Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹15.4 L+₹1.2 L (8.13%)Rejected-AOC | L2 | Rejected-AOC Second lowest |
Tender Value
₹16.9 L
EMD Value
₹42,219
Closing Date
25 Apr 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
KLC- Construction Division, TVPM
GENERAL KLC III Assembly Building Rectification of roof leakage at various levels of Assembly building and other allied works Rectification of Expansion joint at various levels of Assembly Building and other allied works
2023_PWD_571834_1
PWD/BLDG/TR/17442/2022
Open Tender
Civil Works - Buildings
Item Rate
150 days
KLC- Construction Division, TVPM
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹42,219
Yes
30 Jun 2023
13 Apr 2023
29 Apr 2023
13 Apr 2023
25 Apr 2023
13 Apr 2023
Amount
Civil Works
15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
OD128355/2022-2023:Dismantling exixting APP (15.23.2)
OD128354/2022-2023:Extra labour for neatly dressing the dismantled surface and sides of expansion joint mechanically etc. complete for treatment process.
OD128353/2022-2023:Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete (21.19.3) above 20mm width. (Backer rod + PU sealant)
OD128352/2022-2023:Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per direction of Engineer-In- Charge. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system. Mixing of Epoxy Adhesive Shalibind PPE premix each component individually. Proportion 2 parts of component A to 1 part of component B by weight and mix about for 3 minutes with a low speed drill and paddle mixer until uniform in colour. Apply shalibond PPE adhesive on both sides of the joint. Place the activated HS Flex Tape sheet / strip in position on to the epoxy adhesive and using a hard roller force the sheeting into the epoxy and exclude air through the special perforations until the adhesive comes through the perforations. Roof Joint up to 100 mm gap. (5.46.1)
4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
OD128351/2022-2023:Providing and laying thermocol sheet of 20mm thick for expansion jont system etc complete. as per the direction in charge.
OD128350/2022-2023:Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant of approved quality as per direction of Engineer-in-charge complete (21.19.3) above 20mm width. (PU sealent only)
22.20.1:Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 250C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 230C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 1500C. Cold flexibility shall be up to - 2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick
13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)
OD144218/2022-2023:Providing and fixing PVC pipes including jointing of pipes with one step pvc solvent cement, complete as per direction of Engineer-in-Charge 160mm dia 4Kgf/cm2 - External Work- Exposed on wall (50.18.7.6.2)
OD144220/2022-2023:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 160 mm dia long bend (50.18.9.22.4)
OD144221/2022-2023:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 160 mm dia Elbow (50.18.9.22.1)
OD144222/2022-2023:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 160 mm dia 45 "Bend (50.18.9.22.2)
OD144223/2022-2023:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -160mm dia Tee (data from 50.18.9.22.5)
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD209834/2022-2023:cleaning the concrete /similar surface using pressure pump including cost of labour , hire charge for machine , neccessory flexible pipe ,
15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
OD209835/2022-2023:plumber encaged for plmbing works
OD209836/2022-2023:Labour encaged for cleaning the terace after works
OD209837/2022-2023:Providing and applying priming coat of SBR top of concrete roof in two coat @3.5 lit/10m2, ,one coat of self priming of elastomeric water proofing liqid dilution with water in the ratio of 1:1. the operation shall be carried out afterv scrapping and properly cleaning the surface to remove the loose particle with wire brushes ,complete in all respect as per the direction of engineer in charge .etc complete
OD209838/2022-2023:providing and laying water proofing treatment on roofs of slab by applying cement slurry mixed with water proofing cement compound SBR IN 1:1:3 , Consisting of applying ,after surface prepration , first layer of slurry of cement @1kg /3m2 mixed with water proofing cement compound 1lit/m2 ,laying after vapplying 6 hrs of priming coat , keep the surface clean and free from any source of water . etc complete .
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
SANAL KUMAR
Bidder Name
SANAL KUMAR
ARDEN INFRATECH PRIVATE LIMITED
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_844206.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .