

testing and commissioning. Price is also

inclusive of refilling levelling and dressing

of earth to be done contractors labour, tools

and materials. The IR values of cable to be

measured before and after laying of the

39 39 Earthing arrangement. The price shall Numbers 10.00 3391.11 33911.10

include the cost for excavation of earth pits

in any kind of soil, supply and erection of

earth cone and strip including refill with

salt, charcoal as per CEE/BBS's Drawing No.

CEE/GS/Earthing/02 dt. Dt.21/02/2006 and

connected by means of 6 SWG GI wire. The

work shall also cover the cost of materials

and labour charges for construction of sump

as shown in the aforesaid drawing and the

earth treated to obtain earth resistance of

as per Rule. Connection of earth electrode

should be made by providing clamp, nuts,

bolts and 6 SWG GI wire. The price shall

cover for supply and erection of earth pit

cover made by RCC and make it complete

in all respects as per above drawing. The

price also covers 6 SWG GI wire from earth

pit to nearest main supply point and

installation. The makes and specifications

are shown in Annexure.

WALTAIR DIVISION-ENGINEERING/ECOR

40 40 Supply & erection of cable route marker. Numbers 10.00 90.23 902.30

The price shall cover the cost of supply and

erection of cable route marker as per

sample approved by Sr. DEE(G) or his

authorized representative. Cable route

marker should be provided along straight

runs of the cables at intervals of 50m or by

site in-charge. The price shall cover the cost

of all materials required for the above work

including labour charges.

41 41 Supply, erection, testing and commissioning Numbers 1.00 28930.50 28930.50

of outdoor feeder pillar consisting of copper

bus bar 200Amp with LED type indication

lamp for RYB in incoming side in a CRCA

sheet with double door provision & locking

arrangement. The panel shall consist of I/C:

1X100A MCCB 4P 35KA with multifunction

energy meter with 100/5A CTs, outgoing:

2X63A MCB TPN 10KA, 4x32A MCB TPN

10KA. Size:800mmX 600mmX375mm

approx., sheet:1.6mm thick,

Angle:40x40x6mm, Channel:75X40x6mm).

Erection price also covers brick pedestal.

The price also covers the cost of Supply,

erection, testing and commissioning of

outdoor feeder pillar consisting of copper

bus bar 200Amp with LED type indication

lamp for RYB in incoming side in a CRCA

sheet with double door provision & locking

arrangement. The panel shall consist of I/C:

1X100A MCCB 4P 35KA with multifunction

energy meter with 100/5A CTs, outgoing:

2X63A MCB TPN 10KA, 4x32A MCB TPN

10KA. Size:800mmX 600mmX375mm

approx., sheet:1.6mm thick,

Angle:40x40x6mm, Channel:75X40x6mm).

Erection price also covers brick pedestal.

The price shall cover the cost of all

materials required for the above work

including labour charges. Before supply of

contractor has to take approval of drawing,

switchgear, components other accessories

of LT panel board from Sr. DEE/G/WAT or his

authorized official.

42 42 Supply & erection of outdoor type MS/FRP Numbers 5.00 1511.28 7556.40

loop in loop out box made of 1.6mm thick

MS sheet/FRP of size 200X150X100mm &

4way stud connector with provision of door

in front side with locking arrangement. The

price also covers the cost of Supply &

erection of outdoor type MS/FRP loop in loop

out box made of 1.6mm thick MS sheet/FRP

of size 200X150X100mm & 4way stud

connector with provision of door in front

side with locking arrangement. The price

shall cover the cost of all materials required

for the above work including labour

charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

43 43 Laying of cable along the concrete Metre 20.00 80.50 1610.00

floor/black top road by cutting floor/black

top road without G.I pipe. The price includes

laying of cable along the concrete

floor/black top road by cutting floor/black

top road to be done by the contractor and

the work shall be completed as per the

direction of Engineer in Charge of work at

site. The price shall be inclusive of charges

for laying of cable in the concrete floor by

digging the floor with contractor's labour

and tool and top up to be done with suitable

cement or black top. The work shall be

executed as per the direction of Engineer in

Charge of work at site. The IR values of

cables are to be tested prior to laying, after

laying and just before charging the cable

and the values recorded should be jointly

signed by Rly representative and authorized

contractors representative.

HDPE Pipe conforming to IS-4984:2016,

excavation of earth in any soil to a depth of

1m, laying of HDPE pipe, back filling of

earth & its leveling for drawal of flat cable

for bollard lighting etc. The price also

covers the cost of Supply of 40 mm

Diameter PE 80 HDPE Pipe, excavation of

earth in any soil to a depth of 1m, laying of

HDPE pipe, back filling of earth & its

leveling for drawal of flat cable for bollard

lighting etc. The price shall cover the cost of

Supply of HDPE Pipe as per IS: 4984-1995

(PN-4/PE-80, with minimum wall thickness

of 6.2mm) OD=40mm. The price shall cover

the cost of all materials required for the

above work including labour charges.

45 45 Supply & erection of 40 mm Diameter PN-6, Metre 10.00 205.99 2059.90

PE-80 HDPE Pipe conforming to IS-

4984:2016 and Clamps including cutting

and making good the walls etc. The price

also covers the cost of Supply & erection of

40 mm Diameter PE 80 HDPE Pipe and

Clamps including cutting and making good

the walls etc. The price shall cover the cost

of all materials required for the above work

including labour charges.

The rates are inclusive of supply and laying

of 6/8/12 SWG GI wire as per IS 12776/2002

specification and laying with the

contractors, manpower, materials, tools &

clamps etc., from earth pit to transformers,

distribution boards and all electrical

equipment's as per the site engineer's

instructions. The price shall cover the cost

of Supply and laying of 8SWG GI wire as per

relevant IS specification The work shall be

executed as per the direction of Engineer in

Charge of work at site. The price shall cover

the cost of all materials required for the

above work including labour charges.

47 47 Supply & fixing of Firefighting equipment Numbers 2.00 2529.50 5059.00

1ltr dry chemical powder cartridge type.

The price shall cover the cost of supply of

firefighting equipment such as dry chemical

powder cartridge type fire extinguisher of

ISI mark of 1kg each & fixing on the wall of

sub-station building with contractor's

WALTAIR DIVISION-ENGINEERING/ECOR

48 48 Supply & fixing of Sand bucket with sand Numbers 1.00 2186.35 2186.35

(1set consisting of 4nos. Bucket with stand).

The price shall cover the cost of Supply &

fixing of Sand bucket with sand (1set

consisting of 4nos. Bucket with stand).

50X6mm/25x5mm. The rate includes supply

& Erection of G.I flat of

50mmX6mm/25mmX6mm for connection of

Earth. The rate includes connection/re-

connection/dismantling and connection of

earth continuity of any electrical

installations/equipment's over Waltair

division of East Coast Railway as per the

instructions of Sr DEE(G)/WAT or his

authorized representative. The rate also

includes supply of all the auxiliary materials

necessary for completion of the work. The

rate also includes painting and writing of

identifiers/values wherever necessary.

50 50 Supply, erection, testing and commissioning Numbers 10.00 1965.57 19655.70

of 45W LED outdoor light fitting of reputed

make: Philips, Bajaj, CG, Eveready, Wipro,

Jaquar with a minimum warranty period of

2years [Price includes supply & installation

etc. of fittings with required hardware and

fasteners and making electrical connection

to make the light functional but except

point wiring]. The rate is also inclusive of

supply, erection, testing and commissioning

of 45W LED outdoor light fitting of reputed

make : Philips, Bajaj, CG, Eveready, Wipro,

Jaquar with a minimum warranty period of 2

years [Price includes supply & installation

etc. of fittings with required hardware and

fasteners and making electrical connection

to make the light functional but except

point wiring]. Installation at site as per site

requirement and as per instructions of site

in charge complete with contractors

material. Erection of the 45W LED outdoor

light fittings on Octagonal pole/Rail

pole/Tubular pole/Service building with

contractors labour, tools and plants etc.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

51 51 Erection, testing and commissioning of Numbers 2.00 68.68 137.36

energy efficient 3 blade, 450mm wall

mounted oscillating fan with minimum

warranty period of 1 year. Make: Atomberg,

Crompton, Havells, Usha, Orient, Bajaj.

Erection price also includes necessary

wiring from nearest 5A Plug Socket as per

site requirement. The price also covers the

cost of Erection, testing and commissioning

of energy efficient 3 blade, 450mm wall

mounted oscillating fan with minimum

warranty period of 1 year. Make: Atomberg,

Crompton, Havells, Usha, Orient, Bajaj.

Erection price also includes necessary

wiring from nearest 5A Plug Socket as per

site requirement The price shall cover the

cost of all materials required for the above

work including labour charges. Before

supply of materials, contractor has to take

approval from Sr.DEE(G)/WAT or his

authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

52 52 Supply, erection, testing and commissioning Numbers 4.00 22368.00 89472.00

of Solar Street Light System 25W LED, IP:65

or better, Power output of PV module:

>/=75Wp, LiFeP04 Battery capacity >/=

12.8V (nominal), 30 Ah, provided with 2 LED

indicators for changing in progress, deep

discharge condition, 7m height pole,

nominal bore size/thickness: 65mm/4.5mm,

battery box: battery included in the

luminaire enclosure and corrosion resistant,

with solar PV modules with efficacy

>/=75Wp at 16.4+/-0.2 V at STC, necessary

control electronics, interconnecting

wires/cables, module mounting structures

etc. to operate from dusk to dawn etc. as

per other conditions in specification similar

to model No. Havells 7. Price also include

cost of concrete foundation, erection of

lighting system with grouting bolt etc. for

commissioning of the entire system. The

price covers the cost of Supply, erection,

testing and commissioning of Solar Street

Light System 25W LED, IP:65 or better,

Power output of PV module: >/=75Wp,

LiFeP04 Battery capacity >/= 12.8V

(nominal), 30 Ah, provided with 2 LED

indicators for changing in progress, deep

discharge condition, 7m height pole,

nominal bore size/thickness: 65mm/4.5mm,

battery box: battery included in the

luminaire enclosure and corrosion resistant,

with solar PV modules with efficacy

>/=75Wp at 16.4+/-0.2 V at STC, necessary

control electronics, interconnecting

wires/cables, module mounting structures

etc. to operate from dusk to dawn etc. as

per other conditions in specification similar

to model No. Havells 7. Price also includes

cost of concrete foundation, erection of

lighting system with grouting bolt etc. for

commissioning of the entire system. The

price shall cover cost of excavation of earth

pit in any kind of soil/rock for erection of

pole with cement concrete in the ratio 1:3:6

casting of foundation including re-filling and

dressing of earth with contractor's labour,

tools including supply of cement and all

materials. Digging of pit, casting of

foundation 0.8Mx0.8Mx1M/ 1Mx1Mx2M with

stone ballast of size 40mm/20mm and

below for erection of with contractor's

cement and mortar with ratio 1:3:6 and

12mm. thick cement plastering and neat

cement finishing are also to be done for

muffing by the contractor. All the

foundations are to be cured for 21 days.

The price shall cover the cost of all

materials required for the above work

including labour charges. Price also include

cost of concrete foundation, erection of

lighting system with grouting bolt etc. for

commissioning of the entire system. Before

supply of materials, contractor has to take

approval from Sr. DEE(G)/WAT or his

authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

Commissioning of Reneva Gate Top 30W,

warm white similar to Jaquar Model No.

OGL-GRY-LGTP01X030XW for Gate Lighting

as per approval of Railways. The price also

covers the cost of Supply, Erection, Testing

and Commissioning of Reneva Gate Top

30W, warm white similar to Jaquar Model

No. OGL-GRY-LGTP01X030XW for Gate

Lighting of reputed make: Philips, Bajaj, CG,

Eveready, Wipro, Jaquar with a minimum

warranty period of 2 years [Price includes

supply & installation etc. of fittings on

ceiling with required hardware and

fasteners and making electrical connection

to make the light functional but except

point wiring] as per approval of Railways.

The price shall cover the cost of all

materials required for the above work

including labour charges. Before supply of

materials, contractor has to take approval

from Sr. DEE(G)/WAT or his authorized

Commissioning of Cone Bollard 10W, warm

white similar to Jaquar Model No. OBL-GRY-

LBLDCON010XW for pathway lighting as per

approval of Railways. The price also covers

the cost of Supply, Erection, Testing and

Commissioning of Cone Bollard 10W, warm

white similar to Jaquar Model No. OBL-GRY-

LBLDCON010XW for pathway lighting of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] as

per approval of Railways. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

55 55 Supply, Installation and commissioning of Square 50.00 623.13 31156.50

3D letter signage made out of aluminum Foot

composite panel base mild steel 25mm x

25 mm x 18 gauge antirust mild steel

square tube frame cover with 3 mm thick (

0.25 mm aluminum 2.5 mm pure poly

vinylidene fluoride & 0.25 aluminum) base

as per design & colour writing massage (as

directed by Railways) in Tri language made

out of 3 mm thick imported acrylic sheet

2/3 raising 3D letters back side 2 mm clear

acrylic sheet casing capping as per the

design & colour box type acrylic letters

inside fitted with hi-bright water proof & fire

proof four cluster LEDs module (Each LED

SAMSUNG/NICHIA/OSRAM/KREE with all

provisions for setting and arrangement.

N.B-Text massage, Design of letter and

colour of the board shall be approved by

Railways. The price also covers the cost of

Supply, Installation and commissioning of

3D letter signage made out of aluminum

composite panel base mild steel 25mm x

25 mm x 18 gauge antirust mild steel

square tube frame cover with 3 mm thick (

0.25 mm aluminum 2.5 mm pure poly

vinylidene fluoride & 0.25 aluminum) base

as per design & colour writing massage (as

directed by Railways) in Tri language made

out of 3 mm thick imported acrylic sheet

2/3 raising 3D letters back side 2 mm clear

acrylic sheet casing capping as per the

design & colour box type acrylic letters

inside fitted with hi-bright water proof & fire

proof four cluster LEDs module (Each LED

SAMSUNG/NICHIA/OSRAM/KREE with all

provisions for setting and arrangement.

N.B-Text massage, Design of letter and

colour of the board shall be approved by

Railways. The price shall cover the cost of

all materials required for the above work

including labour charges. Before supply of

materials, contractor has to take approval

from Sr. DEE(G)/WAT or his authorized

56 56 Supply, erection, testing and commissioning Numbers 4.00 1268.39 5073.56

of 250 mm Exhaust Fan suitable for Air-

conditioned room ventilation with Strong Air

Suction, Rust Proof Body and Dust

Protection Shutters of reputed make as per

approval of Railways. The price also covers

the cost of Supply, erection, testing and

commissioning of 250 mm Exhaust Fan

suitable for Air-conditioned room ventilation

with Strong Air Suction, Rust Proof Body

and Dust Protection Shutters of reputed

make as per approval of Railways. The price

shall cover the cost of all materials required

for the above work including labour

charges. Before supply of materials,

contractor has to take approval from Sr.

DEE(G)/WAT or his authorized official.

WALTAIR DIVISION-ENGINEERING/ECOR

57 57 Supply, erection, testing and commissioning Numbers 2.00 2420.38 4840.76

of surface mounting circular portico 15W-

20W LED luminaries of nature white make:

Havells or similar as per approval of

Railways. The price also covers the cost of

Supply, erection, testing and commissioning

of surface mounting circular portico 15W-

20W LED luminaire of nature white of

reputed make: Philips, Bajaj, CG, Eveready,

Wipro, Jaquar with a minimum warranty

period of 2 years [Price includes supply &

installation etc. of fittings on ceiling with

required hardware and fasteners and

making electrical connection to make the

light functional but except point wiring] as

per approval of Railways. The price shall

cover the cost of all materials required for

the above work including labour charges.

Before supply of materials, contractor has

to take approval from Sr. DEE(G)/WAT or his

authorized official.