WBPWD/EE/BED/34/e-IT of 2018_19

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the welded chairs incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65 inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] a) Avg. run- 8 mtr.

S&F of suspended prismatic decobay LED light fittings with 1no 11/9 W LED lamp (Make-Philips.. Cat no DN193B or equivalent of wipro/CG) as per direction of EIC.

S and L of 3X1.5 sqmm PVC insulated FR wire as per GS

S and L of 2X2.5 +1X1.5 sqmm sqmm PVC insulated FR wire as per GS

S and L of 2 X 4 +1X2.5 sqmm sqmm PVC insulated FR wire as per GS

Dismantling the existing switch board and refixing the same in new position as per direction of EIC

Supply and fixing of AC starter( North -West) in suitable modular box and 16A power plug with swich in the suitable modular box separately as per instruction of EIC

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch and 5A modular plug with switch on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch and 6A modular plug with switch Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top and 03 nos 6A plug and switch GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(computer board) [N.B. (1) The Agency must procure the materials from the Manufacture/OEM or from their authorized. Sales channel so that the standard warranty/support of the Manufacture/OEM becomes applicable to the products to be delivered and installed by them, (2) Documents that authenticates such procurement from the Manufacture/OEM or from their authorized sales channel and standard warranty/support should be sent from the e-mail of the Manufacture/OEM/authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill (3) If any refurbished material is supplied and installed, penal action will be taken as per exixting rules]

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

MAHESWAR ELECTRICAL INDUSTRIES

PHINIX

S. N. ENTERPRISE

STANDARD BUILDERS